50e857e99c
sdram/phy/s6ddrphy: add S6QuarterRateDDRPHY to run DDR3 at higher frequencies.
...
Built on top of S6HalfRateDDRPHY, exposes a 4 phases DFI interface to the controller with a 2x slower clock.
Validated on the Numato Lab opsis board (50MHz sys_clk/ DDR400), should also work on the Novena laptop (same DDR3 module).
2015-08-22 12:17:48 +02:00
8bb30a8620
liteeth/phy: fix autodetect (clk_freq not necessary passed in kwargs)
2015-08-22 12:08:49 +02:00
158fbe49ac
sdram/phy/s6ddrphy: rename S6DDRPHY to S6HalfRateDDRPHY and use ORed wrdata_en/rddata_en (the controller already manages that)
2015-08-22 11:47:26 +02:00
b8f3fd53f1
README: small update
2015-08-22 11:39:54 +02:00
4acab79987
sdram/module: cleanup indent
2015-08-20 22:15:06 +02:00
63538a7d04
litecores: add -Ob option to make.py (allow to build with yosys for example)
2015-08-19 01:17:37 +02:00
3d3cd128d8
liteeth/phy: only use clk_freq for LiteEthPHYGMIIMII in autodetect
2015-08-19 01:17:35 +02:00
5253b0c06e
migen/actorlib/packet: fix source.error in Depacketizer
2015-08-19 01:12:07 +02:00
9210df9e9f
mibuild/xilinx/ise: update synthesis with yosis
2015-08-19 01:12:05 +02:00
6683485841
tools/flterm: replace int(a, 16) with int(a, 0) for --kernel-adr
2015-08-18 15:47:09 +02:00
a9d40e790c
tools/flterm.py: cleanup kernel-adr argument parsing
2015-08-13 13:25:02 +02:00
d8fd4fe725
Use shutil rather then rm -rf command.
2015-08-13 14:54:58 +08:00
eeda704462
Use shell for globbing in clean.
2015-08-13 14:54:58 +08:00
d00e774986
All commands run should be checked.
2015-08-13 14:54:58 +08:00
5a3f4e4179
tools/flterm.py: some cleanup and fix last frame data that was not transmitted
2015-08-12 11:41:08 +02:00
abf9a58a3a
unwinder: update.
2015-08-10 16:23:02 +03:00
646667213e
migen/flow/actor: fix sop/eop validation in PipelinedActor (stb can be inactive when pipe_ce is active)
2015-08-09 19:54:38 +02:00
d88904b3d7
libdyld: add const qualifiers.
2015-08-08 15:21:09 +03:00
cf3a9e04b8
libbase: add const qualifiers.
2015-08-08 12:16:27 +03:00
1b34f48660
libdyld: all ELF relocations may refer to the current object.
2015-08-07 11:05:28 +03:00
3cf46671e9
liteeth/phy: rename rgmii to s6rgmii since specific to Spartan6
...
Also remove autodetection support for RGMII. For it to work we would need to pass the device we are building for.
2015-08-05 10:33:08 +02:00
4b8d9b67f3
liteeth: add rgmii phy
2015-08-05 00:50:55 +02:00
9c902bcd86
Port fpgalink_programmer to use newer fl library.
...
* See change in 2074e51a33
2015-08-04 21:42:29 +08:00
c03ef526eb
sdram/phy/s6ddrphy: add DDR3 support
2015-08-04 12:29:42 +02:00
52fba05e26
sdram/phy/initsequence: add burst chop 4 (BC4) for DDR3
...
This is needed for half rate controllers with burst length of 4.
For best efficiency quarter rate controllers should be used.
2015-08-04 11:19:20 +02:00
64f1368938
libunwind: build with -DNDEBUG.
2015-08-02 15:42:02 +03:00
b1445ae743
dyld: style
2015-08-02 12:35:48 +08:00
6a1b0b342c
libdyld: handle existing but undefined symbols during lookup.
2015-08-02 05:56:11 +03:00
36e03ec8a8
libdyld: R_*_RELATIVE never specify a symbol.
2015-08-02 05:29:23 +03:00
10773db08d
libdyld: handle unaligned relocations.
2015-08-01 20:26:27 +03:00
8a0beb4cfb
unwinder: update.
2015-08-01 20:16:59 +03:00
344e1bc6de
libdyld: add support for R_OR1K_{NONE,32,GLOB_DAT}.
2015-08-01 20:16:10 +03:00
d625c43591
libbase: also pass exception PC and EA to exception handler.
2015-08-01 20:15:42 +03:00
13a50a93d9
libbase: downstream users should provide fprintf.
2015-08-01 20:14:09 +03:00
3f7f0a3151
libdyld: fix dyld_lookup algorithm.
2015-08-01 17:21:31 +03:00
d43e470e3c
libdyld: fix DT_HASH address calculation.
2015-08-01 15:49:33 +03:00
04934ff3f1
software/common.mak: use PYTHON env var
2015-07-31 18:31:04 +08:00
df2306ab88
try to use the new anaconda-client
2015-07-31 13:46:28 +08:00
eb643f1132
Export _cache_init from crt0.S.
2015-07-31 02:40:52 +03:00
90314052fa
Implement a dynamic linker.
2015-07-31 02:38:38 +03:00
66839b512a
Update libunwind submodule.
2015-07-31 02:38:38 +03:00
106e4c6962
bios/sdram: fix error_cnt computation in memtest
2015-07-30 23:59:04 +02:00
94cb3cbcf6
libbase: define intptr_t.
2015-07-30 10:55:12 +03:00
4b6bd43d8e
Enable ror, ffl1 and addc for OR1K.
2015-07-30 10:55:01 +03:00
8db098dd8f
Make sure the BIOS file ends on an aligned boundary.
...
If it does not, the address to which mkmscimg.py writes the CRC
and the address from which it is read could differ.
2015-07-29 12:30:57 +03:00
a4e14f1058
Don't build base libraries and BIOS with -fPIC after all.
2015-07-29 12:09:05 +03:00
abbb76ce84
ise: do not use LCK_cycle:6 by default
2015-07-29 11:09:42 +08:00
b7aff65ca9
mor1kx: enable ADDC, CMOV and FFL1 instructions
2015-07-29 00:08:21 +08:00
f2eff4d10e
soc: increase default BIOS size
2015-07-28 22:36:42 +08:00
5e6178598c
Merge branch 'master' of https://github.com/m-labs/misoc
2015-07-28 11:59:48 +02:00
Florent Kermarrec
Tim 'mithro' Ansell
whitequark
Ryan Verner
Sebastien Bourdeauducq