In liblitesdcard/sdcard.c, replace s/sector/block/ as the 512 byte sized
unit of data transfer to/from the sdcard.
In bios/cmds/cmd_litesdcard.c, do NOT multiply block numbers by 512,
allowing any "block" (a.k.a. "sector") on the sdcard to be addressed for
testing.
Before this patch, user-input "block numbers" were multiplied by 512 and
passed into sdcard_[read|write]() as "sector numbers", with the sdcard
logic internally treating these as 512-byte sized addressable units on
the card. This resulted in only every 512'th 512-byte sized "sector" being
accessible from the bios command line.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
add_csr() is defined by SoCCore, so won't work for any instances of
LiteXSoC that aren't also SoCCores. Also, use use_loc_if_exists=True
so SoCCore.csr_map can be used without double allocation errors.
Allows speeding-up consecutives accesses on the same address. This is currently
used by LiteDRAM bench to speed-up the logging of the BIOS over the crossover UART,
but could be useful for other purposes.
In some cases, we want to run UARTBone in a specific clock domain. For example
in LiteDRAM bench, UARTBone is controlling the SoC and the main PLL generating
the sys_clk is reconfigured dynamically, so we want to run UARTBone in a specific
(and fixed) clock domain.
With nmigen/nmigen#a7b8ced, cli.py no longer defaults to generating
verilog code, so -t/--type has to be specified explicitly.
$ pytest test/test_targets.py -k test_variants_minerva
[...]
cli.py: error: specify file type explicitly with -t
DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3, and in 3.9 it will stop working
there is an async reset signal going to a FIFO
that can't be false_path'd because its timing is important
to making sure that the burst FIFO is reset to zero when
a miss happens in the burst cache. Unfortunately as designs
get full, the routability of this signal becomes difficult
and drives up the compile time and reduces quality of results.
There is enough time in the design to insert a single pipe stage
to alleviate the timing somewhat. This commit adds that register.
Instead of reading the 128 byte sdcard response after each operation,
read it only during debugging and/or when it's necessary (to retrieve
the relative card address, rca).
We no longer need a global sdcard_response array, and refactor the
various retrieval and reporting functions to contain a local buffer
for that purpose, only if/when necessary.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Factor out common portion of command functions. Also use appropriate
unsigned int width (e.g., uint16_t) for arguments.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Gabriel Somlo
Florent Kermarrec
Xiretza
Greg Davill
Piense
Mateusz Holenko
bunnie