Commit Graph

35 Commits

Author SHA1 Message Date
Florent Kermarrec 58489ebebf targets/BaseSoC: Cleanup parameters. 2022-11-08 12:31:49 +01:00
Florent Kermarrec 9e7079c4c8 targets: Remove int() on BaseSoC's sys_clk_freq. 2022-11-08 11:54:17 +01:00
Florent Kermarrec b0e6414519 targets: Cleanup arguments and switch --sys-clk-freq to float (avoid conversion in code). 2022-11-08 10:41:35 +01:00
Florent Kermarrec 16b9677acd targets: Switch to soc_core_argdict.
The next move was to remove soc_core and only keep soc; so this is probably the right time to do
it in targets to avoid having to handle it later.
2022-11-07 08:43:26 +01:00
Florent Kermarrec 33b0400aed targets: Update LiteXArgumentParser imports. 2022-11-06 21:39:52 +01:00
Gwenhael Goavec-Merou 9960f38d95 targets: replace LiteXSoCArgumentParser by LiteXArgumentParser, remove tasks done LiteXArgumentParser 2022-11-06 11:27:47 +01:00
Florent Kermarrec 548a028730 targets: Switch to LiteXModule to simplify/cleanup code. 2022-10-27 21:21:37 +02:00
Adam Zeloof 25c28d2c03 fixed issue with default programmer option 2022-09-10 18:16:04 +01:00
Adam Zeloof 6768be7f66 changed use example comment 2022-09-10 17:56:02 +01:00
Adam Zeloof 6d0a4c788e Added DFU support to Butterstick 2022-09-10 17:45:57 +01:00
Florent Kermarrec 45494f60e0 targets: Change SoC/Software headers generation behaviour (Now only generated with --build).
Re-generating the SoC/Software headers was causing some un-expected behaviours for users not familiar
with the flow. For example doing a --load with a different configuration, was re-generating the Software
headers and messing up things when trying to run software on the SoC.
2022-05-06 15:14:32 +02:00
Florent Kermarrec 877bc4b45e targets: Use full imports (vendor_board). 2022-05-02 12:55:11 +02:00
Florent Kermarrec a611f035d6 targets: Move CRG before SoCCore init (More logical and simplify some specific reset schemes) and switch SoCCore to one line when possible.
Moving CRG simplify reset with NaxRiscv debug module and is in fact more logical.
Also do some minor updates/cosmetic changes while touching CRG/SoCCore.
2022-04-21 12:19:45 +02:00
enjoy-digital f986855926
Merge pull request #372 from mkj/butterstick-ethdelay
butterstick: set ethernet rx_delay to 0ns
2022-04-21 09:00:13 +02:00
Florent Kermarrec 00ff61baa9 targets: Simplify clock domains and remove useless reset_less.
rst was not directly assigned/used on reset_less clock domains, so reset_less
property was not really useful. With the changes on stream.CDC, having a rst
(Even fixed at 0) is now mandatory on clock domains involved in the CDC, so this
also fixes targets.
2022-04-01 11:30:38 +02:00
Florent Kermarrec 2a206def0f targets/ecp5/ddr3: Uniformize cd_sys2x (reset_less). 2022-03-22 17:32:35 +01:00
Matt Johnston 53c221a1fa butterstick: set ethernet rx_delay to 0ns
The Microchip KSZ9031RNX PHY on the Butterstick has a default 1.2ns
internal RX delay so we shouldn't add the default 2ns MAC delay.

In testing with Linux on vexriscv I haven't seen any difference either
way, but with liteeth in Microwatt I have seen 30%+ packet loss when
receiving from certain ethernet devices (RTL8153 and AX88179 usb-gige
adapters, a GS105 switch didn't show the problem). Setting RX delay=0
resolves the problem. A TX delay is still required by the PHY.
2022-03-22 13:51:03 +08:00
Florent Kermarrec 9d452b0d74 targets: Create target_group for target arguments. 2022-03-21 18:37:40 +01:00
Florent Kermarrec cc8da9d341 targets: Simplify imports and switch to LiteXSocArgumentParser.
CPU parameters are now selectively exposed to the user:
./digilent_arty.py --cpu-type=vexriscv_smp --help will show VexRiscv-SMP parameters.
./digilent_arty.py --cpu-type=naxriscv --help will show NaxRiscv parameters.
2022-03-21 16:59:40 +01:00
Florent Kermarrec 773444a7dd targets: Switch to get_bios_filename/get_bitstream_filename. 2022-03-17 09:21:05 +01:00
Florent Kermarrec 5f2ccb2d32 targets: Switch from bridge to crossover. 2022-01-19 17:03:17 +01:00
Florent Kermarrec fccb952c4b target: Remove ident_version=True no longer required. 2022-01-18 17:13:02 +01:00
Florent Kermarrec a4130556ac gsd_butterstick: Add optional SYZYGY GPIO (--with-syzygy-gpio) to expose the 32 GPIOs on SYZYGY breakout board. 2022-01-06 18:37:42 +01:00
Florent Kermarrec 53dc00eab7 targets/parser: Rely on argparse.ArgumentDefaultsHelpFormatter to provide default in help description.
Also do minor adjustments while doing this.
2022-01-05 17:06:40 +01:00
Greg Davill fd2ec534a7 butterstick: Add extra pins 2021-12-05 20:33:28 +10:30
Greg Davill c8a8e943b5 butterstick: add --sdram-device option
Set 64M16 as default sdram-device.

Related to #298
2021-12-04 17:07:06 +10:30
Florent Kermarrec 91818bc5f0 targets/gsd_butterstick/BaseSoC: Set default device to 85F (consistency with default arguments). 2021-10-26 17:01:55 +02:00
Florent Kermarrec 9e18d9bc34 gsd_butterstick: Remove ECLKBRIDGECS (not required). 2021-10-07 14:09:22 +02:00
Florent Kermarrec 68fb163a27 targets: Remove spiflash mapping on targets where it's no longer useful. 2021-09-14 18:35:13 +02:00
Florent Kermarrec aa2209729f gsd_butterstick: Force uart_name to crossover when set to serial. 2021-09-02 15:23:05 +02:00
Florent Kermarrec fddca1cd40 gsd_butterstick: Add SDCard (SPI & SD modes) support. 2021-09-02 14:06:09 +02:00
Florent Kermarrec 596f430326 gsd_butterstick: Add SPI Flash support. 2021-09-02 11:28:21 +02:00
Florent Kermarrec 55ea71bd01 gsd_butterstick: Add initial DDR3 support.
Validated with:
./gsd_butterstick.py --uart-name=crossover --with-etherbone --csr-csv=csr.csv --build --load
litex_server --udp
litex_term bridge


        __   _ __      _  __
       / /  (_) /____ | |/_/
      / /__/ / __/ -_)>  <
     /____/_/\__/\__/_/|_|
   Build your hardware, easily!

 (c) Copyright 2012-2021 Enjoy-Digital
 (c) Copyright 2007-2015 M-Labs

 BIOS built on Sep  1 2021 19:09:52
 BIOS CRC passed (3d349845)

 Migen git sha1: 27dbf03
 LiteX git sha1: 315fbe18

--=============== SoC ==================--
CPU:		VexRiscv @ 75MHz
BUS:		WISHBONE 32-bit @ 4GiB
CSR:		32-bit data
ROM:		128KiB
SRAM:		8KiB
L2:		8KiB
SDRAM:		524288KiB 16-bit @ 300MT/s (CL-6 CWL-5)

--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Read leveling:
  m0, b00: |01110000| delays: 02+-01
  m0, b01: |00000000| delays: -
  m0, b02: |00000000| delays: -
  m0, b03: |00000000| delays: -
  best: m0, b00 delays: 02+-01
  m1, b00: |01110000| delays: 02+-01
  m1, b01: |00000000| delays: -
  m1, b02: |00000000| delays: -
  m1, b03: |00000000| delays: -
  best: m1, b00 delays: 02+-01
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
  Write: 0x40000000-0x40200000 2.0MiB
   Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
  Write speed: 13.6MiB/s
   Read speed: 15.6MiB/s

--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found

--============= Console ================--

litex>
2021-09-01 19:21:16 +02:00
Florent Kermarrec 1f25a98476 butterstick: Add Ethernet/Etherbone support (UART crossover working over Etherbone). 2021-09-01 18:03:13 +02:00
Florent Kermarrec 1f149ece6b Add intial ButterStick support (with just Clk, Buttons and Leds). 2021-09-01 17:33:54 +02:00