Florent Kermarrec
1f32dcf662
partner: rename orange_crab to orangecrab
2019-12-30 12:07:34 +01:00
Florent Kermarrec
8965b01347
partner/orange_crab: cleanup, make it similar to others targets and only keep BaseSoC
2019-12-30 11:54:53 +01:00
Greg Davill
e77afaaef0
partner: add OrangeCrab support ( https://github.com/gregdavill/OrangeCrab )
2019-12-30 11:54:45 +01:00
Florent Kermarrec
0a56d86b1a
partner/c10lprefkit: remove FAMILY platform_command (not needed)
2019-12-06 15:21:48 +01:00
Sean Cross
0da263fa75
platforms: fomu: add spiflash4x definition
...
Fomu Hacker supports dual spi, so add a "spiflash4x" definition.
The litex spi_flash module will run this flash in dual mode, because the
`dq` array is only two signals wide.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-24 21:56:57 +08:00
Sean Cross
2c82e02df9
fomu: pvt: swap miso and mosi
...
These pins were swapped in the definition, which made them not work so
well.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-22 18:57:26 +08:00
Sean Cross
92cfd629df
partners: fomu-evt: add "dbg" connector
...
This connector is for the six "debug" pins on the Raspberry Pi header.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-10-11 21:39:19 +08:00
Sean Cross
09a55d20c1
partners: fomu-evt: fix spiflash4x pin mapping
...
The D3 and D4 pins were swapped around, leading to interesting issues.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-10-11 21:38:50 +08:00
Sean Cross
c20c489d66
fomu-evt: add i2c pins
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-09-27 11:26:23 +08:00
Florent Kermarrec
e94c6c8f27
partner/netv2: switch to MVP (K4B2G1646F instead of MT41J128M16)
2019-09-12 09:52:13 +02:00
Florent Kermarrec
91feb59f49
Merge branch 'master' of http://github.com/litex-hub/litex-boards
2019-09-11 23:02:44 +02:00
Florent Kermarrec
ec97d01feb
platforms/netv2: add spiflashx4, hdmi in/out
2019-09-11 23:01:58 +02:00
Antti Lukats
91a1520655
add initial Trenz Cyclone 10 LP RefKit support with SDRAM/HyperRAM/Ethernet
2019-09-10 11:32:29 +02:00
Florent Kermarrec
b4eefa6c33
import: allow importing directly from litex_boards.platforms or litex_boards.targets
2019-09-03 15:30:20 +02:00
Florent Kermarrec
ec5540454b
partner: aller/nereid/tagus fix copyright (Rohit Singh as main author), do some cosmetic
2019-09-02 11:43:30 +02:00
Rohit Singh
346621b9fc
partner: add platforms and targets for aller, tagus and nereid boards
2019-09-01 03:02:04 -05:00
Florent Kermarrec
b84308cb58
list all platforms/targets in platforms.py, targets.py to ease import
2019-08-26 09:07:07 +02:00
Florent Kermarrec
0c1fa7f4a8
partner/platform/fomu: cleaup, make it similar to others platforms
2019-08-07 09:04:31 +02:00
Florent Kermarrec
9f3ed82097
keep up to date with LiteX
...
- use 1e9/freq for default_clk_period
- add default serial on tinyfpga_bx
- use S6PLL on minispartan6
- add SPIFlash pins on versa_ecp5
2019-08-07 08:47:08 +02:00
Florent Kermarrec
a88970a67f
move trellis board from community to partner
2019-07-12 19:23:21 +02:00
DurandA
adcc34b528
Turn litex_boards.partner into module
2019-07-01 19:36:34 +02:00
Florent Kermarrec
aeddb93729
add copyright header to all files, udpate.
2019-06-24 12:13:54 +02:00
Sean Cross
49ffc94e85
partner: platforms: fomu_evt: rename rgb_led_n -> rgb_led
...
The evt platform has a different naming scheme from the other two
versions of Fomu.
This harmonises the naming of the rgb_led pads between all of the Fomu
variants.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-06-19 19:21:15 -07:00
Florent Kermarrec
482a00aa76
fomu: move to right location
2019-06-12 19:50:46 +02:00
Florent Kermarrec
44d01edab9
dispatch platforms/targets by level of support
2019-06-10 18:59:49 +02:00