0607e926c8
com/liteethmini/phy: remove use of FlipFlop in MII
2015-10-23 20:23:45 +02:00
71993edae4
Add init file in sdram/phy dir
...
Without __init__.py file, when using setup.py, setuptools' find_package() function does not find the files in sdram/phy package. Hence .egg file entirely misses sdram/phy directory
More info here: https://bitbucket.org/pypa/setuptools/issues/97
2015-09-21 23:46:16 +08:00
b2a4eead0c
uart/software: remove litescope dependency
2015-09-21 09:04:59 +02:00
31956de790
dvisampler/edid: fix sda sampling, needs to be similar to scl.
...
Video sources with high scl frequency were not able to access EDID information through I2C.
I2C start was not detected correctly and was randomly reseting the fsm during transfers.(seen with litescope)
2015-09-10 20:51:10 +02:00
40f47f447a
create liteethmini and move liteeth to a separate repo ( https://github.com/enjoy-digital/liteeth )
...
LiteEthMini is a subset of LiteEth intended to be used with a CPU and a software stack.
2015-09-08 01:33:57 +02:00
8e8cc8e5a6
move liteusb to a separate repo ( https://github.com/enjoy-digital/liteusb )
2015-09-07 12:44:47 +02:00
e49a3c20c8
move litesata to a separate repo ( https://github.com/enjoy-digital/litesata )
2015-09-07 12:27:40 +02:00
bbeb8a466d
move litescope to a separate repo ( https://github.com/enjoy-digital/litescope )
2015-09-07 12:04:04 +02:00
35e3853f6e
move litepcie to a separate repo ( https://github.com/enjoy-digital/litepcie )
2015-09-07 11:11:43 +02:00
bedf3ed9a6
misoclib/soc: fix add_constant when used for strings
2015-09-01 16:57:50 +02:00
a4808ace6f
litecores: remove unneeded AutoCSR inheritance in example designs (thanks William D. Jones)
2015-08-26 22:36:48 +02:00
e91ce85cfd
litescope/core/port: fix missing self.comb...
2015-08-24 20:12:39 +02:00
27b1dd7d9e
litescope/core/port: fix EdgeDetector CSRs names
2015-08-24 19:40:53 +02:00
fd31e6ae61
litescope/core/port: fix LiteScopeEdgeDetector (refactoring issues)
2015-08-24 18:23:38 +02:00
f3d68a54d5
liteth/phy: simplify clk_freq in LiteEthPHY autodetect function (thanks Sebastien)
2015-08-22 16:30:42 +02:00
a1e4183b3f
sdram/phy/s6ddrphy: fix comment on S6QuarterRateDDRPHY
2015-08-22 12:50:41 +02:00
de87d65f68
sdram/module: add P3R1GE4JGF DDR2 (Atlys) and MT41J128M16 DDR3 (Opsis, Novena) modules.
2015-08-22 12:42:44 +02:00
50e857e99c
sdram/phy/s6ddrphy: add S6QuarterRateDDRPHY to run DDR3 at higher frequencies.
...
Built on top of S6HalfRateDDRPHY, exposes a 4 phases DFI interface to the controller with a 2x slower clock.
Validated on the Numato Lab opsis board (50MHz sys_clk/ DDR400), should also work on the Novena laptop (same DDR3 module).
2015-08-22 12:17:48 +02:00
8bb30a8620
liteeth/phy: fix autodetect (clk_freq not necessary passed in kwargs)
2015-08-22 12:08:49 +02:00
158fbe49ac
sdram/phy/s6ddrphy: rename S6DDRPHY to S6HalfRateDDRPHY and use ORed wrdata_en/rddata_en (the controller already manages that)
2015-08-22 11:47:26 +02:00
4acab79987
sdram/module: cleanup indent
2015-08-20 22:15:06 +02:00
63538a7d04
litecores: add -Ob option to make.py (allow to build with yosys for example)
2015-08-19 01:17:37 +02:00
3d3cd128d8
liteeth/phy: only use clk_freq for LiteEthPHYGMIIMII in autodetect
2015-08-19 01:17:35 +02:00
3cf46671e9
liteeth/phy: rename rgmii to s6rgmii since specific to Spartan6
...
Also remove autodetection support for RGMII. For it to work we would need to pass the device we are building for.
2015-08-05 10:33:08 +02:00
4b8d9b67f3
liteeth: add rgmii phy
2015-08-05 00:50:55 +02:00
c03ef526eb
sdram/phy/s6ddrphy: add DDR3 support
2015-08-04 12:29:42 +02:00
52fba05e26
sdram/phy/initsequence: add burst chop 4 (BC4) for DDR3
...
This is needed for half rate controllers with burst length of 4.
For best efficiency quarter rate controllers should be used.
2015-08-04 11:19:20 +02:00
4b6bd43d8e
Enable ror, ffl1 and addc for OR1K.
2015-07-30 10:55:01 +03:00
a4e14f1058
Don't build base libraries and BIOS with -fPIC after all.
2015-07-29 12:09:05 +03:00
b7aff65ca9
mor1kx: enable ADDC, CMOV and FFL1 instructions
2015-07-29 00:08:21 +08:00
f2eff4d10e
soc: increase default BIOS size
2015-07-28 22:36:42 +08:00
c8ffd0c9ee
Switch to -fPIC.
...
Using -fPIC for everything allows to link the MiSoC static libraries
both into static images such as the BIOS as well as
into shared libraries.
2015-07-26 16:06:48 +03:00
8d1c555e36
misoclib/com/uart: remove irq condition parameters and use "non-full" for tx irq, "non-empty" for rx irq.
...
An optimal solution for both sync and async mode is not easy to implement, it would requires moving CDC out of UART module and handling in the PHY with AsyncFIFO or minimal depth.
For now use the solution that works for both cases. We'll try to optimize that if we have performance issues.
2015-07-25 00:25:09 +02:00
ce11b30140
misoclib: integrate mxcrg.py in mlabs_video target, remove others directory
...
we should also get rid of mxcrg.v (similar to what is done on papilio or pipstrello)
2015-07-24 23:16:45 +02:00
b75b93df43
misoclib/com/uart: replace revered Migen FIFO function with specific _get_uart_fifo function for our use case.
2015-07-24 14:05:54 +02:00
0a115f609e
litepcie/frontend/dma: group loop index and count in loop_status register (avoid 2 register reads)
2015-07-24 13:52:57 +02:00
d73d75007e
misoclib/com/uart: cleanup and add irq condition parameters
...
- reintroduce RX/TX split (ease comprehension)
- use FIFO wrapper function from Migen.
- add tx_irq_condition and rx_irq_condition
2015-07-24 12:57:42 +02:00
b1ea3340f3
litepcie/frontend/dma: add loop counter (useful to detect missed interrupts)
2015-07-22 22:55:11 +02:00
dfc207aacb
litepcie: use data instead of dat in dma_layout (allow use of migen.actorlib.packet modules on dma dataflow)
2015-07-22 21:44:53 +02:00
40740d3ddc
litepcie: use optional platform.misoc_path to add litepcie phy wrapper verilog files
...
We should eventually try to use python package_data or data_file for that.
2015-07-22 18:09:04 +02:00
a501d7c52d
uart: support async phys
2015-07-19 23:37:00 +02:00
4dca66b23d
misoclib/video/dvisampler: add fifo_depth parameter
2015-07-13 11:03:33 +02:00
e6da1d16b2
wishbone2lasmi: fix "READ_DATA" state
2015-07-09 10:40:32 +02:00
0545d49294
liteeth/core: add with_icmp parameter
2015-07-06 21:31:20 +02:00
e011f9378f
use sets for leave_out
2015-07-05 22:49:23 +02:00
c100ef6406
liteeth/core/mac: adapt depth on AsyncFIFOs according to phy (reduce ressource usage with MII phy)
2015-07-05 22:45:53 +02:00
c1ca928ec2
liteeth: small logic optimizations on mac (eases timings on spartan6)
2015-07-05 12:31:52 +02:00
31a447154d
soc: support constants without value
2015-06-28 21:35:37 +02:00
04c64eb1d8
litesata/example_designs: fix core generation (RAID introduced some changes on the PHY)
2015-06-26 00:20:58 +02:00
52e6bf6987
litesata/test: Add missing dependency on scrambler in bist_tb
2015-06-26 01:20:25 +02:00
Florent Kermarrec
Rohit Kumar Singh
whitequark
Sebastien Bourdeauducq
Robert Jordens
Olof Kindgren