Florent Kermarrec
8d999081e3
boards/targets: update SDRAM to use new GENSDRPHY and new ECP5PLL phase support.
2020-03-24 20:04:18 +01:00
Florent Kermarrec
3eb08c7dd8
boards/platforms: remove versa_ecp3 (ECP3 no longer supported).
2020-03-24 20:02:57 +01:00
Florent Kermarrec
eb64169521
build/lattice/diamond: remove ECP3 support. (ECP3 is not used and no longer interesting now that ECP5 has an open-source toolchain).
2020-03-24 19:36:57 +01:00
Florent Kermarrec
bba5f1828b
cores/clock/ECP5PLL: add phase support.
2020-03-24 19:09:05 +01:00
Florent Kermarrec
0123ccc893
build/lattice/common: change LatticeECPXDDROutputImpl from ECP3 to ECP5.
2020-03-24 19:08:38 +01:00
bunnie
5a402264d0
Fix off-by-one error on almost full condition for prefetch
...
This causes a DRC error on the Xilinx tools when the prefetch
lines setting is 1. Don't know why this wasn't caught earlier,
but it just popped up in CI.
2020-03-24 08:04:35 +01:00
Feliks
ebdc38fc91
flush rx buffer when bad crc and fix frame payload length
2020-03-23 23:04:36 -04:00
Florent Kermarrec
d62ef38c4b
soc/doc/csr: allow CSRField.reset to be a Migen Constant.
2020-03-23 18:47:41 +01:00
Florent Kermarrec
4adac90d88
cpu/vexriscv/mem_map_linux: move main_ram to allow up to 1GB.
2020-03-23 15:35:33 +01:00
Florent Kermarrec
63ab2ba40c
software/bios/boot/linux: move emulator.bin to main_ram and allow defining custom ram offsets.
2020-03-23 15:06:32 +01:00
Florent Kermarrec
d998475498
targets: remove Etherbone imports.
2020-03-21 21:39:34 +01:00
Florent Kermarrec
3b04efbcae
targets: switch to add_etherbone method.
2020-03-21 19:55:00 +01:00
Florent Kermarrec
5ad7a3b7df
integration/soc: add add_etherbone method.
2020-03-21 19:54:36 +01:00
Florent Kermarrec
d6b0819e4c
integration/soc/add_ethernet: add name parameter (defaults to ethmac).
2020-03-21 19:36:31 +01:00
Florent Kermarrec
930679efd7
targets: always use sys_clk_freq on SDRAM modules.
2020-03-21 19:36:06 +01:00
Florent Kermarrec
ae6ef923af
targets: fix typos in previous changes.
2020-03-21 18:26:58 +01:00
enjoy-digital
c547b2cc29
Merge pull request #436 from rob-ng15/master
...
Reclock spi sdcard access after initialisation
2020-03-21 09:26:25 +01:00
enjoy-digital
011773af8d
Merge pull request #435 from enjoy-digital/spi_master_clk_divider
...
soc/core/spi: add Clk Divider CSR (defaults to sys_clk_freq/spi_clk_f…
2020-03-21 09:25:37 +01:00
rob-ng15
2bf31a31da
Reclock spi sdcard access after initialisation
...
Depends upon https://github.com/enjoy-digital/litex/pull/435
After initialising the card, reclock the card, aiming for ~16MHz (divider is rounded up, as slower speed is safer), but a maximum of half of the processor speed.
Tested with the card being clocked to 12.5MHz on de10nano
2020-03-21 07:37:21 +00:00
Florent Kermarrec
f03d862c06
targets: switch to add_ethernet method instead of EthernetSoC.
2020-03-20 23:46:15 +01:00
Florent Kermarrec
4e9a8ffe9c
targets: switch to SoCCore/add_sdram instead of SoCSDRAM.
2020-03-20 22:02:36 +01:00
Florent Kermarrec
61c9e54a90
soc/core/spi: add Clk Divider CSR (defaults to sys_clk_freq/spi_clk_freq).
2020-03-20 19:49:42 +01:00
Florent Kermarrec
dd7718b4fe
targets/arty: use new ISERDESE2 MEMORY mode.
2020-03-20 18:58:31 +01:00
Florent Kermarrec
fca52d110d
Merge branch 'master' of http://github.com/enjoy-digital/litex
2020-03-20 18:54:51 +01:00
enjoy-digital
0f35664839
Merge pull request #434 from rob-ng15/master
...
Use <stdint.h> to provide structure sizes
2020-03-20 18:05:21 +01:00
rob-ng15
f3c233776e
Use <stdint.h> to provide structure sizes
2020-03-20 11:35:05 +00:00
rob-ng15
c2ebbcbf6c
Use <stdint.h> for structure sizes
2020-03-20 11:34:24 +00:00
Florent Kermarrec
ccf7363932
integration/soc: add add_spi_flash method to add SPI Flash support to the SoC.
2020-03-20 10:24:31 +01:00
Florent Kermarrec
ec3e068669
targets/nexys4ddr: use LiteXSoC's add_spi_sdcard method.
2020-03-20 09:58:09 +01:00
Florent Kermarrec
d276036f24
integration/soc: add add_spi_sdcard method to add SPI mode SDCard support to the SoC.
2020-03-20 09:57:37 +01:00
enjoy-digital
6044570928
Merge pull request #433 from gsomlo/gls-rocket-spisdcard
...
Support SPI-mode SDCard booting on Litex+Rocket (64bit) configuration
2020-03-20 09:41:56 +01:00
Gabriel Somlo
b960d7c574
targets/nexys4ddr: add '--with-spi-sdcard' build option
2020-03-19 21:51:44 -04:00
Gabriel Somlo
7a7b8905b7
platforms/nexys4ddr: add spisdcard pins.
...
Synchronize with litex-boards commit #57bcadb.
2020-03-19 21:51:44 -04:00
Gabriel Somlo
af4de03fad
targets/nexys4ddr: make sdcard reset conditional
2020-03-19 21:51:44 -04:00
Gabriel Somlo
a33916bc6b
software/libbase/spisdcard: fix 4-byte FAT fields on 64-bit CPUs
...
On 64-bit architectures (e.g., Rocket), 'unsigned long' means
eight (not four) bytes. Use 'unsigned int' wherever a FAT data
structure requires a four-byte field!
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 21:51:44 -04:00
Sean Cross
fbadfa1764
Merge pull request #432 from esden/csr-doc-fix-int
...
Don't let python convert lane number to float.
2020-03-20 09:20:02 +08:00
Piotr Esden-Tempski
279886721b
Don't let python convert lane number to float.
...
While at it also:
* Don't multilane for reg >= 8 bit width.
* Only check if we should switch to multilane after finding min field width.
2020-03-19 18:12:41 -07:00
Gabriel Somlo
1f90abea8e
bios: make SPI SDCard boot configs other than linux-on-litex-vexriscv
...
When NOT on linux-on-litex-vexriscv, we load 'boot.bin' to MAIN_RAM_BASE,
and jump to it.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 19:37:47 -04:00
Gabriel Somlo
c2938dc973
bios/boot.c: cosmetic: re-indent spisdcardboot() for consistency
2020-03-19 19:37:47 -04:00
enjoy-digital
dd07a0ad2f
Merge pull request #431 from antmicro/hybrid-mac
...
litex_sim: add support for hybrid mac
2020-03-19 22:10:33 +01:00
Florent Kermarrec
37f25ed37a
software/libbase/bios: rename spi.c/h to spisdcard.h, also rename functions.
2020-03-19 11:02:15 +01:00
Florent Kermarrec
939256340f
software/bios/main: revert USDDRPHY_DEBUG (merge issue with SPI SD CARD PR).
2020-03-19 10:47:28 +01:00
enjoy-digital
8fe9e72f7b
Merge pull request #429 from rob-ng15/master
...
SPI hardware bitbanging from SD CARD
2020-03-19 10:41:09 +01:00
Piotr Binkowski
96a265a408
litex_sim: add support for hybrid mac
2020-03-19 10:04:08 +01:00
enjoy-digital
9e1cd84296
Merge pull request #430 from gsomlo/gls-sdclk-stub
...
bios/sdcard: provide sdclk_set_clk() stub for clocker-less targets
2020-03-19 09:05:02 +01:00
Gabriel Somlo
b2103f4ad8
bios/sdcard: provide sdclk_set_clk() stub for clocker-less targets
...
Targets which lack an adjustable clocker will not expose the required
registers. Provide a stub sdclk_set_clk() routine for those situations.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-18 15:11:23 -04:00
Florent Kermarrec
e865162904
platforms/kcu105: fix pcie tx0 p/n swap.
2020-03-18 19:05:54 +01:00
rob-ng15
27720409ce
SPI hardware bitbanging from SD CARD
2020-03-17 09:51:11 +00:00
rob-ng15
d45dda731a
SPI hardware bitbanging from SD CARD
2020-03-17 09:50:45 +00:00
rob-ng15
50b6db6a6b
SPI hardware bitbanging from SD CARD
2020-03-17 09:50:16 +00:00