0a80e4c3d6
libbase/memtest: revert previous printf (the informations are provided below and this make it too verbose).
2020-10-07 12:42:58 +02:00
5e2a4efac6
Merge pull request #665 from fidergo-stephane-gourichon/more_precise_log
...
More precise memory performance test.
2020-10-07 12:38:44 +02:00
83b4447f0e
Merge pull request #662 from fidergo-stephane-gourichon/dfu-util_with_-R
...
Unconditionally ask dfu-util to "Issue USB Reset"
2020-10-07 12:37:53 +02:00
305092c7b8
test/test_icap: update.
2020-10-07 12:36:08 +02:00
ad7671f811
soc/cores/icap/ICAP: add with_csr parameter and add_reload method to allow reloading the FPGA from the logic.
2020-10-06 17:38:39 +02:00
42025dcbfa
Merge pull request #666 from gsomlo/gls-sdcard-cd
...
bios: add command returning card-detect pin status
2020-10-06 10:31:25 +02:00
026d40ffab
bios: add command returning card-detect pin status
2020-10-05 14:32:06 -04:00
6916674ff6
Merge pull request #664 from antmicro/symbiflow_a100T
...
build/xilinx/symbiflow: Add xc7a100tscg324-1 to supported devices
2020-10-05 19:25:18 +02:00
81257da9b4
Merge pull request #663 from fidergo-stephane-gourichon/fix_crash_on_minimal_cpu
...
Fix SoC CPU crash on minimal variants on call to flush_cpu_dcache().
2020-10-05 19:24:43 +02:00
1a603b3fee
Merge pull request #654 from pepijndevos/gowin
...
Build support for Gowin
2020-10-05 19:23:47 +02:00
f71275a3f1
Show speeds in bytes per second.
...
Forcing megabytes per second for everyone does not make sense.
Showing bytes per second allows to distinguish between low performance and a performance measurement bug.
Anyway previous code claims speeds were in MiB/s, they were not, actually MB/s.
2020-10-05 18:46:05 +02:00
cbbbb3f468
Only display write speed if write test actually performed.
2020-10-05 18:43:45 +02:00
5b0ced00b5
Confirm parameters in log.
2020-10-05 17:58:44 +02:00
48638f936b
Fix SoC CPU crash on minimal variants on call to flush_cpu_dcache().
...
Generated soc.h says for example
but code tester for CONFIG_CPU_VARIANT_MIN not MINIMAL.
Attempted to run instruction unknown to this CPU, most likely cause of hang.
2020-10-05 17:16:35 +02:00
e47f84ea79
Unconditionally ask dfu-util to "Issue USB Reset signalling once we're finished".
...
Some host machines need it.
If issuing -R always does not cause any trouble, then do it.
2020-10-05 17:16:10 +02:00
aebe08d841
Merge pull request #661 from yetifrisstlama/fix_stream2wishbone
...
Fix stream2wishbone
2020-10-05 17:16:04 +02:00
2d6f19a816
Merge pull request #659 from shawnanastasio/toolchain-fixes
...
Add riscv*-unknown-linux-gnu triples and fix existing riscv-linux-gnu triple
2020-10-05 17:09:59 +02:00
ff4afda305
build/xilinx/symbiflow: Add xc7a100tscg324-1 to supported devices
...
Signed-off-by: Robert Winkler <rwinkler@antmicro.com>
2020-10-05 17:02:51 +02:00
acdfae202b
Stream2Wishbone: drive sink.ready line
2020-10-04 18:19:39 -07:00
6e3e979a0b
serial2tcp.c json error handling, respect rx.ready
2020-10-04 18:17:28 -07:00
fa82d97aa5
cores/cpu: Add riscv*-unknown-linux-gnu triple, fix riscv-linux-gnu
...
Add riscv*-unknown-linux-gnu to known triples, and fix the existing
riscv-linux-gnu by removing the incorrect -gcc suffix from the
triple.
2020-10-02 18:31:48 -05:00
6fd48ca2ce
software: Use -fno-stack-protector
...
This allows riscv*-gnu-linux toolchains to be used to build LiteX
software. Without this, references to undefined stack guard symbols
get generated and linking fails.
2020-10-02 13:42:16 -05:00
c77da3a8bc
RFC: json2dts: set CPU clock-frequency and SoC bus-frequency
...
FIXME: timebase-frequency isn't to be used as the raw CPU clock, so
on vexriscv we might want to re-evaluate also setting *that* to the
`CONFIG_CLOCK_FREQUENCY`. Decide whether to keep the SoC's
`bus-frequency` cell, or whether to go with the CPU's `clock-frequency`
only.
2020-10-01 06:59:45 -04:00
b84a858b2c
CHANGES: initialize changes since last release.
2020-10-01 11:46:43 +02:00
ba2ff8cf71
tools/litex_sim: update get_sdram_phy_settings (rd/wrcmdphase no longer exposed as PhySettings).
2020-10-01 11:27:33 +02:00
2b62802961
tools/litex_sim: minor review cleanup.
2020-10-01 10:36:37 +02:00
23e319732c
tools/litex_server: minor review cleanup.
2020-10-01 10:35:11 +02:00
e8c0360fa5
tools/{litex_sim, litex_server}.py: Minor clean-up ( #657 )
...
Enable litex_server debug and create function to add for litex_sim args.
2020-10-01 10:32:44 +02:00
890ccaf4bd
support writing bitstream to flash
2020-10-01 08:39:32 +02:00
29bff18e69
software/liblitedram: add SDRAM CL/CWL printf to BIOS.
2020-09-30 19:00:12 +02:00
f476b32ada
software/liblitedram: rename SDRAM_TEST_SIZE to MEMTEST_DATA_SIZE (since used in benchs to force test size).
2020-09-30 18:34:48 +02:00
f7e49cc23a
software/liblitedram: add SDRAM_TEST_SIZE (2MiB as previously defined in memtest).
2020-09-30 18:02:07 +02:00
fdf7981f40
software/libbase/memtest: remove size restriction and don't execute memspeed.
2020-09-30 17:49:51 +02:00
ed21c983cb
Merge branch 'master' of http://github.com/enjoy-digital/litex
2020-09-30 17:29:04 +02:00
c154f1cbb2
software/liblitedram: add support for dynamic read/write phase and add command to BIOS to force them.
2020-09-30 17:09:19 +02:00
6f136f9faa
Merge pull request #655 from betrusted-io/svd_memregion
...
add memory regions to soc.svd
2020-09-30 11:43:14 +02:00
96976941b4
Merge pull request #656 from kbeckmann/fix_sdram_leveling
...
Fix build issue where sdram_leveling is not found
2020-09-30 09:57:54 +02:00
39d144626b
Fix build issue where sdram_leveling is not found
...
4f76656
2020-09-29 22:49:41 +02:00
a9234a8793
software/liblitedram: allow cmd_delay adjustment even when enforced by the phy.
2020-09-29 16:02:21 +02:00
eca5a25e27
add dummy attr_translate
2020-09-29 15:55:07 +02:00
4f76656018
software/liblitedram: simplify vtc/hardware/software controls.
...
- move vtc control to sdram_software_control_on/off.
- remove sdram_calibration (duplicate of sdram_leveling).
- be sure to call sdram_software_control_on/off before all litedram bios commands.
2020-09-29 15:40:26 +02:00
dd2b1f21f0
typo and dead code
2020-09-29 15:24:36 +02:00
e4555df095
tools/litex_server/pcie: enable pcie device if not already enabledd.
...
Avoid having to do it manually or through a driver.
2020-09-29 13:38:19 +02:00
bc5873f78c
tools/litex_server/pcie: allow passing pcie bar as reported by lspci.
...
ex:
$lspci
[...]
06:00.0 RF controller: Xilinx Corporation Device 7022 (rev 01)
sudo litex_server --pcie --pcie-bar=06:00.0
2020-09-29 13:10:05 +02:00
6d07f01f5b
tools/litex_client/RemoteClient: allow use without local csr.csv file.
...
In some case, we just want to access MMAP manually without having the csr.csv file:
wb = RemoteClient()
wb.open()
wb.read(0x40000000)
wb.close()
2020-09-29 13:01:44 +02:00
7b42992383
add <memoryRegions> outer tag to series of <memoryRegion> for future proofing
2020-09-29 14:11:55 +08:00
4a94bb78f6
add memory regions to soc.svd
...
svd2rust does not recognize memory regions, but we'd like to
make an access crate for Rust that does.
This patch adds memory regions to soc.svd using the "vendorExtensions"
tag, as specified in https://www.keil.com/pack/doc/cmsis/SVD/html/svd_Format_pg.html
The vendorExtensions is added as a block after the Peripherals level, and has a format
like this:
```xml
<memoryRegion>
<name>SRAM</name>
<baseAddress>0x10000000</baseAddress>
<size>0x00020000</size>
</memoryRegion>
<memoryRegion>
<name>VEXRISCV_DEBUG</name>
<baseAddress>0xEFFF0000</baseAddress>
<size>0x00000100</size>
</memoryRegion>
<memoryRegion>
<name>CSR</name>
<baseAddress>0xF0000000</baseAddress>
<size>0x00040000</size>
</memoryRegion>
```
2020-09-29 01:30:09 +08:00
95564b7475
change name->devicename, working bios
2020-09-28 17:49:41 +02:00
c0fa4fd1f4
initial build support for Gowin
2020-09-28 13:12:07 +02:00
a1c023b900
software/bios/cmds/cmd_litedram: enable sdram_software_control before sdram_mode_register_write.
2020-09-24 14:58:42 +02:00
Florent Kermarrec
Gabriel Somlo
Stephane Gourichon
Robert Winkler
Michael Betz
Shawn Anastasio
Vamsi Vytla
Pepijn de Vos
Konrad Beckmann
bunnie