901942bda6
Cleanup for pushing. This commit combined with my litedram fork produces a running basic SoC + bios --=============== SoC ==================--
...
CPU:BUS:E 32-bit @ 4GiB
CSR:16-bit @ 48MT/s (CL-2 CWL-2)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 13.6MiB/s
Read speed: 21.3MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
2022-03-24 07:39:14 -07:00
e445c9ec71
qmtech_5cefa2: make serial pins consistent with other boards
2022-03-24 18:52:28 +07:00
c081177d77
pynq_z1/zybo_z7: Update .xci (With changes from #99 ).
2022-03-24 09:15:36 +01:00
010099b306
Merge pull request #375 from smunaut/adrv2crr
...
ADRV2CRR: Fixing some of my screwups that I just noticed now
2022-03-24 08:37:47 +01:00
bcedf573e0
adi_adrv2crr: Add IO definition for the AD9545 reset line
...
We use PULLUP on it so that the AD9545 is by default held out
of reset without the user having to do anything ...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
cdb78efd3c
adi_adrv2crr: Document I2C devices attached
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
6c31f16df2
adi_adrv2crr: Fix I2C signal assignement
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
bb974ae1af
decklink_quad_hdmi_recorder: Add pcie_lanes parameter and 4x/8x support.
2022-03-23 15:24:49 +01:00
73458ae9d7
decklink_quad_hdmi_recorder: Add Serial/UART pins.
2022-03-23 11:08:51 +01:00
d399f33dda
Merge pull request #374 from smunaut/adrv2crr
...
adi_adrv2crr: Upgrade part to speedgrade 2
2022-03-23 09:09:57 +01:00
4ca527974b
Merge pull request #373 from goran-mahovlic/patch-1
...
faster sdcard boot on 2.0
2022-03-23 08:07:49 +01:00
dc92584681
adi_adrv2crr: Upgrade part to speedgrade 2
...
Even though the schematic and bom call for speedgrade 1, this was only for
the prototypes.
All productions units have been updated to speedgrade 2.
See this thread:
https://ez.analog.com/fpga/f/q-a/112356/adrv9009-zu11eg-speed-grade
And the official HDL project for the board:
https://github.com/analogdevicesinc/hdl/blob/master/projects/adrv9009zu11eg/adrv2crr_fmc/system_project.tcl#L16
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-22 23:36:41 +01:00
ce4b627e3c
targets: Remove l2_size workaround (no longer required).
2022-03-22 19:13:23 +01:00
68c23e9251
faster sdcard boot on 2.0
2022-03-22 17:54:12 +01:00
2a206def0f
targets/ecp5/ddr3: Uniformize cd_sys2x (reset_less).
2022-03-22 17:32:35 +01:00
53c221a1fa
butterstick: set ethernet rx_delay to 0ns
...
The Microchip KSZ9031RNX PHY on the Butterstick has a default 1.2ns
internal RX delay so we shouldn't add the default 2ns MAC delay.
In testing with Linux on vexriscv I haven't seen any difference either
way, but with liteeth in Microwatt I have seen 30%+ packet loss when
receiving from certain ethernet devices (RTL8153 and AX88179 usb-gige
adapters, a GS105 switch didn't show the problem). Setting RX delay=0
resolves the problem. A TX delay is still required by the PHY.
2022-03-22 13:51:03 +08:00
b8b0aead28
Added basic support for Arduino MKR Vidor 4000
2022-03-21 18:54:29 -07:00
9d452b0d74
targets: Create target_group for target arguments.
2022-03-21 18:37:40 +01:00
d90e260414
targets/digilent_atlys: Fix target.
2022-03-21 17:38:02 +01:00
cc8da9d341
targets: Simplify imports and switch to LiteXSocArgumentParser.
...
CPU parameters are now selectively exposed to the user:
./digilent_arty.py --cpu-type=vexriscv_smp --help will show VexRiscv-SMP parameters.
./digilent_arty.py --cpu-type=naxriscv --help will show NaxRiscv parameters.
2022-03-21 16:59:40 +01:00
eb8657f515
gsd_orangecrab: Revert dm_remapping (Useful when built with VexRiscv-SMP and native LiteDRAM interface).
2022-03-18 12:56:13 +01:00
3ebad7f7cc
gsd_orangecrab/butterstick: Add assert on devices.
2022-03-18 10:44:21 +01:00
9faa805ab9
alinx_ax7010: Review/Cleanup.
2022-03-17 11:31:02 +01:00
3aa1042f5f
Merge pull request #367 from ggangliu/zynq_xc7z010
...
Add ALINX AX7010 board support
2022-03-17 09:52:04 +01:00
0f82db26da
rcs_artic_term_bmc_card: Fix is -> ==.
2022-03-17 09:45:47 +01:00
496b2cfab9
targets/gowin: Switch to get_bitstream_filename.
2022-03-17 09:40:10 +01:00
773444a7dd
targets: Switch to get_bios_filename/get_bitstream_filename.
2022-03-17 09:21:05 +01:00
94786cae19
Update and rename xilinx_alinx_ax7010.py to alinx_ax7010.py
2022-03-17 11:24:24 +08:00
0e7145b4a1
Update and rename xilinx_alinx_ax7010.py to alinx_ax7010.py
2022-03-17 11:21:42 +08:00
0745162a29
xilinx_zcu102: Review/Cleanup for consistency with others boards.
...
Also remove INTERNAL_VREF constraints that are not yet useful (required for DRAM).
2022-03-16 18:47:05 +01:00
8003dcdd02
Merge pull request #370 from jwfaye/jwfaye-patch-1
...
add xilinx_zcu102 platform
2022-03-16 18:39:54 +01:00
adbcc2e547
add zcu102 target file
2022-03-16 15:55:37 +01:00
f4a48e51d7
add xilinx_zcu102 platform
2022-03-16 15:37:02 +01:00
9dad1cb244
Rename xilinx_zynq_xc7z010.py to xilinx_alinx_ax7010.py
2022-03-15 15:51:13 +08:00
5365c7fce4
Rename xilinx_zynq_xc7z010.py to xilinx_alinx_ax7010.py
2022-03-15 15:50:09 +08:00
a962d8249f
Merge pull request #366 from gsomlo/gls-nexys-video-sata-pll
...
targets/nexys-video: Add support for sata pll refclk
2022-03-13 12:30:58 +01:00
0ada1e7d55
Merge pull request #365 from antmicro/lpddr4-pin-fix
...
lpddr4_test_board: Fix button pin
2022-03-13 12:29:37 +01:00
9c55773275
Add files via upload
...
Add zynq_xc7z010 board support
2022-03-12 12:33:41 +08:00
4159faf48b
Add files via upload
...
Adding zynq_xc7z010 board support
2022-03-12 12:20:54 +08:00
9f9afeaafa
targets/nexys-video: Add support for sata pll refclk
2022-03-11 14:40:21 -05:00
688377de7c
lpddr4_test_board: Fix button pin
2022-03-11 15:59:43 +01:00
3b74673a93
Merge pull request #363 from curliph/master
...
add Gowin programmer support
2022-03-08 17:26:50 +01:00
f52a915487
lambdaconcept_ecpix5: Add initial Video support at 640x480 (with Terminal/Framebuffer).
...
I2C intialization code adapted from https://github.com/ultraembedded/ecpix-5 .
Tested with:
- python3 -m litex_boards.targets.lambdaconcept_ecpix5 --cpu-type=firev --with-video-terminal --build --load
- python3 -m litex_boards.targets.lambdaconcept_ecpix5 --cpu-type=firev --with-video-framebuffer --build --load
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2022 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Mar 8 2022 15:34:22
BIOS CRC passed (c7fe9ecd)
Migen git sha1: ac70301
LiteX git sha1: 7ebc7625
--=============== SoC ==================--
CPU: FireV-STANDARD @ 75MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128KiB
SRAM: 8KiB
L2: 8KiB
SDRAM: 524288KiB 16-bit @ 300MT/s (CL-6 CWL-5)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Read leveling:
m0, b00: |01110000| delays: 02+-01
m0, b01: |00000000| delays: -
m0, b02: |00000000| delays: -
m0, b03: |00000000| delays: -
best: m0, b00 delays: 02+-01
m1, b00: |01110000| delays: 02+-01
m1, b01: |00000000| delays: -
m1, b02: |00000000| delays: -
m1, b03: |00000000| delays: -
best: m1, b00 delays: 02+-01
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 13.6MiB/s
Read speed: 23.4MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> ident
Ident: LiteX SoC on ECPIX-5 2022-03-08 15:34:19
2022-03-08 15:40:52 +01:00
39e4e211bb
targets/decklink_mini_4k: Add build/use instructions.
2022-03-08 14:14:18 +01:00
2df7fd573c
Update sipeed_tang_nano_9k.py
...
Add Gowin programmer support
2022-03-08 14:04:28 +08:00
6eb906a2ca
Update sipeed_tang_nano_9k.py
...
add Gowin programmer support
2022-03-08 14:00:53 +08:00
4c9bc53a3c
add Win/powershell and WSL support
2022-03-08 13:24:56 +08:00
cadfde4d39
litex_acorn_baseboard: Add SerDes refclk and m2_tx/rx pins.
2022-03-07 18:41:53 +01:00
e5fd58f1af
README: Add adi_adrv2crr_fmc.
2022-03-07 09:26:24 +01:00
50cc75fd56
Merge pull request #361 from smunaut/adrv2crr
...
adi_adrv2crr: Add support for the ADI ADRV2CRR with ADRV9009-ZU11EG SoM
2022-03-07 09:24:36 +01:00
John Simons
Hans Baier
Florent Kermarrec
Sylvain Munaut
Goran Mahovlic
Matt Johnston
Yonggang Liu
Joseph Faye
Gabriel Somlo
Robert Szczepanski
curliph