Florent Kermarrec
bd4e92ad13
targets: cleanup, uniformize build arguments between targets.
2020-11-12 11:46:00 +01:00
Florent Kermarrec
2b17dc1b89
target: add rst signal to CRG to allow full reset of the SoC on reboot command.
2020-11-04 11:13:42 +01:00
Florent Kermarrec
8d26c241cd
kc705: revert sys_clk_freq to 125MHz.
2020-11-02 19:51:48 +01:00
Florent Kermarrec
babf638c2b
targets/nexys_video: add SATA support.
2020-11-02 19:43:25 +01:00
Florent Kermarrec
e950a4a588
targets/kc705: update sata pads.
2020-10-30 17:12:59 +01:00
Florent Kermarrec
a410e447e1
targets/kc705/sata: enable write support.
2020-10-30 14:51:40 +01:00
Florent Kermarrec
f9252fdd45
targets/kc705: simplify SATA using LiteX's add_sata integration method.
2020-10-29 10:16:40 +01:00
Florent Kermarrec
7da8628fba
targets/kc705: switch SATA to gen2.
2020-10-28 19:09:30 +01:00
Florent Kermarrec
931f6667ac
targets/kc705: add initial SATA support.
2020-10-26 15:15:24 +01:00
Florent Kermarrec
814e7630e4
targets/xilinx: use generic name for idelay clk (avoid clk200, clk400, etc...) since we somtimes want to change it.
2020-10-13 12:10:29 +02:00
Florent Kermarrec
c3ea04b6e9
targets/s7/us: update sdram (manual cmd_latency no longer needed).
2020-10-12 18:46:21 +02:00
Florent Kermarrec
1781be166a
general: add SPDX License identifier to header and specify files are part of LiteX-Boards.
2020-08-23 15:00:17 +02:00
Florent Kermarrec
869ceadacb
targets: use platform.request_all on LedChaser.
2020-08-06 20:04:03 +02:00
Florent Kermarrec
7a48a61605
targets: add indentifier on all targets.
2020-06-30 18:11:04 +02:00
Florent Kermarrec
eeba64d7b2
targets: use soc.build_name in load/flash bitstream.
2020-05-21 09:12:29 +02:00
Florent Kermarrec
6f22f082ff
targets: add LedChaser on platforms with user_leds.
...
Default to Chaser mode and similar user interface than GPIOOut.
2020-05-08 22:16:13 +02:00
Florent Kermarrec
2d9543b65e
targets: add build/load parameters on all targets.
2020-05-05 15:11:47 +02:00
Florent Kermarrec
a8a42c55c9
targets/kc705: manual DDRPHY_CMD_DELAY adjustment no longer needed.
2020-04-25 11:08:05 +02:00
Florent Kermarrec
3fb3ba18e8
targets: switch to add_ethernet method instead of EthernetSoC.
2020-03-21 18:29:52 +01:00
Florent Kermarrec
83e6fb29f8
targets: switch to SoCCore/add_sdram instead of SoCSDRAM.
2020-03-21 12:43:39 +01:00
Florent Kermarrec
b89af28a05
targets/kc705: use DDRPHY_CMD_DELAY to center write leveling.
2020-02-27 12:58:52 +01:00
Florent Kermarrec
4edf196911
targets/EthernetSoC: be sure memory region is added before adding Wishbone Slave (required by new SoC)
2020-02-11 17:45:35 +01:00
Florent Kermarrec
8211aca2e8
Avoid Official/Partner/Community differentiation: use same directory for all platforms/targets.
...
We initially wanted to provide different level of support for the platforms/targets, mainly
to avoid too much maintenance and let each contributor update its contributed platforms and
targets, but it's easier to update all platforms/targets all-together when LiteX evolves or
changes (and that's what has been done on litex-boards since the creation of the repository).
So let just simplify things and avoid this differentiation.
2020-02-03 09:36:30 +01:00