930679efd7
targets: always use sys_clk_freq on SDRAM modules.
2020-03-21 19:36:06 +01:00
ae6ef923af
targets: fix typos in previous changes.
2020-03-21 18:26:58 +01:00
c547b2cc29
Merge pull request #436 from rob-ng15/master
...
Reclock spi sdcard access after initialisation
2020-03-21 09:26:25 +01:00
011773af8d
Merge pull request #435 from enjoy-digital/spi_master_clk_divider
...
soc/core/spi: add Clk Divider CSR (defaults to sys_clk_freq/spi_clk_f…
2020-03-21 09:25:37 +01:00
2bf31a31da
Reclock spi sdcard access after initialisation
...
Depends upon https://github.com/enjoy-digital/litex/pull/435
After initialising the card, reclock the card, aiming for ~16MHz (divider is rounded up, as slower speed is safer), but a maximum of half of the processor speed.
Tested with the card being clocked to 12.5MHz on de10nano
2020-03-21 07:37:21 +00:00
f03d862c06
targets: switch to add_ethernet method instead of EthernetSoC.
2020-03-20 23:46:15 +01:00
4e9a8ffe9c
targets: switch to SoCCore/add_sdram instead of SoCSDRAM.
2020-03-20 22:02:36 +01:00
61c9e54a90
soc/core/spi: add Clk Divider CSR (defaults to sys_clk_freq/spi_clk_freq).
2020-03-20 19:49:42 +01:00
dd7718b4fe
targets/arty: use new ISERDESE2 MEMORY mode.
2020-03-20 18:58:31 +01:00
fca52d110d
Merge branch 'master' of http://github.com/enjoy-digital/litex
2020-03-20 18:54:51 +01:00
0f35664839
Merge pull request #434 from rob-ng15/master
...
Use <stdint.h> to provide structure sizes
2020-03-20 18:05:21 +01:00
f3c233776e
Use <stdint.h> to provide structure sizes
2020-03-20 11:35:05 +00:00
c2ebbcbf6c
Use <stdint.h> for structure sizes
2020-03-20 11:34:24 +00:00
ccf7363932
integration/soc: add add_spi_flash method to add SPI Flash support to the SoC.
2020-03-20 10:24:31 +01:00
ec3e068669
targets/nexys4ddr: use LiteXSoC's add_spi_sdcard method.
2020-03-20 09:58:09 +01:00
d276036f24
integration/soc: add add_spi_sdcard method to add SPI mode SDCard support to the SoC.
2020-03-20 09:57:37 +01:00
6044570928
Merge pull request #433 from gsomlo/gls-rocket-spisdcard
...
Support SPI-mode SDCard booting on Litex+Rocket (64bit) configuration
2020-03-20 09:41:56 +01:00
b960d7c574
targets/nexys4ddr: add '--with-spi-sdcard' build option
2020-03-19 21:51:44 -04:00
7a7b8905b7
platforms/nexys4ddr: add spisdcard pins.
...
Synchronize with litex-boards commit #57bcadb.
2020-03-19 21:51:44 -04:00
af4de03fad
targets/nexys4ddr: make sdcard reset conditional
2020-03-19 21:51:44 -04:00
a33916bc6b
software/libbase/spisdcard: fix 4-byte FAT fields on 64-bit CPUs
...
On 64-bit architectures (e.g., Rocket), 'unsigned long' means
eight (not four) bytes. Use 'unsigned int' wherever a FAT data
structure requires a four-byte field!
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 21:51:44 -04:00
fbadfa1764
Merge pull request #432 from esden/csr-doc-fix-int
...
Don't let python convert lane number to float.
2020-03-20 09:20:02 +08:00
279886721b
Don't let python convert lane number to float.
...
While at it also:
* Don't multilane for reg >= 8 bit width.
* Only check if we should switch to multilane after finding min field width.
2020-03-19 18:12:41 -07:00
1f90abea8e
bios: make SPI SDCard boot configs other than linux-on-litex-vexriscv
...
When NOT on linux-on-litex-vexriscv, we load 'boot.bin' to MAIN_RAM_BASE,
and jump to it.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-19 19:37:47 -04:00
c2938dc973
bios/boot.c: cosmetic: re-indent spisdcardboot() for consistency
2020-03-19 19:37:47 -04:00
dd07a0ad2f
Merge pull request #431 from antmicro/hybrid-mac
...
litex_sim: add support for hybrid mac
2020-03-19 22:10:33 +01:00
37f25ed37a
software/libbase/bios: rename spi.c/h to spisdcard.h, also rename functions.
2020-03-19 11:02:15 +01:00
939256340f
software/bios/main: revert USDDRPHY_DEBUG (merge issue with SPI SD CARD PR).
2020-03-19 10:47:28 +01:00
8fe9e72f7b
Merge pull request #429 from rob-ng15/master
...
SPI hardware bitbanging from SD CARD
2020-03-19 10:41:09 +01:00
96a265a408
litex_sim: add support for hybrid mac
2020-03-19 10:04:08 +01:00
9e1cd84296
Merge pull request #430 from gsomlo/gls-sdclk-stub
...
bios/sdcard: provide sdclk_set_clk() stub for clocker-less targets
2020-03-19 09:05:02 +01:00
b2103f4ad8
bios/sdcard: provide sdclk_set_clk() stub for clocker-less targets
...
Targets which lack an adjustable clocker will not expose the required
registers. Provide a stub sdclk_set_clk() routine for those situations.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-03-18 15:11:23 -04:00
e865162904
platforms/kcu105: fix pcie tx0 p/n swap.
2020-03-18 19:05:54 +01:00
27720409ce
SPI hardware bitbanging from SD CARD
2020-03-17 09:51:11 +00:00
d45dda731a
SPI hardware bitbanging from SD CARD
2020-03-17 09:50:45 +00:00
50b6db6a6b
SPI hardware bitbanging from SD CARD
2020-03-17 09:50:16 +00:00
2c4b89639f
soc/cores/clock: make sure specific clkoutn_divide_range is only used as a fallback solution.
2020-03-16 11:44:39 +01:00
536ae0e619
Merge pull request #425 from esden/csr-cod-split-reg
...
Make CSR documentation diagrams, with more than 8 bits, be split into multiple lanes.
2020-03-14 18:08:24 +08:00
57576fa8fc
Add bit more logic to decide when to switch to multilane CSR documentation.
...
Now we only generate multilane bitfield documentation when the CSR has
fields, and the smallest field is less than 8bit long. As this is when
we start running into space problems with the field names.
2020-03-13 14:48:56 -07:00
dda7a8c5f3
Split CSR documentation diagrams with more than 8 bits into multiple lanes.
...
In cases when each CSR bit has a name and we use CSR with more than 8
bits, the register diagram quickly becomes crowded and hard to read.
With this patch we split the register into multiple lanes of 8 bits
each.
2020-03-13 14:48:23 -07:00
c0f067c3cf
Merge pull request #427 from enjoy-digital/s7mmcm_fractional_divide
...
cores/clock: simplify Fractional Divide support on S7MMCM.
2020-03-13 18:06:23 +01:00
aec1bfbeb4
cores/clock: simplify Fractional Divide support on S7MMCM.
...
Specific clkoutn_divide_range can now be provided by specialized XilinxClocking classes.
When provided, the specific range will be used. Floats are also now supported in the
range definition/iteration.
2020-03-13 15:56:39 +01:00
f34593a17d
Merge pull request #421 from betrusted-io/clk0_fractional
...
add fractional division options to clk0 config on PLL
2020-03-13 14:15:24 +01:00
eb9f54b2bc
test: add initial (minimal) test for clock abstraction modules.
...
Also fix divclk_divide_range on S6DCM.
2020-03-13 12:38:23 +01:00
c304c4db27
targets/icebreaker: add description of the board, link to crowdsupply campagin and to the more complete example.
2020-03-13 09:37:42 +01:00
b5bddc2332
Merge pull request #426 from esden/update-wavedrom
...
Updating the vendored wavedrom js files.
2020-03-13 13:44:13 +08:00
d063acb767
Updating the vendored wavedrom js files.
2020-03-12 22:35:04 -07:00
a27385a79c
soc/intergration: rename mr_memory_x parameter to memory_x.
2020-03-12 12:20:48 +01:00
d5da9e0df4
Merge pull request #424 from esden/generate-memory-x
...
Add --mr-memory-x parameter to generate memory regions memory.x file
2020-03-12 12:12:48 +01:00
4d02263223
Add --mr-memory-x parameter to generate memory regions memory.x file.
...
This file is used by rust embedded target pacs.
2020-03-11 18:12:18 -07:00
Florent Kermarrec
rob-ng15
Gabriel Somlo
Sean Cross
Piotr Esden-Tempski
Piotr Binkowski