litex-boards/litex_boards/targets/xilinx_kv260.py

#!/usr/bin/env python3

#
# This file is part of LiteX-Boards.
#
# Copyright (c) 2022 Ilia Sergachev <ilia@sergachev.ch>
# SPDX-License-Identifier: BSD-2-Clause

# Build/Use:
# The current support is sufficient to run LiteX BIOS on Cortex-A53 core #0:
# ./xilinx_kv260.py --build --load
# LiteX BIOS can then be executed on hardware using JTAG with the following xsct script from:
# https://github.com/sergachev/litex-template/tree/kv260
# make -f Makefile.kv260 load will build everything and run xsct in the end.
#
# Relies on https://github.com/lucaceresoli/zynqmp-pmufw-builder to create a generic PMU firmware;
# first build will take a while because it includes a cross-toolchain.

import os

from migen import *

from litex.gen import *

from litex_boards.platforms import xilinx_kv260
from litex.build.tools import write_to_file

from litex.soc.interconnect import axi
from litex.soc.interconnect import wishbone

from litex.soc.cores.clock import *
from litex.soc.integration.soc_core import *
from litex.soc.integration.soc import SoCRegion
from litex.soc.integration.builder import *

# CRG ----------------------------------------------------------------------------------------------

class _CRG(LiteXModule):
    def __init__(self, platform, sys_clk_freq, use_ps7_clk=False):
        self.rst    = Signal()
        self.cd_sys = ClockDomain()

        # # #

        if use_ps7_clk:
            self.comb += ClockSignal("sys").eq(ClockSignal("ps"))
            self.comb += ResetSignal("sys").eq(ResetSignal("ps") | self.rst)
        else:
            self.pll = pll = S7PLL(speedgrade=-1)
            self.comb += pll.reset.eq(self.rst)
            pll.register_clkin(platform.request(platform.default_clk_name), platform.default_clk_freq)
            pll.create_clkout(self.cd_sys, sys_clk_freq)
            # Ignore sys_clk to pll.clkin path created by SoC's rst.
            platform.add_false_path_constraints(self.cd_sys.clk, pll.clkin)

# BaseSoC ------------------------------------------------------------------------------------------

class BaseSoC(SoCCore):
    mem_map = {"csr": 0xA000_0000}  # default GP0 address on ZynqMP

    def __init__(self, sys_clk_freq=100e6, **kwargs):
        platform = xilinx_kv260.Platform()

        # CRG --------------------------------------------------------------------------------------
        use_ps7_clk = (kwargs.get("cpu_type", None) == "zynqmp")
        self.crg = _CRG(platform, sys_clk_freq, use_ps7_clk)

        # SoCCore ----------------------------------------------------------------------------------
        if kwargs.get("cpu_type", None) == "zynqmp":
            kwargs["integrated_sram_size"] = 0
        SoCCore.__init__(self, platform, sys_clk_freq, ident="LiteX SoC on KV260", **kwargs)

        # ZynqMP Integration -----------------------------------------------------------------------
        if kwargs.get("cpu_type", None) == "zynqmp":
            self.cpu.config.update({
                'PSU_MIO_36_DIRECTION'                   : 'out',
                'PSU_MIO_37_DIRECTION'                   : 'in',
                'PSU__UART1__BAUD_RATE'                  : 115200,
                'PSU__CRL_APB__UART1_REF_CTRL__DIVISOR0' : 10,
            })
            # generated from board xml presets
            self.cpu.config.update({
                'PSU__CRF_APB__ACPU_CTRL__FREQMHZ' : '1333.333',
                'PSU__DDRC__BANK_ADDR_COUNT'       : '2',
                'PSU__DDRC__BG_ADDR_COUNT'         : '1',
                'PSU__DDRC__BRC_MAPPING'           : 'ROW_BANK_COL',
                'PSU__DDRC__BUS_WIDTH'             : '64 Bit',
                'PSU__DDRC__CL'                    : '16',
                'PSU__DDRC__CLOCK_STOP_EN'         : '0',
                'PSU__DDRC__COL_ADDR_COUNT'        : '10',
                'PSU__DDRC__COMPONENTS'            : 'Components',
                'PSU__DDRC__CWL'                   : '12',
                'PSU__DDRC__DDR4_ADDR_MAPPING'     : '0',
                'PSU__DDRC__DDR4_CAL_MODE_ENABLE'  : '0',
                'PSU__DDRC__DDR4_CRC_CONTROL'      : '0',
                'PSU__DDRC__DDR4_T_REF_MODE'       : '0',
                'PSU__DDRC__DDR4_T_REF_RANGE'      : 'Normal (0-85)',
                'PSU__DDRC__DEVICE_CAPACITY'       : '8192 MBits',
                'PSU__DDRC__DIMM_ADDR_MIRROR'      : '0',
                'PSU__DDRC__DM_DBI'                : 'DM_NO_DBI',
                'PSU__DDRC__DRAM_WIDTH'            : '16 Bits',
                'PSU__DDRC__ECC'                   : 'Disabled',
                'PSU__DDRC__FGRM'                  : '1X',
                'PSU__DDRC__LP_ASR'                : 'manual normal',
                'PSU__DDRC__MEMORY_TYPE'           : 'DDR 4',
                'PSU__DDRC__PARITY_ENABLE'         : '0',
                'PSU__DDRC__PER_BANK_REFRESH'      : '0',
                'PSU__DDRC__PHY_DBI_MODE'          : '0',
                'PSU__DDRC__RANK_ADDR_COUNT'       : '0',
                'PSU__DDRC__ROW_ADDR_COUNT'        : '16',
                'PSU__DDRC__SELF_REF_ABORT'        : '0',
                'PSU__DDRC__SPEED_BIN'             : 'DDR4_2400R',
                'PSU__DDRC__STATIC_RD_MODE'        : '0',
                'PSU__DDRC__TRAIN_DATA_EYE'        : '1',
                'PSU__DDRC__TRAIN_READ_GATE'       : '1',
                'PSU__DDRC__TRAIN_WRITE_LEVEL'     : '1',
                'PSU__DDRC__T_FAW'                 : '30.0',
                'PSU__DDRC__T_RAS_MIN'             : '33',
                'PSU__DDRC__T_RC'                  : '47.06',
                'PSU__DDRC__T_RCD'                 : '16',
                'PSU__DDRC__T_RP'                  : '16',
                'PSU__DDRC__VREF'                  : '1',
                'PSU__FPGA_PL0_ENABLE'             : '1',
                'PSU__PMU__GPO4__ENABLE'           : '0',  # these 2 are disabled for uart1
                'PSU__PMU__GPO5__ENABLE'           : '0',
                'PSU__UART1__PERIPHERAL__ENABLE'   : '1',
                'PSU__UART1__PERIPHERAL__IO'       : 'MIO 36 .. 37',
            })

            # Connect Zynq AXI master to the SoC
            wb_gp0 = wishbone.Interface()
            self.submodules += axi.AXI2Wishbone(
                axi          = self.cpu.add_axi_gp_master(),
                wishbone     = wb_gp0,
                base_address = self.mem_map["csr"])
            self.bus.add_master(master=wb_gp0)
            self.bus.add_region("sram", SoCRegion(
                origin = self.cpu.mem_map["sram"],
                size   = 2 * 1024 * 1024 * 1024)  # DDR
            )
            self.bus.add_region("rom", SoCRegion(
                origin = self.cpu.mem_map["rom"],
                size   = 512 * 1024 * 1024 // 8,
                linker = True)
            )
            self.constants["CONFIG_CLOCK_FREQUENCY"] = 1333333008

    def finalize(self, *args, **kwargs):
        super(BaseSoC, self).finalize(*args, **kwargs)
        if self.cpu_type != "zynqmp":
            return

        libxil_path = os.path.join(self.builder.software_dir, 'libxil')
        os.makedirs(os.path.realpath(libxil_path), exist_ok=True)
        lib = os.path.join(libxil_path, 'embeddedsw')
        if not os.path.exists(lib):
            os.system("git clone --depth 1 https://github.com/Xilinx/embeddedsw {}".format(lib))

        os.makedirs(os.path.realpath(self.builder.include_dir), exist_ok=True)

        for header in [
            'XilinxProcessorIPLib/drivers/uartps/src/xuartps_hw.h',
            'lib/bsp/standalone/src/common/xil_types.h',
            'lib/bsp/standalone/src/common/xil_assert.h',
            'lib/bsp/standalone/src/common/xil_io.h',
            'lib/bsp/standalone/src/common/xil_printf.h',
            'lib/bsp/standalone/src/common/xstatus.h',
            'lib/bsp/standalone/src/common/xdebug.h',
            'lib/bsp/standalone/src/arm/ARMv8/64bit/xpseudo_asm.h',
            'lib/bsp/standalone/src/arm/ARMv8/64bit/xreg_cortexa53.h',
            'lib/bsp/standalone/src/arm/ARMv8/64bit/xil_cache.h',
            'lib/bsp/standalone/src/arm/ARMv8/64bit/xil_errata.h',
            'lib/bsp/standalone/src/arm/ARMv8/64bit/platform/ZynqMP/xparameters_ps.h',
            'lib/bsp/standalone/src/arm/common/xil_exception.h',
            'lib/bsp/standalone/src/arm/common/gcc/xpseudo_asm_gcc.h',
        ]:
            shutil.copy(os.path.join(lib, header), self.builder.include_dir)

        write_to_file(os.path.join(self.builder.include_dir, 'bspconfig.h'), """
#ifndef BSPCONFIG_H
#define BSPCONFIG_H

#define EL3 1
#define EL1_NONSECURE 0

#endif
""")
        write_to_file(os.path.join(self.builder.include_dir, 'xparameters.h'), '''
#ifndef XPARAMETERS_H
#define XPARAMETERS_H

#include "xparameters_ps.h"

#define STDIN_BASEADDRESS 0xFF010000
#define STDOUT_BASEADDRESS 0xFF010000
#define XPAR_PSU_DDR_0_S_AXI_BASEADDR 0x00000000
#define XPAR_PSU_DDR_0_S_AXI_HIGHADDR 0x7FFFFFFF
#define XPAR_PSU_DDR_1_S_AXI_BASEADDR 0x800000000
#define XPAR_PSU_DDR_1_S_AXI_HIGHADDR 0x87FFFFFFF
#define XPAR_CPU_CORTEXA53_0_TIMESTAMP_CLK_FREQ 99999001

#endif
''')


# Build --------------------------------------------------------------------------------------------

def main():
    from litex.build.parser import LiteXArgumentParser
    parser = LiteXArgumentParser(platform=xilinx_kv260.Platform, description="LiteX SoC on KV260.")
    parser.add_target_argument("--sys-clk-freq", default=100e6, type=float, help="System clock frequency.")
    parser.set_defaults(cpu_type="zynqmp")
    parser.set_defaults(no_uart=True)
    args = parser.parse_args()

    soc = BaseSoC(
        sys_clk_freq = args.sys_clk_freq,
        **parser.soc_argdict
    )
    builder = Builder(soc, **parser.builder_argdict)
    if args.cpu_type == "zynqmp":
        soc.builder = builder
        builder.add_software_package('libxil')
        builder.add_software_library('libxil')
    if args.build:
        builder.build(**parser.toolchain_argdict)

    if args.load:
        prog = soc.platform.create_programmer()
        prog.load_bitstream(builder.get_bitstream_filename(mode="sram"))


if __name__ == "__main__":
    main()