b95965de73
cores/code_8b10b: set reset_less to True on datapath signals.
...
Reset is only required on control signals.
2020-04-06 11:35:18 +02:00
a35df4f7d1
stream: set reset_less to True on datapath signals.
...
Reset is only required on control signals.
2020-04-06 11:33:49 +02:00
cf1c5d99b3
Merge pull request #448 from kessam/patch-1
...
Fix timing constraints
2020-04-06 11:12:12 +02:00
fb532f5e92
Fix timing constraints
2020-04-05 17:56:29 +02:00
6043108376
soc/cores/clock/ECP5PLL: add CLKI_DIV support.
2020-04-03 11:14:57 +02:00
27f00851d0
Merge pull request #447 from antmicro/spi-xip
...
Add initial support for the new LiteSPI core
2020-04-01 16:51:29 +02:00
81be74a7b1
targets: netv2: add LiteSPI
2020-04-01 16:20:36 +02:00
946cb16429
platform: netv2: update SPI flash pinout
2020-04-01 16:20:36 +02:00
31fceb0a10
litex_sim: add LiteSPI
2020-04-01 16:20:36 +02:00
91981b960c
soc/cores/uart: use reset_less on accumulator, reg, bitcount to reduce.
...
This reduces logic a bit. It does not make large difference on usual design with
only 1 UART, but is interesting on designs with hundreds of UARTs used to "document"
FPGA boards :) (similar to https://github.com/enjoy-digital/camlink_4k/blob/master/ios_stream.py )
2020-03-31 16:54:38 +02:00
87160059d3
soc/cores/spi_flash: add ECP5SPIFlash (non-memory-mapped).
2020-03-31 16:17:12 +02:00
ff04869c62
litex_setup: add litespi core
2020-03-30 13:43:45 +02:00
e3445f6cd9
Merge pull request #444 from ilya-epifanov/openocd-jtag-programmer
...
Added openocd jtagspi programmer, to be used with ECP5-EVN board
2020-03-28 12:58:08 +01:00
aeb9411ae1
Merge pull request #441 from gsomlo/gls-spisdcard-fixes
...
SPI SDCard fixes and features
2020-03-28 12:50:17 +01:00
351551a041
Added openocd jtagspi programmer, to be used with ECP5-EVN board
2020-03-28 11:20:30 +01:00
8473ed567a
software/bios: add spisdcardboot() to boot_sequence()
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-27 15:24:09 -04:00
e9054ef65a
software/libbase/spisdcard: add delay to goidle loop
...
In `spi_sdcard_goidle()`, insert a `busy_wait()` into the CMD55+ACMD41
loop to avoid exhausting the retry counter before the card has a chance
to be ready (required on the trellisboard, also tested OK on nexys4ddr).
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-27 15:24:09 -04:00
c6b6dee2e7
software/bios: factor out busy_wait() function
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-27 15:24:09 -04:00
540218b2d8
software/libbase/spisdcard: fix width of address parameter
...
Host address parameter types should match CPU word width, so
use `unsigned long` to be correct on both 32 and 64 bit CPUs.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-27 15:24:09 -04:00
2e48ab568b
soc/cores/spi: make dynamic clk divider optional (can be enabled with add_clk_divider method) and only use it in add_spi_sdcard.
2020-03-27 18:44:48 +01:00
86eec1a413
Merge pull request #439 from antmicro/fix-compiler-rt
...
Update removed llvm compiler-rt repo
2020-03-26 15:36:39 +01:00
5fa2cc6624
Update removed llvm compiler-rt repo
2020-03-26 10:56:28 +01:00
4abb3715d9
targets/add_constant: avoid specifying value when value is None (=default).
2020-03-26 09:45:19 +01:00
73b4347587
software/libbase/spisdcard: add USE_SPISDCARD_RECLOCKING define to easily disable reclocking.
2020-03-26 07:46:32 +01:00
b509df8bb6
integration/soc/add_uart: add USB CDC support (with ValentyUSB core).
2020-03-25 19:07:06 +01:00
76872a7afb
tools/litex_sim: simplify using uart_name=sim.
2020-03-25 19:06:37 +01:00
09a3ce0ee5
integration/soc/add_uart: add Model/Sim.
2020-03-25 18:56:58 +01:00
3f43c6a223
integration/soc/add_uart: cleanup.
2020-03-25 18:54:29 +01:00
5bcf730c77
build/tools: add replace_in_file function.
2020-03-25 16:36:53 +01:00
ffe83ef0f3
tools/litex_term: use 64 bytes as default payload_lengh (work for all confniguration) and add small delay between frames for FT245 FIFO.
...
The delay still need to be investigated.
2020-03-25 09:31:51 +01:00
8f2e36927d
bios/boot: update comments.
2020-03-25 09:21:28 +01:00
1746b57a1b
Merge pull request #437 from feliks-montez/bugfix/fix-serialboot-frames
...
flush rx buffer when bad crc and fix frame payload length
2020-03-25 09:18:31 +01:00
c154d8d2fc
test/test_targets: remove versa_ecp3.
2020-03-25 08:47:43 +01:00
8d999081e3
boards/targets: update SDRAM to use new GENSDRPHY and new ECP5PLL phase support.
2020-03-24 20:04:18 +01:00
3eb08c7dd8
boards/platforms: remove versa_ecp3 (ECP3 no longer supported).
2020-03-24 20:02:57 +01:00
eb64169521
build/lattice/diamond: remove ECP3 support. (ECP3 is not used and no longer interesting now that ECP5 has an open-source toolchain).
2020-03-24 19:36:57 +01:00
bba5f1828b
cores/clock/ECP5PLL: add phase support.
2020-03-24 19:09:05 +01:00
0123ccc893
build/lattice/common: change LatticeECPXDDROutputImpl from ECP3 to ECP5.
2020-03-24 19:08:38 +01:00
5a402264d0
Fix off-by-one error on almost full condition for prefetch
...
This causes a DRC error on the Xilinx tools when the prefetch
lines setting is 1. Don't know why this wasn't caught earlier,
but it just popped up in CI.
2020-03-24 08:04:35 +01:00
ebdc38fc91
flush rx buffer when bad crc and fix frame payload length
2020-03-23 23:04:36 -04:00
d62ef38c4b
soc/doc/csr: allow CSRField.reset to be a Migen Constant.
2020-03-23 18:47:41 +01:00
4adac90d88
cpu/vexriscv/mem_map_linux: move main_ram to allow up to 1GB.
2020-03-23 15:35:33 +01:00
63ab2ba40c
software/bios/boot/linux: move emulator.bin to main_ram and allow defining custom ram offsets.
2020-03-23 15:06:32 +01:00
d998475498
targets: remove Etherbone imports.
2020-03-21 21:39:34 +01:00
3b04efbcae
targets: switch to add_etherbone method.
2020-03-21 19:55:00 +01:00
5ad7a3b7df
integration/soc: add add_etherbone method.
2020-03-21 19:54:36 +01:00
d6b0819e4c
integration/soc/add_ethernet: add name parameter (defaults to ethmac).
2020-03-21 19:36:31 +01:00
930679efd7
targets: always use sys_clk_freq on SDRAM modules.
2020-03-21 19:36:06 +01:00
ae6ef923af
targets: fix typos in previous changes.
2020-03-21 18:26:58 +01:00
c547b2cc29
Merge pull request #436 from rob-ng15/master
...
Reclock spi sdcard access after initialisation
2020-03-21 09:26:25 +01:00
Florent Kermarrec
kessam
Piotr Binkowski
Ilya Epifanov
Gabriel Somlo
Kamil Rakoczy
bunnie
Feliks