2989963b9c
phy: move regex pattern for parsing SimLogger logs to SimLogger class
2021-10-26 12:22:30 +02:00
aad7cce8c5
phy/lpddr5/simphy: use the same serialization scheme in S7 PHY to serve as reference
2021-10-26 12:22:30 +02:00
6b2a1bc47c
phy/lpddr5/s7phy: apply command serialization fixes
2021-10-26 12:22:30 +02:00
abc77f367c
lpddr5: wck sync: fix syncing and adjusted unit tests
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-10-26 12:22:30 +02:00
c4273146c1
lpddr5: wck sync: adapt tests as now wck sync is required
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-10-26 12:22:30 +02:00
c9954744df
lpddr5: wck sync at every transaction
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-10-26 12:22:30 +02:00
95be0be69d
phy/lpddr5/sim: fix incorrect write latency in DRAM simulator
2021-10-26 12:22:30 +02:00
8c10f1405b
phy/lpddr5: delay WCK sync FSM transition by 1 cycle
...
With fixed serialization logic WCK sync can be now started later
which avoids the need for special logic when tWCKENL=0.
2021-10-26 12:22:30 +02:00
32a56ffe28
phy/lpddr5: fix command serialization
2021-10-26 12:22:30 +02:00
05c0720ae2
lpddr5: add MR28 init default config
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-10-26 12:22:30 +02:00
d98b5703fc
lpddr5: commands: handle ZQC MPC command
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-10-26 12:22:30 +02:00
d496bd22e5
init: add lpddr5 write leveling settings
2021-10-26 12:22:30 +02:00
2c2b73442a
phy/lpddr5: add PHY for series 7
2021-10-26 12:22:30 +02:00
e4e2aa49b8
phy/lpddr4: extract io helpers to a separate class
2021-10-26 12:22:30 +02:00
a4fb1a633a
phy/lpddr5: do not use dataclasses for Python 3.6 compatibility
2021-10-26 12:22:30 +02:00
9795d6902c
phy/lpddr5/sim: partially disable DFITimingsChecker when --disable-delay is on
...
With --disable-delay the software won't insert delays in between
commands during memory training which results in DFITimingsChecker
reporting timing violations. With this change we disable
DFITimingsChecker until software completes memory initialization.
2021-10-26 12:22:30 +02:00
247641a353
phy/lpddr5/sim: don't check timings when --disable-delay is used
2021-10-26 12:22:30 +02:00
0009f6d2be
phy/lpddr5/sim: show timing progress when logging timing violation
2021-10-26 12:22:30 +02:00
9ef6e4b444
phy/lpddr5/sim: add DFITimingsChecker
2021-10-26 12:22:30 +02:00
91f14b2414
phy/lpddr5/sim: add option to wrap the PHY with DFIRateConverter
2021-10-26 12:22:30 +02:00
e329545ea6
phy/lpddr5/sim: make wr/rd timings correct for both CKR=4 and 2
2021-10-26 12:22:30 +02:00
2c8a06ed00
phy/lpddr5/sim: reset FSM to initial state when RESET_n is pulled low
2021-10-26 12:22:30 +02:00
59467f8ae6
phy/lpddr5: add a way to send actual NOP instead of DESELECT
2021-10-26 12:22:30 +02:00
9c49d80e6b
phy/lpddr5: add power-up initialization sequence
2021-10-26 12:22:30 +02:00
c795bafda7
phy/lpddr5/sim: add verification of initialization sequence
2021-10-26 12:22:30 +02:00
27da8c5c43
phy/lpddr5/sim: update mode register reset values
2021-10-26 12:22:30 +02:00
e39aec4b7e
phy/lpddr5/sim: fix command timeouts calculation
2021-10-26 12:22:30 +02:00
7f742c7fde
phy/lpddr5/sim: handle data masking during masked-write
2021-10-26 12:22:30 +02:00
26cbb700bc
phy/lpddr5/sim: update delay for read data, add basic CAS handler
2021-10-26 12:22:30 +02:00
4e974738d1
phy/lpddr5: fix column address encoding/decoding
2021-10-26 12:22:30 +02:00
a015b66e4f
phy/lpddr5: fix write latency
2021-10-26 12:22:30 +02:00
e906c82ea2
phy/lpddr5/sim: debug serialization in gtkwave savefile
2021-10-26 12:22:30 +02:00
bfb8aaf44c
phy/lpddr5/sim: clean up write burst handling and implement read bursts
2021-10-26 12:22:30 +02:00
b8616fdfac
phy/lpddr5/sim: make adding module loggers simpler
2021-10-26 12:22:30 +02:00
5544875e1d
phy/lpddr5/sim: fix SimLogger timestamps
...
Timestamps were completely wrong for WCK as it is disabled
until the first write command and has varying frequency.
Now we use another clock which is always on to calculate time.
2021-10-26 12:22:30 +02:00
592ed9cac4
phy/lpddr5/sim: add initial data commands handling
2021-10-26 12:22:30 +02:00
6366a02389
phy/sim_utils: fix log level NONE not working
2021-10-26 12:22:30 +02:00
914d018cf8
phy/sim_utils: support low wait times (0/1) in PulseTiming
2021-10-26 12:22:30 +02:00
f9a11ea5ce
phy/lpddr5: start implementing DRAM simulator
2021-10-26 12:22:30 +02:00
2671508a11
phy/lpddr5: add simulation SoC
2021-10-26 12:22:30 +02:00
261f3dcd63
phy/lpddr5: add simulation phy
2021-10-26 12:22:30 +02:00
7cdf0e11ca
phy/lpddr5: add unit tests
2021-10-26 12:22:30 +02:00
68a0ac7e88
phy/lpddr5: add command adaptaion and base phy implementation
2021-10-26 12:22:30 +02:00
2b0f806c96
ci: Increase similarities with LiteX CI.
2021-10-26 12:15:39 +02:00
f537b5dd52
phy/s7ddrphy: Fix DDR2 case.
2021-10-18 15:33:56 +02:00
3202bc6acd
Merge pull request #277 from antmicro/acom/s7phy_ddr4
...
phy: s7: add DDR4 memtype as well
2021-10-18 13:35:15 +02:00
1d5192f572
litedram_gen/fifo: Avoid unnecessary get_port().
2021-10-08 08:52:50 +02:00
e1defa2687
litedram_gen: Fix rate for 7-Series.
2021-10-07 16:22:40 +02:00
1c59e77302
litedram_gen/add_sdram: Remove origin: no longer required.
2021-10-07 16:20:23 +02:00
f0a2f40a86
litedram_gen: Compute rate based on type of PHY (DDR3 rate is 1:2 with ECP5DDRPHY).
2021-10-07 15:41:51 +02:00
Jędrzej Boczar
Alessandro Comodi
Piotr Binkowski
Florent Kermarrec