picorv32/dhrystone/testbench_nola.v

// A version of the dhrystone test bench that isn't using the look-ahead interface

`timescale 1 ns / 1 ps

module testbench;
	reg clk = 1;
	reg resetn = 0;
	wire trap;

	always #5 clk = ~clk;

	initial begin
		repeat (100) @(posedge clk);
		resetn <= 1;
	end

	wire mem_valid;
	wire mem_instr;
	reg  mem_ready;
	wire [31:0] mem_addr;
	wire [31:0] mem_wdata;
	wire [3:0]  mem_wstrb;
	reg  [31:0] mem_rdata;

	picorv32 #(
		.BARREL_SHIFTER(1),
		.ENABLE_FAST_MUL(1),
		.ENABLE_DIV(1),
		.PROGADDR_RESET('h10000),
		.STACKADDR('h10000)
	) uut (
		.clk         (clk        ),
		.resetn      (resetn     ),
		.trap        (trap       ),
		.mem_valid   (mem_valid  ),
		.mem_instr   (mem_instr  ),
		.mem_ready   (mem_ready  ),
		.mem_addr    (mem_addr   ),
		.mem_wdata   (mem_wdata  ),
		.mem_wstrb   (mem_wstrb  ),
		.mem_rdata   (mem_rdata  )
	);

	reg [7:0] memory [0:256*1024-1];
	initial $readmemh("dhry.hex", memory);

	always @(posedge clk) begin
		mem_ready <= 1'b0;

		mem_rdata[ 7: 0] <= 'bx;
		mem_rdata[15: 8] <= 'bx;
		mem_rdata[23:16] <= 'bx;
		mem_rdata[31:24] <= 'bx;

		if (mem_valid & !mem_ready) begin
			if (|mem_wstrb) begin
				mem_ready <= 1'b1;

				case (mem_addr)
					32'h1000_0000: begin
						$write("%c", mem_wdata);
						$fflush();
					end
					default: begin
						if (mem_wstrb[0]) memory[mem_addr + 0] <= mem_wdata[ 7: 0];
						if (mem_wstrb[1]) memory[mem_addr + 1] <= mem_wdata[15: 8];
						if (mem_wstrb[2]) memory[mem_addr + 2] <= mem_wdata[23:16];
						if (mem_wstrb[3]) memory[mem_addr + 3] <= mem_wdata[31:24];
					end
				endcase
			end
			else begin
				mem_ready <= 1'b1;

				mem_rdata[ 7: 0] <= memory[mem_addr + 0];
				mem_rdata[15: 8] <= memory[mem_addr + 1];
				mem_rdata[23:16] <= memory[mem_addr + 2];
				mem_rdata[31:24] <= memory[mem_addr + 3];
			end
		end
	end

	initial begin
		$dumpfile("testbench_nola.vcd");
		$dumpvars(0, testbench);
	end

	always @(posedge clk) begin
		if (resetn && trap) begin
			repeat (10) @(posedge clk);
			$display("TRAP");
			$finish;
		end
	end
endmodule