9a026c09f9
soc/add_sdcard: remove limitation to 7-Series but only add clocker for it.
2020-06-03 13:47:39 +02:00
c311f98cfa
soc/add_sdcard: emulator clocking moved to litesdcard.
2020-06-03 13:43:44 +02:00
382f239e74
software/libsdcard: keep SDCARD_DEBUG enabled for now, fix typos.
2020-06-03 13:38:34 +02:00
20bbdaaf6b
soc/add_sdcard: remove Timer (unused).
2020-06-03 13:13:07 +02:00
ab447df922
software/liblitesdcard: review/simplify (code is over-complicated, revert part of the old code and write a minimal test for now).
2020-06-03 13:12:45 +02:00
ee4056cfec
software/liblitesdcard: remove sdtimer functions (unused).
...
sdtimer was used to evaluate performance but is no longer used.
2020-06-03 11:11:45 +02:00
ecfa44e5aa
Merge pull request #556 from antmicro/mglb/symbiflow-fixes
...
Symbiflow toolchain support: fix part name and clock frequency
2020-06-02 16:33:40 +02:00
635a61e306
targets/arty: use sys_clk_freq = 60MHz for Symbiflow toolchain
2020-06-02 16:23:08 +02:00
5071ef3ef7
build/xilinx/symbiflow: remap part name
2020-06-02 16:23:08 +02:00
55723f138b
software/liblitedram: revert sdrsw() in sdrlevel: this is still required for sdrlevel command.
2020-06-02 16:14:53 +02:00
ddcf68c062
Merge pull request #553 from ozbenh/sim-autoinit
...
sdram: Unconditionally switch to SW control before inits
2020-06-02 15:49:00 +02:00
47bb3d7990
Merge pull request #557 from antmicro/mor1kx_linux_booting
...
bios: boot: Boot linux on mor1kx with external device tree and rootfs
2020-06-02 15:45:52 +02:00
10ff9d765f
CHANGES: update and change added features order.
2020-06-02 15:05:46 +02:00
f1e7d73e48
bios: boot: Boot linux on mor1kx with external device tree and rootfs
2020-06-02 14:57:48 +02:00
5d202ddb97
test: update.
2020-06-02 13:51:48 +02:00
01f7947b56
targets: rename gateware-toolchain parameter to toolchain.
2020-06-02 13:44:23 +02:00
245985d6c5
targets/arty: integrate symbiflow changes to avoid duplication.
2020-06-02 13:37:19 +02:00
89106873db
build/generic_platform: add default_clk constraints only when used.
2020-06-02 13:34:09 +02:00
0cd613ccb8
build/xilinx/symbiflow: reuse .xdc generation from Vivado to avoid duplication, fix copyright.
2020-06-02 13:21:12 +02:00
80ec5eca76
boards/arty: remove specific arty_symbiflow platform and adapt target to use standard platform.
2020-06-02 12:18:12 +02:00
af928b2626
xilinx/simbiflow: add simple symbiflow_device re-mapping.
2020-06-02 12:15:38 +02:00
5104d07a13
Merge pull request #551 from antmicro/mglb/symbiflow-toolchain-xilinx-7-support
...
Add Symbiflow toolchain support for Xilinx 7-series
2020-06-02 11:55:33 +02:00
77139289f8
Merge pull request #552 from ozbenh/memspeed-long
...
sdram: Use unsigned long for memory test
2020-06-01 15:23:03 -07:00
6239eac130
sdram: Use unsigned long for memory test
...
This makes it twice as fast on 64-bit CPUs when using a 64-bit bus :-)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2020-06-02 08:08:42 +10:00
7434376c07
test/test_targets: add arty_symbiflow
...
Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com>
2020-06-01 21:41:56 +02:00
ae121aacdf
targets: add arty_symbiflow
...
Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com>
2020-06-01 21:41:56 +02:00
2bb2fbdbea
platforms: add arty_symbiflow
...
Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com>
2020-06-01 21:41:17 +02:00
bd702397d1
build/xilinx: add Symbiflow toolchain support
...
Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com>
2020-06-01 21:36:28 +02:00
a116578c82
Merge pull request #550 from antmicro/jboc/spd-read
...
bios/litedram: Add command to verify SPD contents with the one used during generation
2020-06-01 21:17:40 +02:00
b98a919226
Merge pull request #549 from antmicro/mglb/fix-vivado-yosys
...
build/xilinx: do not assume build name is "top"
2020-06-01 19:58:01 +02:00
4a6256a50d
sdram: Unconditionally switch to SW control before inits
...
This will allow the controller to default to HW control which means
the sim model can be used without specific initializations
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2020-06-01 23:44:09 +10:00
a4e8323485
build/xilinx: do not assume build name is "top"
2020-06-01 13:28:54 +02:00
5cc7a98845
Merge pull request #547 from gsomlo/gls-fix-sdcard-status
...
soc/software/litesdcard: update for response register back to 128 bits
2020-06-01 11:37:05 +02:00
395af900fd
interconnect/wishbone/DownConverter: skip accesses on slave when sel==0 and simplify.
...
Improve efficiency for 64-bit CPU accessing only the 32-bit LSBs/MSBs.
2020-06-01 11:06:23 +02:00
511832a911
soc/interconnect/axi: generate wishbone.sel for reads.
2020-06-01 10:58:45 +02:00
4f82a36afd
soc/software: only keep 32-bit CSR alignment support.
...
64-bit support was added for 64-bit CPU because of limitation of the hardware
on CSR accesses. Now that the Wihhbone2CSR bus handles wishbone.sel, this is no
longer required.
2020-06-01 10:01:14 +02:00
28290efd00
soc/software/litesdcard: update for response register back to 128 bits
...
The additional (17th) byte returned via the response register was
ignored by software (bios and kernel), so LiteSDCard was updated
to only return the (original, useful) 128 bits.
This patch updates the LiteSDCard code in the LiteX bios to only
expect those 128 bits, and to do so in a manner that's portable
across CSR data widths and alignments.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-05-30 18:12:51 -04:00
759367752c
wishbone/wishbone2csr: use wishbone.sel on CSR write.
...
CSR write is only done if wishbone.sel != 0. This should avoid the need for 64-bit
CSR alignment on 64-bit CPUs since a 64-bit Wishbone write access targeting only the
32-bit LSB or MSB will be splitted in 2x32-bit accesses: one with sel=0xf, one with sel=0.
2020-05-30 15:22:02 +02:00
b1ec092e88
soc/software/litesdcard: use new send register to send command and remove CSR8_CMD_FIX.
2020-05-29 20:15:02 +02:00
efcba14b1b
platforms/nexys_video: add spisdcard pins.
2020-05-29 19:36:33 +02:00
119ce56f6c
targets/nexys_video: add spi-sdcard and sdcard support.
2020-05-29 19:26:29 +02:00
cc5950178d
plaforms/nexys_video: keep up to date with litex-boards.
2020-05-29 19:26:03 +02:00
5cc564fb8f
targets: simplify Ethernet/Etherbone integration on targets with both.
2020-05-29 19:22:35 +02:00
55c7461e7b
bios/cmds/cmd_litesdcard: rewrite comments/descriptions.
2020-05-29 18:51:24 +02:00
6cb03963f3
bios/main: replace / with -.
2020-05-29 18:40:54 +02:00
5dd5f97b88
Merge pull request #545 from gsomlo/gls-fix-mmptr
...
csr: fix simple accessor alignment
2020-05-29 18:32:30 +02:00
3e1b17d459
csr: fix simple accessor alignment
...
MMPTR should always follow CSR alignment, NOT CSR data width.
(the latter merely indicates how many bits within a MMPTR are
actually populated).
Fixup for commit #4a5072a.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-05-29 12:03:05 -04:00
6c1e2d8413
software/liblitesdcard: replace hexdump with dump_bytes already available in the BIOS.
2020-05-29 17:15:20 +02:00
9e068a7494
soc/add_sdcard: add with_emulator parameter to use SDCard emulator (from Google Project Vault) and integrate it in litex_sim.
2020-05-29 16:07:40 +02:00
a433c837e0
bios/litedram: add option to verify SPD EEPROM memory contents
2020-05-29 15:14:54 +02:00
Florent Kermarrec
Mariusz Glebocki
Mateusz Holenko
Tim Ansell
Benjamin Herrenschmidt
Gabriel Somlo
Jędrzej Boczar