d47917e480
simplify and clean up
2014-09-30 00:50:03 +02:00
0791b9e2e4
sim working
2014-09-29 17:12:02 +02:00
b47153fbfa
fix alignment (still some transmissions errors --> need to check clocks and resets)
2014-09-29 15:37:35 +02:00
15f67b30d0
genlib/fsm: make first fsm.act() the reset state, even when using after_*/before_* methods before fsm.act
2014-09-29 19:38:58 +08:00
ed752758b0
fix and simplify ctrl fsms, OOB OK, align KO
2014-09-27 17:45:46 +02:00
2f769e4e4e
gtx: add resynchronization on control signals
2014-09-27 17:26:05 +02:00
f23c5aa724
mmcm: configure default divider with default_speed
2014-09-27 16:22:40 +02:00
45f7f8aff5
add tx_reset_fsm and rx_reset_fsm
2014-09-27 16:10:39 +02:00
c27f24c4c0
reorganize code
...
- use sys_clk of 166.66MHz and using it instead of sata clk.
- rename clocking to CRG since it also handles resets.
- create datapath and move code from gtx.
2014-09-27 15:34:28 +02:00
879478a6e4
clocking: clean up and add comments
2014-09-27 13:33:43 +02:00
387cf90cf8
host and device communicate with OOB, now need to fix ctrl
2014-09-26 23:30:30 +02:00
01da43ecb2
reset and lock of PLL OK. We see OOB signals on the link but they are not decoded by the device.
2014-09-26 22:31:32 +02:00
dfbec91a62
add modelsim simulation and start fixing init
2014-09-26 17:05:05 +02:00
e03091e7e2
add generic CRCEngine, CRC32, CRCInserter and CRCChecker
...
CRCEngine implements a generic and optimized CRC LFSR. It will enable generation of CRC generators and checkers.
CRC32 is an implementation of IEEE 802.3 CRC using the CRCEngine.
CRC32Inserter and CRC32Checker have been tested on an ethernet MAC.
2014-09-26 11:42:10 +08:00
c1fc0b9c97
update README with new Kintex-7 support
2014-09-26 10:36:29 +08:00
13fb9282db
targets: add simple design (vendor agnostic and usable on all platforms with UART pins).
...
Designing a SoC with Migen is easy, but we have to provide a very simple design that can
be used on all boards with only 1 clock and 2 UARTs pins defined. This will encourage the
newcomer to invest time in Migen/MiSoC and see its real potential.
2014-09-26 10:35:15 +08:00
1d053bd7ee
modify TestDesign to be able to simulate phy with host <--> device loopback
2014-09-25 15:37:49 +02:00
7e14c4fc51
move some logic outside of GTX
2014-09-25 15:23:56 +02:00
c008dfdd98
clean up (thanks to Sebastien)
2014-09-25 14:17:25 +02:00
111f527647
do some clean up
2014-09-24 22:26:33 +02:00
2fb418a373
use new MiSoC UART with phase accumulators
...
this will allow to speed up MiLa reads
2014-09-24 21:56:15 +02:00
435bc22fa0
integrate phy in test design and start fix syntax errors
2014-09-24 16:07:34 +02:00
18009303ae
instanciate device or host controller
2014-09-24 14:00:00 +02:00
60324295fa
manage clock domain crossing and data width conversion in gtx
2014-09-24 13:56:12 +02:00
f436069a04
create sata clock (sata_tx/2 for a 32 bits data path)
2014-09-24 13:55:06 +02:00
7790105913
realign rxdata / rxcharisk directly in gtx
2014-09-24 12:13:43 +02:00
f74471d027
add device ctrl skeleton (we will use it for simulation with the host)
2014-09-24 11:37:28 +02:00
d78cae1b57
more ctrl skeleton
2014-09-24 11:07:36 +02:00
71bfd036d0
add ctrl skeleton
2014-09-24 00:01:01 +02:00
fa509b3365
rearrange code and remove datapath for now
2014-09-23 23:03:32 +02:00
22ea5b08b0
clean up and add K7SATAGTXReconfig skeleton (empty but we don't need it for now)
2014-09-23 22:40:01 +02:00
674e0b3581
remove GTXE2_COMMON (we use in fact CPLL and not QPLL, GTXE2_COMMON was here in design just because of an old ISE bug)
...
(see http://www.xilinx.com/support/answers/45410.html for more information)
2014-09-23 22:17:08 +02:00
e0fd313ce0
add data path from another design (need to be adapted to SATA specification)
2014-09-23 17:36:11 +02:00
d55db1688b
add SATAGTX with RX/TX clocking and reset (no DRP for now)
2014-09-23 17:18:03 +02:00
410f250d2a
software: remove setjmp
2014-09-23 21:57:05 +08:00
cbbbf8de8b
add dict for fbdiv computation on GTXE2_COMMON
2014-09-23 14:11:14 +02:00
4aff15bb74
create k7satagtx.py and move GTXE2 primitive inside
2014-09-23 14:03:51 +02:00
7422b94f90
create GTXE2_CHANNEL & GTXE2_COMMON class / add IO signals and parameters
2014-09-23 13:57:02 +02:00
1a5a2d10e3
fill GTXE2_COMMON constants parameters and signals for SATA / disconnect unused output ports
2014-09-23 12:01:57 +02:00
fc64b44391
fill GTXE2_CHANNEL constants parameters and signals for SATA / disconnect unused output ports
2014-09-23 11:54:36 +02:00
ac8d8783cf
k7sataphy: add GTXE2_COMMON instance skeleton
2014-09-23 10:23:54 +02:00
bdf038f241
k7sataphy: add GTXE2_CHANNEL instance skeleton
2014-09-23 10:08:17 +02:00
a03570ccca
flow/actor: fix eop direction
2014-09-23 00:14:58 +08:00
66054af7bb
flow/actor: add packetized parameter for Sink and Source
2014-09-22 23:45:28 +08:00
967b73bef3
actorlib/structuring: add reverse parameter to Unpack and Pack
2014-09-22 23:41:40 +08:00
7e31ef2152
init with repo with simple TestDesign
2014-09-22 13:36:43 +02:00
14d53526be
libbase: use __builtin_setjmp and __builtin_longjmp
2014-09-21 17:43:17 +08:00
6c9810532b
genlib/fifo/SyncFIFOBuffered: replace not supported
2014-09-17 19:59:13 +08:00
4cacf97088
genlib/fifo: same 'level' semantics between SyncFIFOBuffered and FWFT SyncFIFO
2014-09-17 19:58:43 +08:00
503a2f00b5
mor1kx: sync
2014-09-12 16:00:32 +08:00
Florent Kermarrec
Sebastien Bourdeauducq