145 lines
5.8 KiB
Markdown
145 lines
5.8 KiB
Markdown
# Litex Documentation: Document your LiteX SoC Automatically
|
|
|
|
Litex lets you take a synthesized SoC and generate full
|
|
register-level documentation. Additionally, it will generate `.svd` files,
|
|
suitable for use with various header generation programs.
|
|
|
|
## Required Software
|
|
|
|
You must have `sphinx` and `sphinx.wavedrom` installed in order to build
|
|
the documentation. These can be installed with pip:
|
|
|
|
```
|
|
$ pip3 install sphinxcontrib-wavedrom sphinx
|
|
```
|
|
|
|
## Usage
|
|
|
|
To document your modules, import the `doc` module and call `doc.generate_docs(soc, path)`.
|
|
You can also generate an SVD file. For example:
|
|
|
|
```python
|
|
from litex.soc.doc import generate_docs, generate_svd
|
|
|
|
...
|
|
soc = BaseSoC(platform)
|
|
builder = Builder(soc)
|
|
vns = builder.build()
|
|
soc.do_exit(vns)
|
|
generate_docs(soc, "build/documentation")
|
|
generate_svd(soc, "build/software")
|
|
```
|
|
|
|
After you build your design, you will have a Sphinx documentation source available
|
|
in the above directory. To build this into a target document, use `sphinx-build`.
|
|
|
|
For example, if `sphinx-build` is in your path, you can run:
|
|
|
|
`sphinx-build -M html build/documentation/ build/documentation/_build`
|
|
|
|
`sphinx-build` may be located in `~/.local/bin/` depending on your installation environment.
|
|
|
|
You can then verify the contents by opening the file `build/documentation/_build/html/index.html`
|
|
|
|
## Documenting your Registers
|
|
|
|
You can add documentation to your registers by defining your `CSRStorage` and `CSRStatus` registers with an additional `field` list. For example:
|
|
|
|
```python
|
|
self.bitbang = CSRStorage(4, fields=[
|
|
CSRField("mosi", description="Output value for MOSI..."
|
|
CSRField("clk", description="Output value for SPI CLK..."
|
|
CSRField("cs_n", description="Output value for SPI C..."
|
|
CSRField("dir", description="Sets the dir...", values=[
|
|
("0", "OUT", "SPI pins are all output"),
|
|
("1", "IN", "SPI pins are all input"),
|
|
])
|
|
], description="""Bitbang controls for SPI output. Only
|
|
standard 1x SPI is supported, and as a result all
|
|
four wires are ganged together. This means that it
|
|
is only possible to perform half-duplex operations,
|
|
using this SPI core.""")
|
|
```
|
|
|
|
There are several interesting properties here:
|
|
|
|
* The first argument to a `CSRStorage` or `CSRStatus` is the bit width.
|
|
* You can pass a list of `CSRField` objects, which will get turned into bit fields
|
|
* Both `CSRStorage` and `CSRStatus` support a freeform `description` property that will be used to describe the overall register.
|
|
|
|
A `CSRField` object has the following properties:
|
|
|
|
* `name`: The short name of the register. This should be just a few characters long, as it will be used in the register diagram as well as accessor objects. **Required**
|
|
* `size`: The size of this field. This is optional, and defaults to `1`
|
|
* `offset`: The offset of this particular field. If unspecified, defaults to following the previous field. Use this to add gaps to your register definitions, for example to have reserved fields.
|
|
* `reset`: If specified, the value of this field at reset. Defaults to `0`.
|
|
* `description`: A textual description of this register. This is optional, but should be specified because it provides critical information to the user about what this field does.
|
|
* `pulse`: If `True`, then this value is `1` only for one clock cycle after the user writes a `1` to this field. This is especially useful for `START` bits used to initiate operations, or `RESET` bits used to clear an operation.
|
|
* `access`: The accessibility of this field. One of `CSRAccess.ReadWrite`, `CSRAccess.WriteOnly`, or `CSRAccess.ReadOnly`
|
|
* `values`: If present, a list of tuples of values. The first field is the numeric value, with `x` for `don't care`. The second field, if present, is the short name of the value. The final field is a textual description of the value. For example:
|
|
|
|
```python
|
|
[
|
|
("0b0000", "disable the timer"),
|
|
("0b0001", "slow", "slow timer"),
|
|
("0b1xxx", "fast timer"),
|
|
]
|
|
```
|
|
|
|
## Further Module Documentation
|
|
|
|
You can add additional documentation to your module with the `ModuleDoc` class. Add it to your base object.
|
|
|
|
**To use further Module Documentation, your Module must inherit from `AutoDoc`**. For example:
|
|
|
|
```python
|
|
from litex.soc.integration.doc import AutoDoc, ModuleDoc
|
|
class DocExample(Module, AutoCSR, AutoDoc):
|
|
def __init__(self):
|
|
self.mydoc = ModuleDoc("Some documentation")
|
|
```
|
|
|
|
You may pass a single string to the constructor, in which case the first line becomes the title, or you may pass a separate `title` and `body` parameters to the constructor. For example:
|
|
|
|
```python
|
|
self.intro = ModuleDoc("""Introduce ModuleDoc
|
|
|
|
This is an example of how to document using ModuleDoc. An additional
|
|
section will get added to the output documentation for this module,
|
|
with the title ``Introduce ModuleDoc`` and with this paragraph
|
|
as a body""")
|
|
```
|
|
|
|
Note that the default documentation format is `rst`. You can switch to markdown by passing `format="markdown"` to the constructor, however support is not very good.
|
|
|
|
### External Documentation
|
|
|
|
You can have external documentation by passing `file` to the constructor.
|
|
For example:
|
|
|
|
```python
|
|
self.extra_doc = ModuleDoc(file="extra_doc.rst")
|
|
```
|
|
|
|
This will be included at build-time.
|
|
|
|
### Using Python Docstrings
|
|
|
|
You can also simply have your module inherit from `ModuleDoc`, in which case
|
|
the documentation will be taken from the docstring. For example:
|
|
|
|
```python
|
|
from litex.soc.integration.doc import AutoDoc, ModuleDoc
|
|
class DocExample(Module, AutoCSR, AutoDoc, ModuleDoc):
|
|
"""
|
|
Automatically Documented Module
|
|
|
|
This module will be automatically documented, and included in the
|
|
generated module documentation output. You can add additional
|
|
ModuleDoc objects to this module, in order to add further subsections
|
|
to the output docs.
|
|
"""
|
|
def __init__(self):
|
|
pass
|
|
```
|