Florent Kermarrec
|
200791c81d
|
uart: generate ack for rx (serialboot OK with sim)
|
2015-03-04 00:57:37 +01:00 |
|
Florent Kermarrec
|
7c058a52c9
|
com/spi: use .format in tb
|
2015-03-03 10:44:05 +01:00 |
|
Florent Kermarrec
|
0716dadaf2
|
targets: keep the SPI flash core even if with_rom is enabled, so that flash booting in the BIOS still works
|
2015-03-03 10:39:31 +01:00 |
|
Florent Kermarrec
|
1d4dc45436
|
LiteXXX cores: use format in prints
|
2015-03-03 10:29:28 +01:00 |
|
Florent Kermarrec
|
f27e7a4b22
|
litesata: remove unneeded clock constraint
|
2015-03-03 10:24:05 +01:00 |
|
Florent Kermarrec
|
0bcd6daf63
|
soc: remove is_sim function
|
2015-03-03 10:15:11 +01:00 |
|
Florent Kermarrec
|
905be50451
|
sdram: move lasmibus to core, rename crossbar to lasmixbar and move it to core, move dfi to phy
|
2015-03-03 09:55:25 +01:00 |
|
Florent Kermarrec
|
9210272356
|
sdram: pass phy_settings to LASMIcon, MiniCON and init_sequence
|
2015-03-03 09:23:21 +01:00 |
|
Florent Kermarrec
|
2f7206b386
|
sdram: revert use of scalar values for DFIInjector
|
2015-03-03 09:09:54 +01:00 |
|
Florent Kermarrec
|
9df60bf98e
|
lasmicon: better management of optional bandwidth module (automatically inserted by -Ot with_memtest True)
|
2015-03-03 09:02:53 +01:00 |
Sebastien Bourdeauducq
|
ff29c86fe1
|
litesata/kc705: use FMC pin names
|
2015-03-03 01:02:50 +00:00 |
|
Sebastien Bourdeauducq
|
8e48502d03
|
spiflash: style
|
2015-03-03 00:54:30 +00:00 |
|
Sebastien Bourdeauducq
|
2513833a24
|
README: 80 columns
|
2015-03-03 00:17:34 +00:00 |
|
Sebastien Bourdeauducq
|
69a0c597ad
|
make.py: use ternary getattr
|
2015-03-02 23:54:00 +00:00 |
|
Florent Kermarrec
|
410a162841
|
sdram: disable by default bandwidth_measurement on lasmicon
|
2015-03-02 19:53:16 +01:00 |
|
Florent Kermarrec
|
ca42611b6b
|
README: add Pipistrello
|
2015-03-02 19:18:46 +01:00 |
|
Florent Kermarrec
|
3449b7c933
|
update README
|
2015-03-02 18:41:03 +01:00 |
|
Florent Kermarrec
|
02ef1dc95a
|
targets: fix mlabs_video FramebufferSoC
|
2015-03-02 18:38:43 +01:00 |
|
Florent Kermarrec
|
473997df26
|
cpuif: add CSR_ prefix to CSR base addresses (avoid conflicts between CSR and mems bases)
|
2015-03-02 16:52:17 +01:00 |
|
Florent Kermarrec
|
8280acd3a7
|
sdram: only keep frontend logic and sdram core declaration in soc/sdram.py, move other logic to sdram/core
|
2015-03-02 12:17:49 +01:00 |
|
Florent Kermarrec
|
3465db25a7
|
soc/sdram: be more generic in naming
|
2015-03-02 11:55:28 +01:00 |
|
Florent Kermarrec
|
97331153e0
|
sdram: create core dir and move lasmicon/minicon in it
|
2015-03-02 11:38:22 +01:00 |
|
Florent Kermarrec
|
de698c51e4
|
sdram: rename self.phy_settings to self.settings (using phy.settings instead of phy.phy_settings seems cleaner)
|
2015-03-02 11:29:43 +01:00 |
|
Florent Kermarrec
|
6b24562eea
|
sdram: reintroduce dat_ack change (it was a small issue on wishbone writes (sending data 1 clock cycle too late) that was not detected by memtest)
|
2015-03-02 10:59:43 +01:00 |
|
Florent Kermarrec
|
0980becb56
|
sdram: improve memtest by adding 2 different writes/reads
doing only a write and read is not enough: if we reloaded a fpga with write that is not working after functional fpga, it would not trigger an error.
|
2015-03-02 10:52:22 +01:00 |
|
Florent Kermarrec
|
46020fd253
|
sdram: for now revert dat_ack change (it seems there is an small issue, will have a closer look)
|
2015-03-02 10:34:29 +01:00 |
|
Florent Kermarrec
|
c0b38e4905
|
sdram/lasmicon: create a separate file for the crossbar and remove it from lasmibus
|
2015-03-02 09:18:32 +01:00 |
|
Florent Kermarrec
|
7300879b7f
|
sdram: move dfii to phy
|
2015-03-02 09:08:28 +01:00 |
|
Florent Kermarrec
|
9ad05b21ca
|
sdram: fix remaining data_valid in dma_lasmi
|
2015-03-02 09:05:18 +01:00 |
|
Florent Kermarrec
|
88e7fa21e4
|
sdram: create test dir and move lasmicon/minicon tests to it
|
2015-03-02 08:42:55 +01:00 |
|
Florent Kermarrec
|
b305b7828a
|
sdram: create frontend dir and move dma_lasmi/memtest/wishbone2lasmi to it
|
2015-03-02 08:36:39 +01:00 |
|
Florent Kermarrec
|
6d83a112e6
|
lasmi: simplify usage for the user (it's the job of the controller to manage write/read latencies on acks)
|
2015-03-01 22:04:27 +01:00 |
|
Florent Kermarrec
|
f58394f6af
|
soc: add initial verilator sim support: ./make.py -t simple -p sim build-bitstream :)
|
2015-03-01 18:25:47 +01:00 |
|
Florent Kermarrec
|
4f37d29d05
|
flash/spi: make bitbang optional (enabled by default)
|
2015-03-01 17:15:22 +01:00 |
|
Florent Kermarrec
|
096e95cb59
|
uart: use data instead of d on endpoint's layouts (coherency with others cores)
|
2015-03-01 16:56:48 +01:00 |
|
Florent Kermarrec
|
1e6d1deae8
|
uart: add sim phy
|
2015-03-01 16:52:50 +01:00 |
|
Florent Kermarrec
|
649cdeb265
|
liteXXX cores: use new uart and import FlipFlop/Counter/Timeout from Migen
|
2015-03-01 16:48:41 +01:00 |
|
Florent Kermarrec
|
bd4d3cd73b
|
uart: create phy directory and move phy logic to serial.py (will enable selecting uart phy, for example virtual uart with LiteEth or sim model for Verilator)
|
2015-03-01 12:14:34 +01:00 |
|
Florent Kermarrec
|
9e01bf5fdd
|
litesata: create example design derived from SoC
|
2015-03-01 11:33:38 +01:00 |
|
Florent Kermarrec
|
c21a7956c8
|
liteXXX cores: remove Identifier duplication
|
2015-03-01 11:24:58 +01:00 |
|
Florent Kermarrec
|
67ca0da1d9
|
liteXXX cores: share same methodology for on-board tests
|
2015-03-01 11:21:12 +01:00 |
|
Florent Kermarrec
|
7b464b2b1c
|
litesata: create specialized kc705 platform to avoid duplicating things already in mibuild
|
2015-03-01 11:03:15 +01:00 |
|
Florent Kermarrec
|
32fce11edf
|
litescope: avoid uart code duplication
|
2015-03-01 10:07:55 +01:00 |
|
Florent Kermarrec
|
1b7f8d0439
|
video: reintegrate dvisampler from mixxeo (DVI/HDMI interfaces are common in today's SoCs)
|
2015-03-01 10:07:52 +01:00 |
Robert Jordens
|
93b80b2f1c
|
pipistrello: fix lpddr parameters, crg, flash, style
|
2015-02-28 16:17:34 -07:00 |
|
Florent Kermarrec
|
144ee7ea9f
|
soc: fix register_rom
|
2015-02-28 23:51:51 +01:00 |
|
Florent Kermarrec
|
b32a0e6f9e
|
liteeth: create example design derived from SoC that can be used on all targets with Ethernet pins
|
2015-02-28 23:33:00 +01:00 |
|
Florent Kermarrec
|
b34be816ec
|
liteXXX cores: remove setup.py and relative paths (we will install misolib of use PYTHON_PATH)
|
2015-02-28 22:23:48 +01:00 |
|
Florent Kermarrec
|
5c43d4d091
|
litescope: create example design derived from SoC that can be used on all targets
|
2015-02-28 22:19:24 +01:00 |
|
Florent Kermarrec
|
0fd1b9df8d
|
liteXXX cores: remove redefinition of get_csr_csv
|
2015-02-28 21:45:05 +01:00 |