Merge pull request #19 from wallclimber21/dhrystone_slow

dhrystone with registered memory
This commit is contained in:
Clifford Wolf 2016-09-04 12:09:57 +02:00 committed by GitHub
commit 990f876a5b
2 changed files with 122 additions and 1 deletions

View File

@ -13,6 +13,9 @@ endif
test: testbench.vvp dhry.hex
vvp -N testbench.vvp
test_slow_mem: testbench_slow_mem.vvp dhry.hex
vvp -N testbench_slow_mem.vvp
timing: timing.txt
grep '^##' timing.txt | gawk 'x != "" {print x,$$3-y;} {x=$$2;y=$$3;}' | sort | uniq -c | \
gawk '{printf("%03d-%-7s %2d %-8s (%d)\n",$$3,$$2,$$3,$$2,$$1);}' | sort | cut -c13-
@ -24,6 +27,10 @@ testbench.vvp: testbench.v ../picorv32.v
iverilog -o testbench.vvp testbench.v ../picorv32.v
chmod -x testbench.vvp
testbench_slow_mem.vvp: testbench_slow_mem.v ../picorv32.v
iverilog -o testbench_slow_mem.vvp testbench_slow_mem.v ../picorv32.v
chmod -x testbench_slow_mem.vvp
timing.vvp: testbench.v ../picorv32.v
iverilog -o timing.vvp -DTIMING testbench.v ../picorv32.v
chmod -x timing.vvp
@ -50,7 +57,7 @@ endif
dhry_1.o dhry_2.o: CFLAGS += -Wno-implicit-int -Wno-implicit-function-declaration
clean:
rm -rf *.o *.d dhry.elf dhry.map dhry.bin dhry.hex testbench.vvp testbench.vcd timing.vvp timing.txt
rm -rf *.o *.d dhry.elf dhry.map dhry.bin dhry.hex testbench.vvp testbench.vcd timing.vvp timing.txt testbench_slow_mem.vvp
.PHONY: test clean

View File

@ -0,0 +1,114 @@
`timescale 1 ns / 1 ps
module testbench;
reg clk = 1;
reg resetn = 0;
wire trap;
always #5 clk = ~clk;
initial begin
repeat (100) @(posedge clk);
resetn <= 1;
end
wire mem_valid;
reg mem_valid_q;
wire mem_instr;
reg mem_ready;
wire [31:0] mem_addr;
wire [31:0] mem_wdata;
wire [3:0] mem_wstrb;
reg [31:0] mem_rdata;
picorv32 #(
.BARREL_SHIFTER(1),
.ENABLE_FAST_MUL(1),
.ENABLE_DIV(1),
.PROGADDR_RESET('h10000),
.STACKADDR('h10000)
) uut (
.clk (clk ),
.resetn (resetn ),
.trap (trap ),
.mem_valid (mem_valid ),
.mem_instr (mem_instr ),
.mem_ready (mem_ready ),
.mem_addr (mem_addr ),
.mem_wdata (mem_wdata ),
.mem_wstrb (mem_wstrb ),
.mem_rdata (mem_rdata ),
.mem_la_read (),
.mem_la_write(),
.mem_la_addr (),
.mem_la_wdata(),
.mem_la_wstrb()
);
reg [7:0] memory [0:256*1024-1];
initial $readmemh("dhry.hex", memory);
always @(posedge clk) begin
mem_ready <= 1'b0;
mem_rdata[ 7: 0] <= 'bx;
mem_rdata[15: 8] <= 'bx;
mem_rdata[23:16] <= 'bx;
mem_rdata[31:24] <= 'bx;
if (mem_valid & !mem_valid_q) begin
if (|mem_wstrb) begin
mem_ready <= 1'b1;
case (mem_addr)
32'h1000_0000: begin
`ifndef TIMING
$write("%c", mem_wdata);
$fflush();
`endif
end
default: begin
if (mem_wstrb[0]) memory[mem_addr + 0] <= mem_wdata[ 7: 0];
if (mem_wstrb[1]) memory[mem_addr + 1] <= mem_wdata[15: 8];
if (mem_wstrb[2]) memory[mem_addr + 2] <= mem_wdata[23:16];
if (mem_wstrb[3]) memory[mem_addr + 3] <= mem_wdata[31:24];
end
endcase
end
else begin
mem_ready <= 1'b1;
mem_rdata[ 7: 0] <= memory[mem_addr + 0];
mem_rdata[15: 8] <= memory[mem_addr + 1];
mem_rdata[23:16] <= memory[mem_addr + 2];
mem_rdata[31:24] <= memory[mem_addr + 3];
end
end
mem_valid_q <= mem_valid;
end
initial begin
$dumpfile("testbench.vcd");
$dumpvars(0, testbench);
end
always @(posedge clk) begin
if (resetn && trap) begin
repeat (10) @(posedge clk);
$display("TRAP");
$finish;
end
end
`ifdef TIMING
initial begin
repeat (100000) @(posedge clk);
$finish;
end
always @(posedge clk) begin
if (uut.dbg_next)
$display("## %-s %d", uut.dbg_ascii_instr ? uut.dbg_ascii_instr : "pcpi", uut.count_cycle);
end
`endif
endmodule