Florent Kermarrec
c3d902ef42
soc/software/bios/sdram: add Kintex Ultrascale support
2017-11-08 12:59:38 +01:00
Florent Kermarrec
dcae61b6de
README: update copyrights
2017-11-01 21:12:42 +01:00
Florent Kermarrec
2665a83288
soc/interconnect/stream: expose depth on SyncFIFO
2017-10-30 22:56:09 +01:00
Tim Ansell
876f3d2c8f
Merge pull request #34 from mithro/uart-irq-change
...
Change the default IRQs.
2017-10-30 13:54:19 -07:00
Tim 'mithro' Ansell
56ef229029
Make the interrupt dicts read only.
2017-10-29 19:45:52 -07:00
Tim 'mithro' Ansell
295e78ee9e
Make it harder to have conflicting interrupts.
2017-10-29 19:45:52 -07:00
Tim 'mithro' Ansell
ff72757b87
Bump the IRQ for liteeth based targets.
2017-10-29 19:45:52 -07:00
Tim 'mithro' Ansell
73e0036b99
Change the default IRQs.
...
* Reserve IRQ 0 to be used as a "non-maskable interrupt" (NMI) in the
future.
* Use IRQ 2 for the LiteX. This matches the standard mor1k config which
connects the UART to IRQ 2.
This change is needed for Linux running on LiteX as it gets grumpy with
using IRQ 0 for anything other other than an NMI.
2017-10-29 19:45:52 -07:00
Tim 'mithro' Ansell
e07bd71b16
build/xilinx: Fixing settings finding.
...
* Better error messages.
* Search correct directories;
- XXX/Vivado/<version>
- XXX/<version>/ISE_DS/
2017-10-16 18:25:51 +11:00
Tim Ansell
a6958065cf
Merge pull request #32 from felixheld/fix-readme
...
remove Migen as requirement for LiteX from the quick start guide
2017-10-16 15:07:49 +11:00
Felix Held
8d87dfba42
remove Migen as requirement for LiteX from the quick start guide
...
Migen currently isn't a dependency for LiteX
2017-10-15 22:27:09 +02:00
Florent Kermarrec
db6c88bbef
soc/interconnect/stream: don't use reset less on last and first signals (not reseting these signals can cause troubles in some specific cases)
2017-10-12 11:30:56 +02:00
enjoy-digital
eecd6a156e
Merge pull request #31 from mithro/bios-fix
...
Couple of small fixes.
2017-10-07 08:46:38 +02:00
Tim 'mithro' Ansell
2c013948b1
Output better error message for flash_proxy.
2017-10-07 12:14:00 +11:00
Tim 'mithro' Ansell
279ec488e3
bios: Print location jumping too.
...
Makes it easier to understand what is happening (and that the BIOS is
jumping to the right place).
2017-10-06 20:38:44 +11:00
Tim 'mithro' Ansell
8152673d18
common: Compile with debugging symbols on.
...
Debugging symbols are useful when using GDB :-)
2017-10-06 20:38:44 +11:00
Tim 'mithro' Ansell
b1b6a74170
or1k: Use EXCEPTION_STACK_SIZE of 256bytes.
...
or1k defines a 128 byte "red zone" after the stack that can not be
touched by the exception handler.
We also need 128 bytes to store the 32 registers.
2017-10-06 20:38:44 +11:00
Tim 'mithro' Ansell
07a9df3586
bios: Declare dependency on linked in .a files.
2017-10-06 20:38:44 +11:00
enjoy-digital
d95d561737
Merge pull request #30 from cr1901/icestorm
...
Add Icestorm backend and iCEStick
2017-10-04 09:47:32 +02:00
William D. Jones
e558473119
Add iCEStick board. Tested with litescope.
2017-10-04 01:59:53 -04:00
William D. Jones
c3383f47ba
Port IceStorm backend from Migen.
2017-10-03 22:48:44 -04:00
Florent Kermarrec
ba1bf20f37
soc/cores: add cordic
2017-09-29 12:07:43 +02:00
enjoy-digital
878380abba
Merge pull request #28 from enjoy-digital/eb-docs-2
...
More docs for etherbone packet fields.
2017-09-26 12:33:57 +02:00
Florent Kermarrec
e42ab27f30
gen/fhdl/verilog: revert _printcomb_simulation and _printcomb_regular (needed for icarus simulation) and add Finish command
2017-09-13 13:47:25 +02:00
Florent Kermarrec
2a8f6edded
soc/integration/soc_core: add ident_version parameter to allow adding soc version to identifier
2017-09-06 15:39:54 +02:00
Tim Ansell
3a656c61d9
More docs for etherbone packet fields.
...
Info comes from http://www.ohwr.org/attachments/1669/spec.pdf dated 24 July 2012
2017-09-01 23:57:34 +10:00
enjoy-digital
797a91270f
Merge pull request #27 from enjoy-digital/etherbone-docs
...
Adding a little docs to field descriptions.
2017-09-01 15:54:38 +02:00
Tim Ansell
c125ea6440
Adding a little docs to field descriptions.
2017-09-01 23:27:58 +10:00
Florent Kermarrec
8f3dcf90ab
soc/software/bios/sdram: add optional memtest debug traces
2017-08-18 09:42:27 +02:00
Florent Kermarrec
c02de1632b
soc/cores: fix vivado issue with SPIRegister (at least with Vivado 2017.x+, mosi was not generated correctly), create cs_n signal if pads does not exists
2017-07-27 18:22:01 +02:00
Florent Kermarrec
04646b24ed
soc/interconnect/stream: fix make_m2s for reset_less
2017-07-24 18:18:35 +02:00
Florent Kermarrec
9509d9e361
gen/genlib/cdc/gearbox: fix possible pointers overlap by removing AsyncResetSynchronizers.
...
read/write clocks don't have the same frequencies, using AsyncResetSynchronizers cause differents delay when releasing reset and can cause pointers overlap.
2017-07-24 13:39:08 +02:00
enjoy-digital
f25e46c428
Merge pull request #26 from q3k/diamond-linux-support
...
Add Diamond toolchain support for Linux.
2017-07-20 14:41:05 +02:00
Sergiusz Bazanski
503df5e93e
Add Diamond toolchain support for Linux.
...
This tries to replicate the same setup as in the Windows buildsystem. We
also remove the Jedecgen step, as it doesn't seem to be supported nor
necessary in newer versions of Diamond.
2017-07-20 13:21:10 +01:00
Florent Kermarrec
756554371a
soc/tools/remote/litex_server: allow multiple instance of server
2017-07-19 21:18:12 +02:00
Florent Kermarrec
0b6d38abe9
build/xilinx/programmer: add multi jtag devices support to VivadoProgrammer
2017-07-19 14:54:19 +02:00
Florent Kermarrec
d05d170b75
soc/integration/cpu_interface: do not generate constant access functions when with_access_functions is set to False
2017-07-19 12:18:35 +02:00
Florent Kermarrec
20c859d45c
soc/tools/remote/etherbone: speed optimization (~20/30%)
2017-07-17 00:25:58 +02:00
Florent Kermarrec
bdea4152e3
soc/core/uart: add UartStub to enable fast simulation with cpu
2017-07-06 19:19:10 +02:00
enjoy-digital
734ecead36
Merge pull request #25 from q3k/master
...
Add Versa ECP5-5G Platform.
2017-07-05 16:22:50 +02:00
Sergiusz Bazanski
1885e50d54
Add Versa ECP5-5G Platform.
2017-07-05 15:01:07 +01:00
Florent Kermarrec
0894f9e6f7
targets: cleanup arty/nexys_video/kc705 and use better ddr3 timings on arty/nexys_video (found using the new bitslip/delay finder tool)
2017-07-04 09:01:29 +02:00
Florent Kermarrec
fe535db5ab
merge migen ee0e709 changes
2017-07-04 08:15:40 +02:00
Florent Kermarrec
c6f6d7b491
soc/interconnect/wishbonebridge: reset_less optimizations
2017-06-30 19:41:14 +02:00
Florent Kermarrec
7fcdd94cd4
soc/interconnect/stream_packet: reset_less optimizations
2017-06-30 19:40:54 +02:00
Florent Kermarrec
227b14c3f3
soc/interconnect/stream: improve reset_less support for streams
2017-06-30 19:40:17 +02:00
Florent Kermarrec
f5a971a8d8
soc/interconnect/stream: use reset_less attr of signal for payload and param
2017-06-28 23:10:45 +02:00
Florent Kermarrec
bd876d4cd6
merge migen 9a6fdea3 changes
2017-06-28 22:47:13 +02:00
Florent Kermarrec
4d664730fe
soc/software/libbase: fix get_ident
2017-06-28 18:10:56 +02:00
Florent Kermarrec
e61d9eabc6
board/targets/sim: add identifier
2017-06-28 18:08:37 +02:00