26943959b5
Merge pull request #268 from trabucayre/runber_support
...
Add runber support
2021-09-15 08:32:05 +02:00
1ca77d6921
Merge pull request #267 from trabucayre/tangnano4k_fix_period
...
platforms/sipeed_tang_nano_4k: fix period computation
2021-09-15 08:28:19 +02:00
7ccae3332d
Add runber support
2021-09-15 06:50:57 +02:00
fed36afaba
platforms/sipeed_tang_nano_4k: fix period computation
2021-09-15 06:46:29 +02:00
68fb163a27
targets: Remove spiflash mapping on targets where it's no longer useful.
2021-09-14 18:35:13 +02:00
db91eda899
linsn_rv901t.py: Update Ethernet and add Etherbone support.
2021-09-13 19:35:05 +02:00
b9f2a4c483
Merge pull request #266 from teknoman117/mojov3
...
Add Mojo V3 support
2021-09-10 14:01:59 +02:00
b8373a361d
alchitry_mojo: new board
2021-09-10 02:40:31 -07:00
d4613562a8
Merge pull request #265 from trabucayre/tangNano4K_connector
...
platforms/sipeed_tang_nano_4k: add P6 and P7 connectors
2021-09-09 11:43:05 +02:00
cacb76450f
Merge pull request #264 from teknoman117/alchitry-au
...
Add Alchitry Au as new board
2021-09-09 11:42:37 +02:00
3622661fa8
test/test_targets: Remove build directory before build.
2021-09-09 11:36:18 +02:00
945e48ea83
platforms/sipeed_tang_nano_4k: add P6 and P7 connectors
2021-09-09 11:35:14 +02:00
8d91489756
tang_nano_4k: Add more IOs.
2021-09-09 11:23:20 +02:00
9bbdb87130
alchitry_au: new board
2021-09-09 00:03:19 -07:00
88534c6689
tang_nano_4k: Fix typo in sipeed.
2021-09-08 23:02:39 +02:00
ce52c8c5ed
beaglewire: Fix typo in qwertyembedded.
2021-09-08 21:29:29 +02:00
ecebe7e267
Add initial SiSpeed Tang Nano 4K support (Led blink only for now...).
...
./sispeed_tang_nano_4k.py --build --load
Build with Gowin EDA.
Load with OpenFPGALoader.
2021-09-08 19:36:46 +02:00
129b95f9b5
sqrl_acorn: Update pre_placement_commands with new XilinxVivadCommands.
2021-09-08 16:27:30 +02:00
7fa22a494b
arty: Switch SPI Flash rate to 1:2 (DDR) (Possible on Arty since SPI Flash's clk does not require use of STARTUPE2).
...
On the Digilent Arty, the SPI Flash's clk is connected to CCLK (that can be driven
through the STARTUPE2) but also to another generic IO that can be use to drive the
clock through DDR primitives.
2021-09-07 15:07:59 +02:00
aa2209729f
gsd_butterstick: Force uart_name to crossover when set to serial.
2021-09-02 15:23:05 +02:00
fddca1cd40
gsd_butterstick: Add SDCard (SPI & SD modes) support.
2021-09-02 14:06:09 +02:00
596f430326
gsd_butterstick: Add SPI Flash support.
2021-09-02 11:28:21 +02:00
1bbbf5b3e7
gsd_butterstick: Add SYZYGY0/1 IOs to connectors.
2021-09-02 10:26:18 +02:00
55ea71bd01
gsd_butterstick: Add initial DDR3 support.
...
Validated with:
./gsd_butterstick.py --uart-name=crossover --with-etherbone --csr-csv=csr.csv --build --load
litex_server --udp
litex_term bridge
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2021 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Sep 1 2021 19:09:52
BIOS CRC passed (3d349845)
Migen git sha1: 27dbf03
LiteX git sha1: 315fbe18
--=============== SoC ==================--
CPU: VexRiscv @ 75MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 128KiB
SRAM: 8KiB
L2: 8KiB
SDRAM: 524288KiB 16-bit @ 300MT/s (CL-6 CWL-5)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Read leveling:
m0, b00: |01110000| delays: 02+-01
m0, b01: |00000000| delays: -
m0, b02: |00000000| delays: -
m0, b03: |00000000| delays: -
best: m0, b00 delays: 02+-01
m1, b00: |01110000| delays: 02+-01
m1, b01: |00000000| delays: -
m1, b02: |00000000| delays: -
m1, b03: |00000000| delays: -
best: m1, b00 delays: 02+-01
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 13.6MiB/s
Read speed: 15.6MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex>
2021-09-01 19:21:16 +02:00
1f25a98476
butterstick: Add Ethernet/Etherbone support (UART crossover working over Etherbone).
2021-09-01 18:03:13 +02:00
1f149ece6b
Add intial ButterStick support (with just Clk, Buttons and Leds).
2021-09-01 17:33:54 +02:00
fb9bb17835
Merge pull request #259 from danc86/clnexevn-unreserve-spi-flash-pins
...
lattice_crosslink_nx_evn: don't set MASTER_SPI_PORT=SERIAL
2021-09-01 12:18:41 +02:00
b3823d92b0
Add CONTRIBUTORS file.
2021-09-01 11:11:27 +02:00
74c2178150
lattice_crosslink_nx_evn: don't set MASTER_SPI_PORT=SERIAL
...
Setting MASTER_SPI_PORT=SERIAL causes the SPI flash pins to be reserved
for use by the sysCONFIG logic, and prevents user logic from assigning
them. This made it impossible to have a Litex design which accesses the
SPI flash on this board.
Remove the setting, so that we get the default behaviour which permits
user logic to assign these pins. In the unlikely event that someone
needs the pins to stay reserved for sysCONFIG after configuration (I'm
not sure why this would be needed) they could explicitly add this
command in their design.
2021-09-01 18:47:17 +10:00
4731c500fb
Merge pull request #258 from danc86/clnexevn-device-arg
...
lattice_crosslink_nx_evn: allow specifying the FPGA device
2021-09-01 10:22:42 +02:00
ce254208ff
beaglewire: Review/Cleanup for consistency with other targets.
...
- Now uses regular UART.
- Build tested with: ./quertyembedded_beaglewire.py --cpu-type=serv --build
- Can still be build with Crossover UART with --uart-name=crossover+bridge.
2021-09-01 10:18:11 +02:00
35df77258a
beaglewire: Rename to quertyembedded_beaglewire.
2021-09-01 09:36:09 +02:00
1e1f6a476d
Merge pull request #254 from ombhilare999/master
...
beaglewire platform and target added
2021-09-01 09:33:07 +02:00
4a18951651
tul_pynq_z2: Fix copyrights, remove PS7 part for now.
2021-09-01 08:50:56 +02:00
54c777a49c
Merge pull request #252 from developandplay/PYNQ-Z2
...
WIP: Initial PYNQ Z2 support
2021-09-01 08:46:44 +02:00
6a08a7973c
Merge pull request #251 from niw/fix_orangecrab_feather_spi_pad_name
...
FIX: OrangeCrab Feather SPI pad name
2021-08-31 18:59:09 +02:00
8f1c15bdb8
ebaz4205: Remove PS7 support for now (since untested and we'll avoid the .xci in LiteX-Boards repository).
2021-08-31 18:56:47 +02:00
781d83bab6
Add support for EBAZ4205 'Development' Board
...
Usage:
```
./ebaz4205.py --cpu-type=vexriscv --build --load
```
```
$ pwd
litex-boards/litex_boards/targets
```
Tip: Use `GTKTerm` to connect to /dev/ttyUSB0 (usually) and interact
with the LiteX BIOS.
References:
- https://github.com/fusesoc/blinky#ebaz4205-development-board
- https://github.com/olofk/serv/#ebaz4205-development-board
- https://github.com/xjtuecho/EBAZ4205#ebaz4205
- https://github.com/nmigen/nmigen-boards/pull/180 (merged)
- https://github.com/olofk/corescore/pull/33
- The existing 'Zybo Z7' example
Note: The `PS7` stuff remains untested via LiteX for now.
2021-08-31 18:54:49 +02:00
fc78c96444
FIX: OrangeCrab Feather SPI pad name
...
**Problems**
`SPIMaster` pad names are `clk`, `cs_n`, `mosi`, and `miso`.
However, `feather_spi` is using `sck` instead of `clk`, therefore
it is not able to use as-is for `SPIMaster`, for example,
with `add_spi` on Linux On LiteX VexRiscv.
**Solution**
In fact, `spisdcard` and other SPI related pad names are
using `clk`, only `feather_spi` is using `sck`.
Therefore, rename `sck` to `clk`.
2021-08-29 17:59:45 -07:00
b017a33f2b
targets: Fix SPI Flash mapping on target supporting --with-spi-flash.
2021-08-23 18:05:40 +02:00
cc9e39286a
lattice_crosslink_nx_evn: allow specifying the FPGA device
...
This board is documented as having the LIFCL-40-9BG400C part, but some
versions of the board exist which were fitted with LIFCL-40-8BG400CES,
an engineering sample part. The distinction is important because the
engineering sample requires a different device ID to be embedded in the
bitstream. If you try to build a bitstream for LIFCL-40-9BG400C and load
it onto LIFCL-40-8BG400CES the configuration fails (indicated by the red
"INITN" LED on this board).
Accept --device to allow the user to specify which FPGA part their board
has.
2021-08-17 18:30:03 +10:00
f1e1ae2f71
Merge pull request #256 from alainlou/master
...
update IRC channel in README
2021-08-16 11:53:37 -07:00
126c98488a
update IRC channel
2021-08-16 14:18:08 -04:00
db9c98b28a
beaglewire platform and target added
2021-08-16 20:14:45 +05:30
22e823d756
Initial PYNQ Z2 support
2021-08-13 16:23:39 +02:00
b77b1514ce
Merge pull request #250 from david-sawatzke/fullmemwe
...
colorlight_5a_75x: Disable full_memory_we for l2 cache by default
2021-08-11 09:53:47 +02:00
9f5e8d4864
colorlight_5a_75x: Disable full_memory_we for l2 cache by default
...
Leads to an increase in DP16KD, first noticed in
https://github.com/enjoy-digital/liteeth/issues/70 .
With full_mem_we:
```
Info: DP16KD: 41/ 56 73%
```
Without:
```
Info: DP16KD: 29/ 56 51%
```
2021-08-08 14:37:46 +02:00
b81309401e
Initial Digilent Atlys support
2021-08-06 13:24:19 +02:00
615b97e205
tinyfpga_bx: Switch to LiteSPI.
2021-07-30 08:18:15 +02:00
90fcaec287
targets/radiona_ulx3s: Switch to LiteSPI.
2021-07-30 08:10:52 +02:00
enjoy-digital
Gwenhael Goavec-Merou
Nathaniel R. Lewis
Dan Callaghan
Dhiru Kholia
Yoshimasa Niwa
Tim Ansell
alainlou
ombhilare999
Martin Troiber
David Sawatzke
MV