Commit Graph

22 Commits

Author SHA1 Message Date
Florent Kermarrec 3e9e970076 Add aliexpress prefix to boards from aliexpress that seem to be from the same unknown vendor. 2022-04-21 10:06:11 +02:00
Florent Kermarrec 23b1b15486 Add initial/minimal Pluto SDR support. 2022-04-14 12:13:03 +02:00
John Simons b8b0aead28 Added basic support for Arduino MKR Vidor 4000 2022-03-21 18:54:29 -07:00
Gwenhael Goavec-Merou 537f04a13d alinx_axu2gca: new board
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
2022-01-25 07:35:42 +01:00
Florent Kermarrec 2c6ce12154 spartan_edge_accelerator: Add seeedstudio prefix and seeedsstudio to vendors list. 2022-01-06 09:06:27 +01:00
Florent Kermarrec dc61d383e6 snickerdoodle: Rename to krtkl_snicker_doodle and do minor cosmetic changes. 2022-01-03 17:09:17 +01:00
Florent Kermarrec 4e03f66fad efinix_trion_t120_bga576_dev_kit: Remove debug, integrate LPDDR3 as done on other targets.
Also lower sys_clk_freq since seems to cause issue with DRAM at 100MHz: Needs to be investigated.
2021-11-12 18:04:30 +01:00
Florent Kermarrec ceaaf67dfd Add initial Fairwaves XTRX support (SoC with JTAG-UART and PCIe Gen2 X1). 2021-11-05 14:52:45 +01:00
Florent Kermarrec 9543b5efae marble/marble_mini: Add berkeleylab prefix. 2021-11-04 18:42:16 +01:00
Alain Lou 610e82d774
Add initial RZ-EasyFPGA support! (#270) 2021-09-21 09:55:22 +02:00
Gwenhael Goavec-Merou 7ccae3332d Add runber support 2021-09-15 06:50:57 +02:00
Florent Kermarrec 88534c6689 tang_nano_4k: Fix typo in sipeed. 2021-09-08 23:02:39 +02:00
Florent Kermarrec ce52c8c5ed beaglewire: Fix typo in qwertyembedded. 2021-09-08 21:29:29 +02:00
Florent Kermarrec ecebe7e267 Add initial SiSpeed Tang Nano 4K support (Led blink only for now...).
./sispeed_tang_nano_4k.py --build --load

Build with Gowin EDA.
Load with OpenFPGALoader.
2021-09-08 19:36:46 +02:00
Florent Kermarrec 35df77258a beaglewire: Rename to quertyembedded_beaglewire. 2021-09-01 09:36:09 +02:00
Martin Troiber 22e823d756 Initial PYNQ Z2 support 2021-08-13 16:23:39 +02:00
Florent Kermarrec 5027b270fd __init__.py: Add muselab to vendors. 2021-05-07 09:10:51 +02:00
Florent Kermarrec 3bb84b0071 Add initial Blackmagic Decklink Mini 4K support (with UART, DDR3, PCIe, Video Out).
Mini Monitor 4K and Mini Recorder 4K are almost the same hardware with just changes on
the Video In/Out. For now tests have been done on the Mini Monitor 4K, but the aim  is
support both boards in the same platform/target in the future, thus the mini_4k naming.

These boards could be used as affordable Artix7 dev boards for LiteX, to run Linux with
LiteX (512MB of RAM + a Video Framebuffer) or to create custom systems like a fast software
defined signal generator/recorder directly from a PC over PCIe, custom HDMI/SDI video
cards, etc... lots of possibilities :)
2021-05-06 09:47:01 +02:00
Vegard Storheil Eriksen 2e204285de boards/compat: Skip targets with unsatisfied dependencies.
Fixes #194
2021-04-10 11:41:13 +02:00
Florent Kermarrec 03accabc25 lpddr4_test_board: Add antmicro vendor prefix. 2021-03-31 09:48:23 +02:00
Florent Kermarrec 333fb362ca Move import Compat directly to litex_boards.__init__.py and simplify. 2021-03-25 16:47:47 +01:00
Florent Kermarrec 4213c75e48 init repo with litex official boards 2019-06-10 17:11:36 +02:00