soc/cores: use reset_less on datapath/configuration CSRStorages.

litex/soc/cores/clock.py

@@ -157,8 +157,8 @@ class XilinxClocking(Module, AutoCSR):
         self.drp_read   = CSR()
         self.drp_write  = CSR()
         self.drp_drdy   = CSRStatus()
-        self.drp_adr    = CSRStorage(7)
-        self.drp_dat_w  = CSRStorage(16)
+        self.drp_adr    = CSRStorage(7,  reset_less=True)
+        self.drp_dat_w  = CSRStorage(16, reset_less=True)
         self.drp_dat_r  = CSRStatus(16)
 
         # # #

litex/soc/cores/icap.py

@@ -18,8 +18,8 @@ class ICAP(Module, AutoCSR):
     reloaded from SPI Flash by writing 0x00000000 at address @0x4.
     """
     def __init__(self, simulation=False):
-        self.addr = CSRStorage(5,  description="ICAP Write Address.")
-        self.data = CSRStorage(32, description="ICAP Write Data.")
+        self.addr = CSRStorage(5,  reset_less=True, description="ICAP Write Address.")
+        self.data = CSRStorage(32, reset_less=True, description="ICAP Write Data.")
         self.send = CSRStorage(description="ICAP Control.\n\n Write ``1`` send a write command to the ICAP.")
         self.done = CSRStatus(reset=1, description="ICAP Status.\n\n Write command done when read as ``1``.")
 
@@ -91,7 +91,7 @@ class ICAPBitstream(Module, AutoCSR):
     the ICAPE2.
     """
     def __init__(self, fifo_depth=8, icap_clk_div=4, simulation=False):
-        self.sink_data  = CSRStorage(32)
+        self.sink_data  = CSRStorage(32, reset_less=True)
         self.sink_ready = CSRStatus()
 
         # # #

litex/soc/cores/pwm.py

@@ -25,7 +25,7 @@ class PWM(Module, AutoCSR):
 
         # # #
 
-        counter = Signal(32)
+        counter = Signal(32, reset_less=True)
 
         sync = getattr(self.sync, clock_domain)
         sync += [
@@ -36,7 +36,7 @@ class PWM(Module, AutoCSR):
                 ).Else(
                     pwm.eq(0)
                 ),
-                If(counter == (self.period - 1),
+                If(counter >= (self.period - 1),
                     counter.eq(0)
                 )
             ).Else(
@@ -51,10 +51,10 @@ class PWM(Module, AutoCSR):
     def add_csr(self, clock_domain):
         self._enable = CSRStorage(description="""PWM Enable.\n
             Write ``1`` to enable PWM.""")
-        self._width  = CSRStorage(32, description="""PWM Width.\n
+        self._width  = CSRStorage(32, reset_less=True, description="""PWM Width.\n
             Defines the *Duty cycle* of the PWM. PWM is active high for *Width* ``{cd}_clk`` cycles and
             active low for *Period - Width* ``{cd}_clk`` cycles.""".format(cd=clock_domain))
-        self._period = CSRStorage(32, description="""PWM Period.\n
+        self._period = CSRStorage(32, reset_less=True, description="""PWM Period.\n
             Defines the *Period* of the PWM in ``{cd}_clk`` cycles.""".format(cd=clock_domain))
 
         n = 0 if clock_domain == "sys" else 2

litex/soc/cores/spi.py

@@ -131,7 +131,7 @@ class SPIMaster(Module, AutoCSR):
         self._status   = CSRStatus(fields=[
             CSRField("done", size=1, offset=0, description="SPI Xfer done when read as ``1``.")
         ], description="SPI Status.")
-        self._mosi     = CSRStorage(self.data_width, description="SPI MOSI data (MSB-first serialization).")
+        self._mosi     = CSRStorage(self.data_width, reset_less=True, description="SPI MOSI data (MSB-first serialization).")
         self._miso     = CSRStatus(self.data_width,  description="SPI MISO data (MSB-first de-serialization).")
         self._cs       = CSRStorage(fields=[
             CSRField("sel", len(self.cs), reset=1, description="Write ``1`` to corresponding bit to enable Xfer for chip.")

litex/soc/cores/spi_flash.py

@@ -88,7 +88,7 @@ class SpiFlashDualQuad(SpiFlashCommon, AutoCSR):
         assert spi_width >= 2
 
         if with_bitbang:
-            self.bitbang = CSRStorage(4, fields=[
+            self.bitbang = CSRStorage(4, reset_less=True, fields=[
                 CSRField("mosi", description="Output value for MOSI pin, valid whenever ``dir`` is ``0``."),
                 CSRField("clk", description="Output value for SPI CLK pin."),
                 CSRField("cs_n", description="Output value for SPI CSn pin."),
@@ -229,7 +229,7 @@ class SpiFlashSingle(SpiFlashCommon, AutoCSR):
         self.bus = bus = wishbone.Interface()
 
         if with_bitbang:
-            self.bitbang = CSRStorage(4, fields=[
+            self.bitbang = CSRStorage(4, reset_less=True, fields=[
                 CSRField("mosi", description="Output value for SPI MOSI pin."),
                 CSRField("clk", description="Output value for SPI CLK pin."),
                 CSRField("cs_n", description="Output value for SPI CSn pin."),

litex/soc/cores/xadc.py

@@ -114,8 +114,8 @@ class XADC(Module, AutoCSR):
         self.drp_read   = CSR()
         self.drp_write  = CSR()
         self.drp_drdy   = CSRStatus()
-        self.drp_adr    = CSRStorage(7)
-        self.drp_dat_w  = CSRStorage(16)
+        self.drp_adr    = CSRStorage(7,  reset_less=True)
+        self.drp_dat_w  = CSRStorage(16, reset_less=True)
         self.drp_dat_r  = CSRStatus(16)
 
         # # #