Florent Kermarrec
|
0b1a2e1022
|
liteeth: do MII/GMII detection in gateware for gmii_mii phy
|
2015-04-26 18:08:07 +02:00 |
|
Florent Kermarrec
|
07b7c2a13f
|
liteeth/phy/gmii: add default value for pads_register
|
2015-04-26 14:54:54 +02:00 |
|
Florent Kermarrec
|
ae71bf2830
|
liteeth: fix and improve 10/100/1000Mbps speed auto detection
|
2015-04-26 14:54:53 +02:00 |
|
Florent Kermarrec
|
2bd38f44a3
|
liteeth: more pep8 (when convenient), should be almost OK
|
2015-04-13 13:02:04 +02:00 |
|
Florent Kermarrec
|
154d3d3b04
|
liteeth: pep8 (E265)
|
2015-04-13 11:27:01 +02:00 |
|
Florent Kermarrec
|
45dc4920ec
|
liteeth: pep8 (E261, E271)
|
2015-04-13 11:07:50 +02:00 |
|
Florent Kermarrec
|
a84f12618b
|
liteeth: pep8 (E225)
|
2015-04-13 10:56:18 +02:00 |
|
Florent Kermarrec
|
726fd3ab42
|
liteeth: pep8 (E203)
|
2015-04-13 10:39:46 +02:00 |
|
Florent Kermarrec
|
5720638d85
|
liteeth: pep8 (E302)
|
2015-04-13 10:20:02 +02:00 |
|
Florent Kermarrec
|
cd43eaffc2
|
liteeth: pep8 (replace tabs with spaces)
|
2015-04-13 09:53:43 +02:00 |
|
Florent Kermarrec
|
afa9b889ae
|
liteeth/phy/gmii: fix clock generation for mii mode (clock_pads.tx is an input)
|
2015-04-12 22:15:45 +02:00 |
|
Florent Kermarrec
|
8e639160e3
|
liteeth/phy/gmii_mii: add pads registers in RX
|
2015-04-12 20:43:01 +02:00 |
|
Florent Kermarrec
|
0c27708b0a
|
liteeth/phy/gmii_mii: avoid doubling pads register on TX
|
2015-04-12 20:42:12 +02:00 |
|
Florent Kermarrec
|
bc81d9d639
|
liteeth/phy/__init__.py: add more comments
|
2015-04-12 18:56:46 +02:00 |
|
Florent Kermarrec
|
515398634f
|
liteeth/phy/gmii_mii: add clock counter and use it in bios to select mode
|
2015-04-12 18:42:52 +02:00 |
|
Florent Kermarrec
|
857bee8a00
|
liteeth/phy: add GMII/MII phy
for now swicth is manual, we will need a clk counter to allow software or logic to automatically switch between GMII and MII
|
2015-04-12 17:25:55 +02:00 |
|
Florent Kermarrec
|
cfac3d9f5c
|
liteeth/phy/mii: simplify LiteEthPHYMIIRX using Converter
|
2015-04-12 16:03:21 +02:00 |
|
Florent Kermarrec
|
ddae41f2e4
|
liteeth/phy/mii: simplify LiteEthPHYMIITX using Converter
|
2015-04-12 15:34:56 +02:00 |
|
Florent Kermarrec
|
8c722db54e
|
liteeth/phy/mii: assign tx_er only if exists (as it's done on GMII)
|
2015-04-12 14:43:35 +02:00 |
|
Florent Kermarrec
|
4329e3e1b9
|
liteeth/phy/mii: allow use of MII phy on GMII/MII chips that do not have phy clock provided by the FPGA (tested on KC705)
|
2015-04-12 14:28:17 +02:00 |
|
Florent Kermarrec
|
2327710387
|
liteeth/phy/gmii : set tx_er to 0 only if it exits
|
2015-03-17 12:24:06 +01:00 |
|
Florent Kermarrec
|
faf185d58d
|
liteeth: make gmii phy generic
|
2015-03-16 23:04:37 +01:00 |
|
Florent Kermarrec
|
c3c7f627d9
|
liteeth/phy: typo (thanks sb)
|
2015-03-12 21:54:10 +01:00 |
|
Florent Kermarrec
|
767d45727a
|
uart/liteeth: only import the phy we are going to use (UARTPHYSim cannot be imported on Windows since based on pty).
|
2015-03-12 16:57:38 +01:00 |
|
Florent Kermarrec
|
b10836a8eb
|
liteeth/phy/sim: create ethernet tap in __init__ and destroy it in do_exit
|
2015-03-09 17:21:29 +01:00 |
|
Florent Kermarrec
|
95fa753149
|
liteeth: add phy autodetect function (phy can still be instanciated directly)
|
2015-03-06 10:10:34 +01:00 |
|
Florent Kermarrec
|
2c51adcd68
|
misoclib: better organization (create cores categories: cpu, mem, com, ...)
|
2015-02-28 09:40:44 +01:00 |