e47f84ea79
Unconditionally ask dfu-util to "Issue USB Reset signalling once we're finished".
...
Some host machines need it.
If issuing -R always does not cause any trouble, then do it.
2020-10-05 17:16:10 +02:00
a9234a8793
software/liblitedram: allow cmd_delay adjustment even when enforced by the phy.
2020-09-29 16:02:21 +02:00
4f76656018
software/liblitedram: simplify vtc/hardware/software controls.
...
- move vtc control to sdram_software_control_on/off.
- remove sdram_calibration (duplicate of sdram_leveling).
- be sure to call sdram_software_control_on/off before all litedram bios commands.
2020-09-29 15:40:26 +02:00
e4555df095
tools/litex_server/pcie: enable pcie device if not already enabledd.
...
Avoid having to do it manually or through a driver.
2020-09-29 13:38:19 +02:00
bc5873f78c
tools/litex_server/pcie: allow passing pcie bar as reported by lspci.
...
ex:
$lspci
[...]
06:00.0 RF controller: Xilinx Corporation Device 7022 (rev 01)
sudo litex_server --pcie --pcie-bar=06:00.0
2020-09-29 13:10:05 +02:00
6d07f01f5b
tools/litex_client/RemoteClient: allow use without local csr.csv file.
...
In some case, we just want to access MMAP manually without having the csr.csv file:
wb = RemoteClient()
wb.open()
wb.read(0x40000000)
wb.close()
2020-09-29 13:01:44 +02:00
a1c023b900
software/bios/cmds/cmd_litedram: enable sdram_software_control before sdram_mode_register_write.
2020-09-24 14:58:42 +02:00
90a2b80b6a
software/liblitedram/sdram_write_leveling_rst_cmd_delay: fix printf location (do it before taps is decremented).
2020-09-24 13:54:08 +02:00
7617a82fe6
targets/kcu105: create specific cd_eth for ethernet.
2020-09-24 10:27:48 +02:00
a3c616028e
software/liblitedram/sdram: fix cmd_delays -> dat_delays.
2020-09-23 19:43:28 +02:00
01528e643e
Merge pull request #652 from gsomlo/gls-sdcard-clocking
...
RFC: proper way to set sdcard clock?
2020-09-22 21:52:13 +02:00
8e7596d330
liblitesdcard/sdcard.c: ensure effective sdcard clock is <= requested
...
With the way the clock divider is currently calculated, it is
possible for the effective sdcard clock to end up *higher* than
the requested `clk_freq` value.
Calculate the divider starting with the `CONFIG_CLOCK_FREQUENCY/clk_freq`
ratio which is then rounded up to the nearest power-of-two, ensuring
that the resulting, effective clock frequency is <= to the requested
frequency.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-09-22 15:15:50 -04:00
ac32b92e9f
targets/kcu105: add etherbone.
2020-09-22 18:31:06 +02:00
a601415bf0
software/liblitedram: add functions/commands to reset and force cmd/dat write leveling delays.
...
Useful to investigate/speed-up new board support.
2020-09-21 19:53:34 +02:00
a39660fa99
software/liblitedram/sdram.c: fix typo.
2020-09-17 18:19:12 +02:00
a0d66dd60e
software/liblitesdcard/sdcard: move busy_wait in sdcard_wait_cmd_done (fixes sdcardboot being stuck since code refactoring) and reduce busy_wait value.
2020-09-17 10:52:21 +02:00
de4fc14cf9
software/bios/cmds/cmd_litsdcard: make sure all commands generate a report.
2020-09-17 10:41:49 +02:00
6c4abe2185
software/bios/cmds/cmd_liteeth: make sure all commands generate a report and improve it.
2020-09-17 09:10:58 +02:00
7d6818ab07
software/bios/command: avoid too much groups, reorganize a bit.
2020-09-17 09:07:36 +02:00
88ef2a330b
software/bios/cmds/cmd_litedram: rename spdread command to sdram_spd.
2020-09-16 22:48:32 +02:00
3380de4adf
software/bios/cmds/cmd_i2c: rename commands to i2c_xy.
2020-09-16 22:45:19 +02:00
79009f762d
software/bios/cmds/cmd_spiflash: rename commands to flash_xy.
2020-09-16 22:44:47 +02:00
cb55d7119c
software/bios/cmds/cmd_liteeth: rename commands to mdio_xy.
2020-09-16 22:39:56 +02:00
d5162a2a2b
software/bios/cmds: use _handler suffix on all cmds functions.
2020-09-16 22:37:46 +02:00
d4018b7ccf
software/bios/cmds/cmd_litesdcard: rename commands to sdcard_xy.
2020-09-16 22:32:27 +02:00
400bf13400
bios/cmds/cmd_mem: rename commands to mem_xy.
2020-09-16 22:25:33 +02:00
21cc7df2fa
software/bios/cmds/cmd_mem: remove debug cmds that shouldn't have been merged.
2020-09-16 21:18:37 +02:00
74fb086322
software/liblitedram: rename functions/commands and expose mode register write function to user.
2020-09-16 20:01:39 +02:00
dc087f948a
software/liblitedram/sdram: keep sdrwlon/sdrwloff private.
2020-09-16 11:56:39 +02:00
9c2975e8b4
software/liblitedram/sdram: remove low level manual controls of the DFI interface.
...
This was too low level and unused.
2020-09-16 11:22:15 +02:00
8a9d17c768
software/liblitedram/sdram.c: move sdrwl_delays definition to write_leveling section and add #ifdef on reinitialization.
2020-09-16 11:03:10 +02:00
f208a5db2c
Merge pull request #649 from gsomlo/gls-misc-fixup
...
misc. fixes for a few recent commits
2020-09-15 21:17:14 +02:00
9729d053eb
software/memtest: use "unsigned long" to represent pointers
2020-09-15 14:46:18 -04:00
6c838cedcd
libbase/sim_debug: wrap markers variables within appropriate #ifdef
2020-09-15 14:46:18 -04:00
e2719d4d71
fixup for e28e808c - don't define variable in .h file
2020-09-15 14:46:18 -04:00
a69273db50
boards/targets/arty: switch SDRAM to NETWORKING mode (interface_type no longer supported).
2020-09-15 19:59:20 +02:00
404104be21
software/liblitedram/sdram.c: increase ddrphy reset time.
2020-09-15 19:58:17 +02:00
cfe6f56572
software/liblitedram/sdram.c: improve reporting.
...
- ident sub-reports.
- avoid displaying software/hardware swich if set to previous value.
2020-09-15 19:41:20 +02:00
e63a40370e
software/libbase/memtest: improve reporting.
...
- indent sub-reports.
- report speed in MiB/s.
2020-09-15 19:37:09 +02:00
e28e808c24
software/liblitedram: allow forced write leveling delays, improve delay printf when failing.
2020-09-15 19:34:09 +02:00
1d63d66a09
software/libbase/memtest: improve memtest_data progress.
...
Add base/current tested address and current/total tested size.
ex:
Memtest at 0x40000000...
Write: 0x40000000-0x40200000 (2/2MiB)
Read: 0x40000000-0x40200000 (2/2MiB)
2020-09-14 11:51:16 +02:00
c169494793
litex_setup: detect and allow execution from a cloned LiteX repository.
...
Others dependencies will be installed alongside the Litex repository.
2020-09-10 13:19:34 +02:00
b39fea4ecb
software/liblitedram/write_level_scan: reset write delay even if not succeeding.
2020-09-07 18:53:31 +02:00
658f712001
software/liblitedram/write_level: add support for manual command delay.
...
Required on some configurations where automatic cmd/clk scan still has troubles.
2020-09-07 18:47:18 +02:00
5ee074f422
Merge pull request #642 from gsomlo/gls-sdcard-blk-vs-sec
...
RFC: bios/sdcard: use (512 byte) blocks as the smallest addressable data unit
2020-09-07 17:41:50 +02:00
c0fb3691e6
Merge pull request #647 from antmicro/jboc/sim-debug
...
Improve dynamic tracing support in the simulator
2020-09-07 16:46:37 +02:00
7c3fbf1d06
sim: improve tracing reset value and behaviour with sim_debug=False
2020-09-07 15:29:02 +02:00
3fd567c4c9
sim: additional simulation tracing and debugging tools
2020-09-07 15:28:26 +02:00
c247814ed4
software/liblitedram/sdram.c: add ifdef on MPR functions.
2020-09-05 11:37:07 +02:00
f7b6dd05ae
cores/clock: add initial Xilinx Ultrascale Plus PLL/MMCM/IDELAYCTRL support.
2020-09-03 18:58:10 +02:00
Stephane Gourichon
Florent Kermarrec
Gabriel Somlo
Jędrzej Boczar