1281a463d6
litescope/bridge: create a generic wishbone bridge that can be used with different phys (the phy needs to provide a sink/source with 8bits data).
...
- we can now pass a phy to LiteScopeWishboneBridge
- LiteScopeUART2Wishbone is only a specific LiteScopeWishboneBridge
- UART mux is removed since complicated and no longer useful (we can now create easily virtual UART over Ethernet, USB or PCIe) or simply add another UART for debug.
2015-05-01 17:51:18 +02:00
d253adee61
liteeth: use Migen's Packetizer/Depacketizer, remove generic and move etherbone/tty to frontend
2015-04-28 18:51:40 +02:00
91c77d464c
liteeth: use new Migen modules from actorlib (avoid duplications between cores)
2015-04-27 15:06:37 +02:00
0b1a2e1022
liteeth: do MII/GMII detection in gateware for gmii_mii phy
2015-04-26 18:08:07 +02:00
07b7c2a13f
liteeth/phy/gmii: add default value for pads_register
2015-04-26 14:54:54 +02:00
ae71bf2830
liteeth: fix and improve 10/100/1000Mbps speed auto detection
2015-04-26 14:54:53 +02:00
130fd19dec
liteeth/core/ip: simplify ip rx checksum control
2015-04-24 11:31:10 +02:00
5b48e7bb52
liteeth: finish with_preamble_crc vs with_hw_preamble_crc renaming
2015-04-24 11:30:35 +02:00
2d56d32009
liteeth/mac/core: simplify and fix padding
2015-04-24 09:36:33 +02:00
5a930fe7cf
lite* cores: changes permissions (+x) on make.py files and on litepcie init.sh file
2015-04-18 08:51:59 -04:00
2bd38f44a3
liteeth: more pep8 (when convenient), should be almost OK
2015-04-13 13:02:04 +02:00
154d3d3b04
liteeth: pep8 (E265)
2015-04-13 11:27:01 +02:00
45dc4920ec
liteeth: pep8 (E261, E271)
2015-04-13 11:07:50 +02:00
021a5ae8a0
liteeth: pep8 (W292)
2015-04-13 10:58:45 +02:00
a84f12618b
liteeth: pep8 (E225)
2015-04-13 10:56:18 +02:00
66ce40d880
liteeth: pep8 (E222)
2015-04-13 10:48:59 +02:00
ff2d7f9adc
liteeth: pep8 (E401)
2015-04-13 10:45:09 +02:00
726fd3ab42
liteeth: pep8 (E203)
2015-04-13 10:39:46 +02:00
8dc817dd70
liteeth: pep8 (E231)
2015-04-13 10:31:18 +02:00
9c527742cb
liteeth: pep8 (E201)
2015-04-13 10:23:33 +02:00
5720638d85
liteeth: pep8 (E302)
2015-04-13 10:20:02 +02:00
cd43eaffc2
liteeth: pep8 (replace tabs with spaces)
2015-04-13 09:53:43 +02:00
afa9b889ae
liteeth/phy/gmii: fix clock generation for mii mode (clock_pads.tx is an input)
2015-04-12 22:15:45 +02:00
8e639160e3
liteeth/phy/gmii_mii: add pads registers in RX
2015-04-12 20:43:01 +02:00
0c27708b0a
liteeth/phy/gmii_mii: avoid doubling pads register on TX
2015-04-12 20:42:12 +02:00
bc81d9d639
liteeth/phy/__init__.py: add more comments
2015-04-12 18:56:46 +02:00
515398634f
liteeth/phy/gmii_mii: add clock counter and use it in bios to select mode
2015-04-12 18:42:52 +02:00
857bee8a00
liteeth/phy: add GMII/MII phy
...
for now swicth is manual, we will need a clk counter to allow software or logic to automatically switch between GMII and MII
2015-04-12 17:25:55 +02:00
cfac3d9f5c
liteeth/phy/mii: simplify LiteEthPHYMIIRX using Converter
2015-04-12 16:03:21 +02:00
ddae41f2e4
liteeth/phy/mii: simplify LiteEthPHYMIITX using Converter
2015-04-12 15:34:56 +02:00
8c722db54e
liteeth/phy/mii: assign tx_er only if exists (as it's done on GMII)
2015-04-12 14:43:35 +02:00
4329e3e1b9
liteeth/phy/mii: allow use of MII phy on GMII/MII chips that do not have phy clock provided by the FPGA (tested on KC705)
2015-04-12 14:28:17 +02:00
603a4ef51e
liteeth: adapt to new ModuleTransformer
2015-04-10 11:42:25 +08:00
03aa972bb6
lite*: finish ModuleTransformer adaptations (need to be tested on board)
2015-04-08 23:27:22 +02:00
66f8dcbfaf
lite*: adapt to new ModuleTransformer semantics
...
NOTE: There is loads of duplicated code between the lite*
modules that should be shared.
2015-04-04 19:17:24 +08:00
dcdf5df4de
adapt LiteEth to new SoC
2015-04-01 22:50:29 +02:00
9107710f03
litexxx cores: use default baudrate of 115200 for all tests
2015-03-20 12:22:53 +01:00
84b631c929
liteeth/mac/core: add with_padding option (enabled by default) and change with_hw_preamble_crc option to with_preamble_crc
2015-03-19 14:52:02 +01:00
6bdf60567c
liteeth/mac/core: fix hw_preamble_crc register generation
2015-03-19 13:03:27 +01:00
236ea0f572
liteeth: use bios ip_address in example designs
2015-03-18 18:18:43 +01:00
a266deb58e
LiteXXX cores: fix frequency print in test/test_regs.py
2015-03-17 16:01:25 +01:00
d2cb41bc63
LiteXXX cores: convert port parameter to int if is digit in test/make.py
2015-03-17 15:58:21 +01:00
2327710387
liteeth/phy/gmii : set tx_er to 0 only if it exits
2015-03-17 12:24:06 +01:00
408d0fd2dd
liteeth: use default programmer in make.py
2015-03-17 12:12:21 +01:00
ec6ae75065
liteeth: use CRG from Migen in base example
2015-03-17 12:11:51 +01:00
faf185d58d
liteeth: make gmii phy generic
2015-03-16 23:04:37 +01:00
c3c7f627d9
liteeth/phy: typo (thanks sb)
2015-03-12 21:54:10 +01:00
767d45727a
uart/liteeth: only import the phy we are going to use (UARTPHYSim cannot be imported on Windows since based on pty).
2015-03-12 16:57:38 +01:00
6cbf13036b
liteeth/mac: fix padding limit (+1), netboot OK with sim platform
2015-03-09 20:59:34 +01:00
47cceea222
liteeth/mac: use Counter in sram and move some logic outside of fsms
2015-03-09 20:22:14 +01:00
Florent Kermarrec
Sebastien Bourdeauducq
Robert Jordens