e23ac0251a
targets/sipeed_tang_mega_138k: HDMI support
2023-11-05 16:36:59 +01:00
e90c08cb30
platforms/sipeed_tang_mega_138k: adding dock io and DVI RX/TX
2023-11-05 16:26:33 +01:00
e9fd7433a6
platforms/sipeed_tang_mega_138k: adding module connectors
2023-11-05 16:25:38 +01:00
e9f26e1729
platforms/sipeed_tang_mega_138k: swapping serial pins
2023-11-05 16:23:59 +01:00
8792dd8e53
target/analog_pocket: Remove debug (Will be investigated externally).
2023-10-27 15:32:36 +02:00
554cdaab73
Merge pull request #541 from hansfbaier/master
...
QMTech boards: make Artix7 bitstream/platform commands conditional on toolchain
2023-10-24 08:41:31 +02:00
57a345cc75
tidy QMTech 7series boards, add missing bistream compression
2023-10-24 08:26:35 +07:00
0d560bc240
targets/siglent_sds1104xe: Review.
2023-10-23 19:25:12 +02:00
71d8b17fff
Merge pull request #543 from trabucayre/siglent_sds1104xe_etherbone
...
targets/siglent_sds1104xe: simplify etherbone by using new etherbone's params to specify hybrid mode
2023-10-23 19:20:32 +02:00
26d112b094
targets/siglent_sds1104xe: simplify etherbone by using new etherbone's params to specify hybrid mode
2023-10-23 19:07:37 +02:00
afbf9eb8c9
target/xxx: remove with-uartbone, add_uartbone and deal with case where uartbone is required inconditionnally
2023-10-23 17:43:13 +02:00
a6f3c5276e
target/xxx: remove with-jtagbone, add_jtagbone and deal with case where jtagbone is required inconditionnally
2023-10-23 17:16:57 +02:00
41351a845a
Merge pull request #526 from Chandler-Kluser/master
...
Added QMTECH RP2040 Daughterboard
2023-10-23 11:23:44 +02:00
5f694166ce
platforms/sipeed_tang_primer_25k: swap UART TX & RX, fix TX pin (J1:20 -> J1:21)
2023-10-19 06:26:10 +02:00
a4fc45bba6
targets/efinix_titanium_ti60_f225_dev_kit: adding jtagbone support (`litex_server --jtag --jtag-config openocd_titanium_ft4232.cfg`)
2023-10-18 09:11:54 +02:00
eae62a60ac
target/analog_pocket: Fix.
2023-10-17 21:40:46 +02:00
dcf6db905a
prog/openocd_titanium_ft4232: openocd config file for efinix titanium (litex_server / jtag)
2023-10-17 18:34:51 +02:00
cc19078650
targets/analog_pocket: Disable debug for CI.
2023-10-17 15:23:58 +02:00
f86ba2dea0
targets/analog_pocket: Add debug code for framebuffer (wip).
2023-10-17 13:18:07 +02:00
9ae224a2a7
sipeed_tang_primer_25k: new board
2023-10-17 07:45:40 +02:00
3a75f6cf79
Merge pull request #537 from rniwase/master
...
xilinx_zcu102: Add pin definitions for DDR4 SDRAM and FMC connectors, add litedram to the target.
2023-10-14 20:14:53 +02:00
9fb388407a
targets/xilinx_zcu102: Add litedram to the target.
2023-10-14 00:00:26 +09:00
842819d832
platforms/xilinx_zcu102: Add pin definitions for DDR4 SDRAM and FMC connectors.
2023-10-13 23:53:10 +09:00
e0e8600db4
fix help text
2023-10-12 11:21:20 -04:00
ec2f9480b8
targets/analog_pocket: Fix indent on videophy/cores.
2023-10-09 11:59:32 +02:00
6386f290e9
targets/analog_pocket: Add --video-colorbars/video-terminal/video-framebuffer arguments.
2023-10-09 10:59:15 +02:00
dec25b7ce9
targets/analog_pocket: Add initial Video support.
...
From https://github.com/tpwrules/pocket_linux .
2023-10-09 10:14:00 +02:00
371234b369
platforms/analog_pocket: Add Video Scaler pins definitions and output_term/current strength on SDRAM pins.
...
From https://github.com/tpwrules/pocket_linux .
2023-10-09 10:12:38 +02:00
7359a331eb
analog_pocket: Add 1:2 (HalfRate) SDRAM support.
2023-10-06 19:25:42 +02:00
d00810c983
sds1104xe: Fix typo.
2023-10-06 19:25:22 +02:00
149ed9630c
platforms/ocp_tap_timecard: Add with_multiboot parameter to enable/disable multiboot images generation.
...
Generating multiboot images is not very fast, disabling it for quick P&R iterations can be useful.
2023-10-03 19:03:42 +02:00
aa853d5a48
platforms/efinix_trion_t20_bga256_dev_kit: CON4 cleanup
2023-10-02 19:19:50 +02:00
bc6f6d869e
platforms/efinix_trion_t20_bga256_dev_kit: CON3 (LVDS RX) / CON4 (LVDS TX)
2023-10-02 18:51:53 +02:00
3d7a1dd152
analog_pocket: +x.
2023-10-02 16:20:09 +02:00
6f0cd56109
update to match zcu102 constraint spec
2023-09-28 11:11:21 +02:00
fd6aee0250
targets/sqrl_acorn: Drive pcie_clkreq_n (Thanks @myftptoyman).
2023-09-27 11:06:50 +02:00
928c1a2539
platforms/sipeed_tang_mega_138k: Fix default_clk_name/period.
2023-09-26 21:07:21 +02:00
29018a8382
Merge pull request #523 from Icenowy/tangmega138k
...
[RFC] sipeed_tang_mega_138k: new board
2023-09-26 19:12:44 +02:00
5f8ac853b1
Resolve High Density bank IOStandard error
...
This resolves the following error during `build` on Vivado 2023.1:
```ERROR: [DRC BIVB-1] Bank IO standard Support: Bank 47 has incompatible IO(s) because: The LVDS I/O standard is not supported for banks of type High Density. Move the following ports or change their properties:
clk125_p```
2023-09-25 12:50:30 +02:00
1fb317840f
platforms/ocp_tap_timecard: Add clk10 and som_led.
2023-09-22 08:33:04 +02:00
c14d66cb6b
analog_pocket: Add Serial (to fix CI) and add to board list.
2023-09-21 10:11:55 +02:00
3df677cfeb
Add initial Analog Pocket platform/target with Clk/SDRAM, able to run a simple SoC with SDRAM over JTAG-UART.
...
$ ./analog_pocket.py --uart-name=jtag_uart --build --load
$ litex_term jtag --jtag-config=openocd_usb_blaster.cfg
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2023 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Sep 21 2023 08:53:57
BIOS CRC passed (1e2b3f44)
LiteX git sha1: 7d738737
--=============== SoC ==================--
CPU: VexRiscv @ 50MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128.0KiB
SRAM: 8.0KiB
L2: 8.0KiB
SDRAM: 64.0MiB 16-bit @ 50MT/s (CL-2 CWL-2)
MAIN-RAM: 64.0MiB
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 15.6MiB/s
Read speed: 22.1MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex>
2023-09-21 09:19:57 +02:00
531e13dcd6
prog: Remove too specific openocd_max10_blaster/2.cfg.
2023-09-21 09:17:00 +02:00
5064c65dac
targets: Switch to openocd_usb_blaster/2.cfg.
2023-09-21 09:16:24 +02:00
33d1569fb8
prog: Add generic openocd_usb_blaster/2 OpenOCD config files.
2023-09-21 09:15:30 +02:00
a0b7811c54
platforms/ti60_f225: Add n parameter to rgmii_ethernet_qse_ios to allow having multiple adapters.
2023-09-11 10:45:28 +02:00
c26f76e8cb
Fixed misplacement of platform file
2023-09-03 15:49:38 -03:00
632bab937e
Update qmtech_artix7_fgg676.py
2023-09-01 05:03:44 -03:00
d8b006568a
Update qmtech_artix7_fgg676.py
2023-09-01 04:53:07 -03:00
8b0c5b78ee
Added QMTECH RP2040 Daughterboard
...
Added new QMTECH Daughterboard with RP2040, which can be found in [AliExpress](https://www.aliexpress.com/item/1005005094654777.html ).
Documentation can be found [here](https://github.com/ChinaQMTECH/DB_FPGA_with_RP2040 )
2023-09-01 04:47:09 -03:00
Gwenhael Goavec-Merou
Florent Kermarrec
Hans Baier
Gwenhael Goavec-Merou
rniwase
darryln
Liana Koleva
Chandler Klüser
Chandler Klüser