c05d0f1966
liblitesdcard/spisdcard: streamline initialization (cosmetic).
2020-06-15 15:24:40 -04:00
27fcddb209
soc_core: Increase sram size default to 8k.
2020-06-15 21:18:26 +02:00
9c68d71503
bios/linker: Place .data in sram with initial copy in rom.
2020-06-15 16:24:53 +02:00
336896603f
bios/linker: Place .got in .rodata.
2020-06-15 16:04:02 +02:00
7d5ca3f926
bios/boot: addresses should use 'unsigned long'
2020-06-13 21:31:49 -04:00
68d3804cdb
CHANGES: update.
2020-06-11 19:25:16 +02:00
5ddf350c2d
software/spisdcard: reduce SPISDCARD_CLK_FREQ to 16MHz.
...
25MHz does not seem to work on all boards/configurations, needs to be investigated.
2020-06-11 19:18:32 +02:00
d6f92d1ffd
build: add DFUProg.
2020-06-11 14:45:50 +02:00
653edd17ca
bios/boot: simplify flashboot (remove specific linux boot).
...
Storage in SPI Flash is generally limited and booting Linux from it is no longer very useful
since boot from SDCard is now supported. This is in the continuity of the SDCard/Ethernet
simplications to have an easier and more flexible boot scheme.
2020-06-11 13:38:38 +02:00
7b65a93ca5
bios/boot: add separators, update copyrights.
2020-06-11 13:19:37 +02:00
f4abdd3f2c
bios/boot: make Ethernet boot mode flexible (now also using boot.json similarly to SDCard boot).
...
Example of boot.json:
{
"Image": "0x40000000",
"rootfs.cpio": "0x40800000",
"rv32.dtb": "0x41000000",
"emulator.bin": "0x41100000"
}
2020-06-11 13:12:58 +02:00
c2ae22eeb6
bios/boot: make SDCard boot more flexible using a boot.json file on the SDCard.
...
The BIOS now reads the boot.json file to know which files need to be copied to RAM and where.
It will fallback to boot.bin is no boot.json is found and boot will fail if neither is found.
Example of boot.json file used to boot Linux-On-LiteX-Vexriscv:
{
"Image": "0x40000000",
"rootfs.cpio": "0x40800000",
"rv32.dtb": "0x41000000",
"emulator.bin": "0x41100000"
}
2020-06-11 11:26:10 +02:00
d918c0bb99
software/bios/boot/sdcardboot: let FatFs do the SDCard initialization with disk_initialize.
2020-06-11 08:33:56 +02:00
5197600812
software/bios/boot: add sdcardboot support for VexRiscv SMP.
2020-06-10 17:39:09 +02:00
72026d44f7
software/bios/main: clarify address space with @ instead of -.
2020-06-10 15:19:44 +02:00
a01d08e5b5
litex_setup.py: update microwatt.
2020-06-10 15:03:23 +02:00
a086237a07
Merge pull request #564 from shenki/microwatt-updates
...
Microwatt updates
2020-06-10 14:53:09 +02:00
ace81c83ee
Merge pull request #562 from gsomlo/gls-crlf
...
liblitesdcard: maintain unix newline convention across all source files
2020-06-10 14:40:28 +02:00
08bef5fc4c
software/liblitesdcard/ffconf: enable FF_FS_MINIMIZE and FF_FS_TINY.
2020-06-10 11:46:59 +02:00
75225e5e33
software/bios/boot: move f_mount to copy_image_from_sdcard_to_ram and force mount.
2020-06-10 11:46:18 +02:00
59a048b666
software/libliteeth/tftp: switch to progress bar.
2020-06-10 10:00:05 +02:00
f7e06a7e3f
bios/boot/copy_image_from_flash_to_ram: add missing init_progression_bar.
2020-06-10 09:59:38 +02:00
df9146fb78
soc/spisdcard: use 32-bit SPIMaster and do 32-bit xfers in spisdcardreceive_block to optimize speed.
2020-06-10 09:50:30 +02:00
d45cfc1e15
software/libbase/progress: avoid \t in progress bar, reduce HASHES_PER_LINE.
2020-06-10 09:16:06 +02:00
5beba178f2
software/libsdcard/spisdcard: add and use busy_wait_us to optimize speed.
2020-06-10 09:15:12 +02:00
dae15511a4
bios/boot/copy_image_from_sdcard_to_ram: use chunks of 32KB to increase speed.
2020-06-10 08:21:54 +02:00
d294e0f1de
bios/boot: add progress bar to copy_image_from_flash_to_ram, use uint32_t in flash/sdcard functions.
2020-06-10 08:12:12 +02:00
99f40fecaa
libase/progress: move __div64_32, do_div to div64.h/c as it was in Barebox.
2020-06-10 07:47:21 +02:00
96fc96eccd
software/liblitesdcard: remove read_block prototype, minor cleanup.
2020-06-10 07:40:08 +02:00
748dcc1c26
microwatt: Add mmu.vhdl
2020-06-10 12:30:52 +09:30
b57fc8702a
microwatt: Update IRQ signal in wrapper
2020-06-10 12:30:52 +09:30
68d2aa45fa
microwatt: Add icache flush
2020-06-10 12:30:49 +09:30
e6909e2978
microwatt: Implement boot helper
2020-06-10 11:23:22 +09:30
5575a921d0
liblitesdcard: maintain unix newline convention across all source files
2020-06-09 14:09:35 -04:00
fe9b42facf
bios/boot: use progress bar in copy_image_from_sdcard_to_ram.
2020-06-09 20:00:32 +02:00
21b9239dc0
libbase: add progress bar (from Barebox).
2020-06-09 20:00:05 +02:00
32ebbc7761
software/liblitesdcard: add retries when setting card to Idle.
2020-06-09 19:59:38 +02:00
04d0ba6187
software/liblitesdcard/sdcard: add FatFs disk functions.
2020-06-09 17:58:43 +02:00
e27ed657e9
software/liblitesdcard/spisdcard: rename #defines and allow external definition.
2020-06-09 13:50:28 +02:00
a9e8860e49
software/liblitesdcard: create fat directory for FatFs files.
2020-06-09 13:44:26 +02:00
f1aba7e45c
sofware/liblitesdcard: enable Long Filename (LFN).
2020-06-09 13:35:14 +02:00
fb282d1a72
software/libsdcard: rewrite/simplify SPISDCard/FatFs support and only keep SDCard ver2.00+ compatibility.
2020-06-09 12:50:56 +02:00
20ff24622a
Merge pull request #559 from gsomlo/gls-fix-crlf
...
liblitesdcard: convert all sources to unix style newlines (cosmetic)
2020-06-06 22:06:46 +02:00
78e3f25157
liblitesdcard: convert all sources to unix style newlines (cosmetic)
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-06-06 13:24:29 -04:00
c1806eba11
software/liblitesdcard: remove unsused functions with FF_FS_READONLY.
2020-06-05 23:25:54 +02:00
f9b43c81cc
software/liblitesdcard: switch to FatFs for sdcardboot.
2020-06-05 21:20:19 +02:00
f972c8e45e
software/liblitesdcard: base it on FatFs generic example code + LiteX's SPIMaster specific functions.
2020-06-05 16:27:38 +02:00
5b908983a2
software/liblitesdcard: add FatFs files.
...
To avoid maintaining our own code and support all Fat filesystems, let's just use FatFs library.
2020-06-05 16:26:58 +02:00
7d141258be
software/liblitesdcard/spisdcard: simplify/rewrite for consistency with the others parts of the project.
...
- Improve code readability, remove un-needed or duplicate comments.
- Only use a spi_xfer function for both write/read.
- Set the SDCard to low clk freq before init and increase it when initialized.
2020-06-05 12:46:23 +02:00
860ac1e212
software/liblitesdcard: add copyrights to spisdcard/fat16.
2020-06-04 12:14:54 +02:00
Gabriel Somlo
Vegard Storheil Eriksen
Florent Kermarrec
Joel Stanley