40f47f447a
create liteethmini and move liteeth to a separate repo ( https://github.com/enjoy-digital/liteeth )
...
LiteEthMini is a subset of LiteEth intended to be used with a CPU and a software stack.
2015-09-08 01:33:57 +02:00
3f5d475b7b
remove litepcie_phy_wrappers submodule
2015-09-07 13:20:16 +02:00
5301a1776d
targets: remove USBSoC from minispartan6 (example available here: https://github.com/enjoy-digital/scarab-soc )
2015-09-07 12:47:40 +02:00
8e8cc8e5a6
move liteusb to a separate repo ( https://github.com/enjoy-digital/liteusb )
2015-09-07 12:44:47 +02:00
e49a3c20c8
move litesata to a separate repo ( https://github.com/enjoy-digital/litesata )
2015-09-07 12:27:40 +02:00
bbeb8a466d
move litescope to a separate repo ( https://github.com/enjoy-digital/litescope )
2015-09-07 12:04:04 +02:00
35e3853f6e
move litepcie to a separate repo ( https://github.com/enjoy-digital/litepcie )
2015-09-07 11:11:43 +02:00
bedf3ed9a6
misoclib/soc: fix add_constant when used for strings
2015-09-01 16:57:50 +02:00
a4808ace6f
litecores: remove unneeded AutoCSR inheritance in example designs (thanks William D. Jones)
2015-08-26 22:36:48 +02:00
e91ce85cfd
litescope/core/port: fix missing self.comb...
2015-08-24 20:12:39 +02:00
27b1dd7d9e
litescope/core/port: fix EdgeDetector CSRs names
2015-08-24 19:40:53 +02:00
fd31e6ae61
litescope/core/port: fix LiteScopeEdgeDetector (refactoring issues)
2015-08-24 18:23:38 +02:00
f3d68a54d5
liteth/phy: simplify clk_freq in LiteEthPHY autodetect function (thanks Sebastien)
2015-08-22 16:30:42 +02:00
a1e4183b3f
sdram/phy/s6ddrphy: fix comment on S6QuarterRateDDRPHY
2015-08-22 12:50:41 +02:00
de87d65f68
sdram/module: add P3R1GE4JGF DDR2 (Atlys) and MT41J128M16 DDR3 (Opsis, Novena) modules.
2015-08-22 12:42:44 +02:00
50e857e99c
sdram/phy/s6ddrphy: add S6QuarterRateDDRPHY to run DDR3 at higher frequencies.
...
Built on top of S6HalfRateDDRPHY, exposes a 4 phases DFI interface to the controller with a 2x slower clock.
Validated on the Numato Lab opsis board (50MHz sys_clk/ DDR400), should also work on the Novena laptop (same DDR3 module).
2015-08-22 12:17:48 +02:00
8bb30a8620
liteeth/phy: fix autodetect (clk_freq not necessary passed in kwargs)
2015-08-22 12:08:49 +02:00
158fbe49ac
sdram/phy/s6ddrphy: rename S6DDRPHY to S6HalfRateDDRPHY and use ORed wrdata_en/rddata_en (the controller already manages that)
2015-08-22 11:47:26 +02:00
b8f3fd53f1
README: small update
2015-08-22 11:39:54 +02:00
4acab79987
sdram/module: cleanup indent
2015-08-20 22:15:06 +02:00
63538a7d04
litecores: add -Ob option to make.py (allow to build with yosys for example)
2015-08-19 01:17:37 +02:00
3d3cd128d8
liteeth/phy: only use clk_freq for LiteEthPHYGMIIMII in autodetect
2015-08-19 01:17:35 +02:00
6683485841
tools/flterm: replace int(a, 16) with int(a, 0) for --kernel-adr
2015-08-18 15:47:09 +02:00
a9d40e790c
tools/flterm.py: cleanup kernel-adr argument parsing
2015-08-13 13:25:02 +02:00
d8fd4fe725
Use shutil rather then rm -rf command.
2015-08-13 14:54:58 +08:00
eeda704462
Use shell for globbing in clean.
2015-08-13 14:54:58 +08:00
d00e774986
All commands run should be checked.
2015-08-13 14:54:58 +08:00
5a3f4e4179
tools/flterm.py: some cleanup and fix last frame data that was not transmitted
2015-08-12 11:41:08 +02:00
abf9a58a3a
unwinder: update.
2015-08-10 16:23:02 +03:00
d88904b3d7
libdyld: add const qualifiers.
2015-08-08 15:21:09 +03:00
cf3a9e04b8
libbase: add const qualifiers.
2015-08-08 12:16:27 +03:00
1b34f48660
libdyld: all ELF relocations may refer to the current object.
2015-08-07 11:05:28 +03:00
3cf46671e9
liteeth/phy: rename rgmii to s6rgmii since specific to Spartan6
...
Also remove autodetection support for RGMII. For it to work we would need to pass the device we are building for.
2015-08-05 10:33:08 +02:00
4b8d9b67f3
liteeth: add rgmii phy
2015-08-05 00:50:55 +02:00
c03ef526eb
sdram/phy/s6ddrphy: add DDR3 support
2015-08-04 12:29:42 +02:00
52fba05e26
sdram/phy/initsequence: add burst chop 4 (BC4) for DDR3
...
This is needed for half rate controllers with burst length of 4.
For best efficiency quarter rate controllers should be used.
2015-08-04 11:19:20 +02:00
64f1368938
libunwind: build with -DNDEBUG.
2015-08-02 15:42:02 +03:00
b1445ae743
dyld: style
2015-08-02 12:35:48 +08:00
6a1b0b342c
libdyld: handle existing but undefined symbols during lookup.
2015-08-02 05:56:11 +03:00
36e03ec8a8
libdyld: R_*_RELATIVE never specify a symbol.
2015-08-02 05:29:23 +03:00
10773db08d
libdyld: handle unaligned relocations.
2015-08-01 20:26:27 +03:00
8a0beb4cfb
unwinder: update.
2015-08-01 20:16:59 +03:00
344e1bc6de
libdyld: add support for R_OR1K_{NONE,32,GLOB_DAT}.
2015-08-01 20:16:10 +03:00
d625c43591
libbase: also pass exception PC and EA to exception handler.
2015-08-01 20:15:42 +03:00
13a50a93d9
libbase: downstream users should provide fprintf.
2015-08-01 20:14:09 +03:00
3f7f0a3151
libdyld: fix dyld_lookup algorithm.
2015-08-01 17:21:31 +03:00
d43e470e3c
libdyld: fix DT_HASH address calculation.
2015-08-01 15:49:33 +03:00
04934ff3f1
software/common.mak: use PYTHON env var
2015-07-31 18:31:04 +08:00
eb643f1132
Export _cache_init from crt0.S.
2015-07-31 02:40:52 +03:00
90314052fa
Implement a dynamic linker.
2015-07-31 02:38:38 +03:00
Florent Kermarrec
Tim 'mithro' Ansell
whitequark
Sebastien Bourdeauducq