37783ff9fd
colorlight_5a_75e: Fix _connectors_v6_0/j16 first pin (thanks @WhichWayWazzit).
2022-03-07 09:16:07 +01:00
ec28ca8fa3
adi_adrv2crr: Add support for the ADI ADRV2CRR with ADRV9009-ZU11EG SoM
...
This is a carrier board with a SoM mounted on it.
There is also an FMC connector that can accept another
AD-FMCOMMS8-EBZ to get two more ADRV9009 RFIC but support for
that is not added yet.
Note that the PCIe support requires :
- Change the .xci in the litepcie to use the right Quad
- Revert litex 3c34039b731b42e27e2ee6c8e399e5eb8f3a058f so the
timing constrainst of litepcie apply correctly
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-03 22:17:09 +01:00
0f2e13fdf7
sqrl_fk33: Add HBM2 support (from https://github.com/enjoy-digital/fk33_hbm2_test ).
2022-03-03 17:34:48 +01:00
99a66274c8
xilinx_alveo_u280: Switch HBM2 to USPHBM2 now integrated in LiteX.
2022-03-03 16:11:48 +01:00
b80c7a7843
targets/sqrl_acorn: write_latency_calibration now disabled by default, no longer required.
2022-03-03 15:50:53 +01:00
26a7f13a7f
Merge pull request #360 from antmicro/fix-i2c-antmicro-datacenter
...
antmicro_datacenter: fix i2c pads assignment
2022-03-01 19:49:50 +01:00
7933e9462e
antmicro_datacenter: fix i2c pads assignment
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2022-03-01 16:35:15 +01:00
ddd040bc42
README: Switch to python3 -m litex_boards.targets.<board> and remove .py in boards list.
2022-03-01 14:08:34 +01:00
89a80e713e
README: Update boards picture with reduced jpg version.
2022-03-01 14:03:00 +01:00
7a5fe4c221
efinix_titanium_ti60_f225_dev_kit: Update iobank_info with the values used in the video example design.
2022-03-01 14:01:43 +01:00
2450d8db4f
tools: Remove extract_xdc_pins, has only been useful for Alveo boards and could be integrated in a Gist.
2022-03-01 14:00:42 +01:00
240932d464
Merge pull request #359 from antmicro/rdimm
...
antmicro datacenter: fix pins and increase freq
2022-03-01 13:58:50 +01:00
db2d83ea29
antmicro_datacenter: use 100 MHz and add i2c master
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2022-03-01 13:00:36 +01:00
0b80890119
antmicro_datacenter: add 1 cycle of latency for RCD IC
2022-03-01 12:43:08 +01:00
d6fddc746f
antmicro_datacenter: use single rank configuration
2022-03-01 12:43:08 +01:00
9976b47f72
antmicro_datacenter: generate outputs for rowhammer-tester
2022-03-01 12:43:08 +01:00
37905d1f34
antmicro_datacenter: use correct DQS pins
2022-03-01 12:43:08 +01:00
5359fc5bfc
antmicro_datacenter: use A7DDRPHY
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2022-03-01 12:43:08 +01:00
73b5143cec
antmicro_datacenter: add DCI_CASCADE
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2022-03-01 12:43:08 +01:00
1ce0a4b070
README: Update and simplify boards listing.
2022-03-01 11:57:32 +01:00
2c4d31066f
digilent_arty_z7: Defaults to no_uart.
2022-03-01 11:15:30 +01:00
0ceb15938f
digilent_arty_z7: Remove fake serial.
2022-03-01 11:05:59 +01:00
673676e3cb
digilent_arty_a7: Switch to VivadoProgrammer.
2022-03-01 10:48:22 +01:00
e16e5e0591
digilent_arty_z7: Fix add_period_constraint.
2022-03-01 10:30:14 +01:00
1320f3bd23
Merge pull request #357 from DaveBerkeley/colorlight_i9
...
Add ColorLight i9 v7.2
2022-03-01 10:07:55 +01:00
a19c03fa55
targets: Switch to generic/portable HyperRAM core from LiteX.
2022-03-01 09:10:19 +01:00
c9d009c735
Add ColorLight i9 v7.2
2022-02-28 14:08:49 +00:00
11dfe225fa
Merge pull request #356 from fjullien/add_mipi_tx
...
efinix: add MIPI TX to platform Ti60
2022-02-25 16:53:11 +01:00
c54e92c47d
efinix: add MIPI TX to platform Ti60
2022-02-25 15:15:14 +01:00
2311db18f8
add initial support for kröte fpga board
2022-02-25 14:22:19 +01:00
1623ba5942
targets/stlv7325: Reduce sys_clk_freq to 100MHz.
...
See https://github.com/enjoy-digital/litedram/issues/285 .
2022-02-25 09:04:07 +01:00
872113e1cc
stlv7325: Add SDCard support.
2022-02-24 18:02:43 +01:00
a08f346d90
stlv7325: Add Etherbone support (untested).
2022-02-24 17:43:53 +01:00
b1550f006a
stlv3225: Minor Review/Cleanup, switch to JTAG HS2 programmer.
2022-02-24 17:17:08 +01:00
174d958ca7
Initial support for STLV7325 Kintex-7 board.
2022-02-23 18:28:55 +01:00
6661947d96
Merge pull request #354 from madscientist159/master
...
Add initial support for RCS Arctic Tern boards
2022-02-23 18:06:08 +01:00
1717af68ac
targets/sqrl_acorn/ddr3: Disable write_latency_calibration.
...
Introduce some memtest failures on some boards.
2022-02-23 10:38:43 +01:00
16b9e100ba
Merge pull request #353 from sergachev/zcu216
...
Add Xilinx ZCU216 support
2022-02-22 18:57:31 +01:00
ae4b3c0938
Add initial support for RCS Arctic Tern boards
2022-02-21 20:04:51 -06:00
85397818d9
add Xilinx ZCU216 support
2022-02-21 19:14:13 +01:00
7d84e6e863
efinix_titanium_ti60_t225: Add SPI/Native SDCard support.
...
Both modes working with 8559b88ad8
2022-02-21 10:35:06 +01:00
df36cdbcc9
siglent_sds1104xe: Switch back to native DRAM width (now possible with Nax).
2022-02-18 11:47:08 +01:00
d85f88f42a
siglent_sds1104xe: Reduce DRAM's width to 16-bit for now (to use NaxRiscv).
2022-02-16 17:59:40 +01:00
08a79fa3ac
lattice_ecp5_vip: Minor cleanups, fix CI.
2022-02-15 10:58:38 +01:00
30afe26669
Merge pull request #348 from hubmartin/ecp5-vip
...
Draft: Add Lattice ECP5 VIP board + HDMI output board support
2022-02-15 08:53:57 +01:00
2b1dac0f96
Merge pull request #350 from trabucayre/axu2cga_software
...
Axu2cga software
2022-02-15 08:21:50 +01:00
896884dd21
Merge branch 'master' into axu2cga_software
2022-02-15 08:21:29 +01:00
6bbf8c8268
Merge pull request #351 from sergachev/litex_baseboard_openocd
...
add openocd config for litex acorn baseboard
2022-02-15 08:11:41 +01:00
3f58df9974
platforms/targets: Fix typos.
2022-02-14 17:26:46 +01:00
b53b79821e
platforms: Expose toolchain parameter on all platforms to ease switching to alternative/open-source toolchains.
2022-02-14 11:35:18 +01:00
Florent Kermarrec
Sylvain Munaut
Alessandro Comodi
Piotr Binkowski
Karol Gugala
Dave Berkeley
Franck Jullien
inc
Andrew Gillham
Raptor Engineering Development Team
Ilia Sergachev