5a714167ed
muselab icesugar pro: add ethernet/etherbone support
...
- use P4 header for a waveshare ethernet phy module
- add --with-ethernet, --with-etherbone, --eth-ip, and --eth-dynamic-ip
target configuration options
2022-05-19 14:46:09 -07:00
ee58e5dbc7
Merge pull request #388 from swetland/hdmi
...
muselab: icesugarpro: fix HDMI output
2022-05-12 15:09:03 +02:00
0ce7f8354c
Add initial LimeSDR Mini V2 support (With SoC + USB3 (FT245PHYSynchronous)).
...
python3 -m litex_boards.targets.limesdr_mini_v2 --csr-csv=csr.csv --build --load
litex_server --jtag --jtag-config=openocd_limesdr_mini_v2.cfg
litex_term crossover
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2022 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on May 3 2022 18:59:46
BIOS CRC passed (5f29afcc)
LiteX git sha1: a4cc859d
--=============== SoC ==================--
CPU: VexRiscv @ 80MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128KiB
SRAM: 8KiB
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> ident
Ident: LiteX SoC on LimeSDR-Mini-V2 2022-05-03 18:59:29
2022-05-03 19:04:06 +02:00
ec220e4b5b
muselab: icesugarpro: fix HDMI output
...
- enable data_n outputs
- use drive_both property of updated VideoHDMIPHY to drive both
differential outputs
- adjust default clocking to successfully close timing
(sysclk at 50Mhz, HDMI at 25MHz, HDMIx5 at 125MHz)
2022-05-03 04:04:26 -07:00
3ebc9877ad
1bitsquared_icebreaker: Rename to icebreaker (Python does not like number as prefix for imports).
2022-05-02 13:20:40 +02:00
9914478854
xilinx_ac701: Add SPI-Flash support.
2022-04-28 11:05:51 +02:00
ae8bdb74a9
xilinx_kc705: Add SPI-Flash support.
2022-04-28 10:27:54 +02:00
68ea5fe057
platforms/colorlight_5a_75b/v7_0: Comment rst_n to avoid deadlock on reboot command.
2022-04-25 18:50:17 +02:00
39a314cdae
Rename aliexpress_u420t to aliexpress_xc7k420t.
2022-04-21 14:28:26 +02:00
06396a2cb6
Merge pull request #384 from hansfbaier/qmtech-ep4cgx150
...
add board support for QMTech EP4CGX150
2022-04-21 10:36:51 +02:00
b2a346edc8
aliexpress_u420t: Review/Simplify.
...
Specific integrated ROM/SRAM/MAIN_RAM size can be passed through command line parameters.
2022-04-21 10:32:18 +02:00
3e9e970076
Add aliexpress prefix to boards from aliexpress that seem to be from the same unknown vendor.
2022-04-21 10:06:11 +02:00
8c51cb12c8
Merge pull request #383 from sysmanalex/master
...
Added Kintex-7 xc7k420t xc7k420tiffg901-2L named as u420t board
2022-04-21 10:02:05 +02:00
b41d72e1d0
add board support for QMTech EP4CGX150
2022-04-16 06:36:24 +07:00
23b1b15486
Add initial/minimal Pluto SDR support.
2022-04-14 12:13:03 +02:00
1e00a43fdd
board u420t kintex update v0.2
2022-04-13 00:12:59 +03:00
89570b005c
Added Kintex-7 xc7k420t xc7k420tiffg901-2L named as u420t board
2022-04-12 22:38:14 +03:00
b99d788732
fairwaves/xtrx: Update with xtrx_julia improvements.
2022-04-12 17:42:52 +02:00
dd27a3473b
platforms: Add LambdaConcept's PCIe Screamer/M2.
2022-04-01 11:41:07 +02:00
867489d855
xilinx_zcu106: Add PCIe Gen3 X4 support.
2022-04-01 10:01:06 +02:00
299d4d66d6
efinix: ti60f225 add MIPI RX
2022-03-29 15:29:59 +02:00
13e5062793
Merge pull request #379 from chmousset/add_t8_devkit
...
[enh] added efinix t8f81 dev kit
2022-03-28 14:58:21 +02:00
e6a9f44580
Merge pull request #378 from antmicro/add-missing-peripherals
...
DDR4 datacenter: add missing peripherals
2022-03-28 14:40:22 +02:00
83d7c3fb39
Merge pull request #377 from Johnsel/arduino_mkrvidor4000
...
Board support for Arduino MKR Vidor 4000
2022-03-28 14:34:59 +02:00
7a68dcc79b
[enh] added efinix t8f81 dev kit
2022-03-26 09:52:20 +01:00
33516a40f4
antmicro_datacenter: add missing peripherals
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2022-03-25 13:49:41 +01:00
77cb866233
antmicro_datacenter: add HDMI output
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2022-03-25 10:03:07 +01:00
501c50ff79
Fixed serial port comments hinting the correct pins.
2022-03-24 08:04:47 -07:00
901942bda6
Cleanup for pushing. This commit combined with my litedram fork produces a running basic SoC + bios --=============== SoC ==================--
...
CPU:BUS:E 32-bit @ 4GiB
CSR:16-bit @ 48MT/s (CL-2 CWL-2)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 13.6MiB/s
Read speed: 21.3MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
2022-03-24 07:39:14 -07:00
e445c9ec71
qmtech_5cefa2: make serial pins consistent with other boards
2022-03-24 18:52:28 +07:00
bcedf573e0
adi_adrv2crr: Add IO definition for the AD9545 reset line
...
We use PULLUP on it so that the AD9545 is by default held out
of reset without the user having to do anything ...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
cdb78efd3c
adi_adrv2crr: Document I2C devices attached
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
6c31f16df2
adi_adrv2crr: Fix I2C signal assignement
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
73458ae9d7
decklink_quad_hdmi_recorder: Add Serial/UART pins.
2022-03-23 11:08:51 +01:00
d399f33dda
Merge pull request #374 from smunaut/adrv2crr
...
adi_adrv2crr: Upgrade part to speedgrade 2
2022-03-23 09:09:57 +01:00
dc92584681
adi_adrv2crr: Upgrade part to speedgrade 2
...
Even though the schematic and bom call for speedgrade 1, this was only for
the prototypes.
All productions units have been updated to speedgrade 2.
See this thread:
https://ez.analog.com/fpga/f/q-a/112356/adrv9009-zu11eg-speed-grade
And the official HDL project for the board:
https://github.com/analogdevicesinc/hdl/blob/master/projects/adrv9009zu11eg/adrv2crr_fmc/system_project.tcl#L16
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-22 23:36:41 +01:00
68c23e9251
faster sdcard boot on 2.0
2022-03-22 17:54:12 +01:00
b8b0aead28
Added basic support for Arduino MKR Vidor 4000
2022-03-21 18:54:29 -07:00
3ebad7f7cc
gsd_orangecrab/butterstick: Add assert on devices.
2022-03-18 10:44:21 +01:00
9faa805ab9
alinx_ax7010: Review/Cleanup.
2022-03-17 11:31:02 +01:00
3aa1042f5f
Merge pull request #367 from ggangliu/zynq_xc7z010
...
Add ALINX AX7010 board support
2022-03-17 09:52:04 +01:00
0f82db26da
rcs_artic_term_bmc_card: Fix is -> ==.
2022-03-17 09:45:47 +01:00
0e7145b4a1
Update and rename xilinx_alinx_ax7010.py to alinx_ax7010.py
2022-03-17 11:21:42 +08:00
0745162a29
xilinx_zcu102: Review/Cleanup for consistency with others boards.
...
Also remove INTERNAL_VREF constraints that are not yet useful (required for DRAM).
2022-03-16 18:47:05 +01:00
f4a48e51d7
add xilinx_zcu102 platform
2022-03-16 15:37:02 +01:00
5365c7fce4
Rename xilinx_zynq_xc7z010.py to xilinx_alinx_ax7010.py
2022-03-15 15:50:09 +08:00
4159faf48b
Add files via upload
...
Adding zynq_xc7z010 board support
2022-03-12 12:20:54 +08:00
688377de7c
lpddr4_test_board: Fix button pin
2022-03-11 15:59:43 +01:00
3b74673a93
Merge pull request #363 from curliph/master
...
add Gowin programmer support
2022-03-08 17:26:50 +01:00
f52a915487
lambdaconcept_ecpix5: Add initial Video support at 640x480 (with Terminal/Framebuffer).
...
I2C intialization code adapted from https://github.com/ultraembedded/ecpix-5 .
Tested with:
- python3 -m litex_boards.targets.lambdaconcept_ecpix5 --cpu-type=firev --with-video-terminal --build --load
- python3 -m litex_boards.targets.lambdaconcept_ecpix5 --cpu-type=firev --with-video-framebuffer --build --load
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2022 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Mar 8 2022 15:34:22
BIOS CRC passed (c7fe9ecd)
Migen git sha1: ac70301
LiteX git sha1: 7ebc7625
--=============== SoC ==================--
CPU: FireV-STANDARD @ 75MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128KiB
SRAM: 8KiB
L2: 8KiB
SDRAM: 524288KiB 16-bit @ 300MT/s (CL-6 CWL-5)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Read leveling:
m0, b00: |01110000| delays: 02+-01
m0, b01: |00000000| delays: -
m0, b02: |00000000| delays: -
m0, b03: |00000000| delays: -
best: m0, b00 delays: 02+-01
m1, b00: |01110000| delays: 02+-01
m1, b01: |00000000| delays: -
m1, b02: |00000000| delays: -
m1, b03: |00000000| delays: -
best: m1, b00 delays: 02+-01
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 13.6MiB/s
Read speed: 23.4MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> ident
Ident: LiteX SoC on ECPIX-5 2022-03-08 15:34:19
2022-03-08 15:40:52 +01:00
Brian Swetland
enjoy-digital
Hans Baier
Alex Petrov
Alex Petrov
Franck Jullien
Charles-Henri Mousset
Alessandro Comodi
John Simons
Sylvain Munaut
Goran Mahovlic
Yonggang Liu
Joseph Faye
Robert Szczepanski