41 lines
1.3 KiB
Markdown
41 lines
1.3 KiB
Markdown
# Verilog SPI
|
|
|
|
Verilog SPI master and slave that supports all modes and variable width
|
|
via parameters.
|
|
|
|
## License
|
|
|
|
All code in this project is licensed to the terms of the Mozilla Public
|
|
License, v.2.0. A copy of this license may be found in the file `COPYING`. You
|
|
can obtain one at https://mozilla.org/MPL/2.0/.
|
|
|
|
All Verilog source in this project is dual-licensed under the MPL v2.0
|
|
and the CERN-OHL-W v2.0.
|
|
|
|
## Tests
|
|
|
|
Run `./mk.sh` in `tests/` to generate and run tests.
|
|
|
|
## Modules
|
|
|
|
"master_ss" and others include a timer that will assert the Slave Select
|
|
pin and wait a set number of clock cycles before starting the SPI transfer.
|
|
|
|
## SPI Modes
|
|
|
|
Modes are denoted by `modePH`, where `P` is the polarity (0 for normal,
|
|
1 for inverted) and `H` for phase:
|
|
|
|
* `H = 0` means the device reads on a rising edge and writes on a falling
|
|
edge.
|
|
* `H = 1` means the device reads on a falling edge and writes on a rising
|
|
edge.
|
|
|
|
Although these modules support all SPI modes, they are labeled slightly
|
|
differently from other SPI modes. The phase factor is denoted in terms
|
|
of falling and rising edges, not in terms of leading and trailing edges.
|
|
This means that polarity also flips the phase term, so a mode 3 device
|
|
is a mode 10 device. Devices with regular clock polarity are unaffected,
|
|
so a mode 0 device is a mode 00 device, and a mode 1 device is a mode
|
|
01 device.
|