65b1436e0b
autoapproach: test refreshing bram
2023-01-23 04:47:12 +00:00
034f76da41
autoapproach: add bram and test
2023-01-23 04:43:51 +00:00
7ceaa730d9
remove hardcoded P and I changes
2023-01-12 19:19:19 +00:00
ca5105a6bb
start rewrite kernel
2023-01-01 21:10:02 +00:00
f8bf634345
reorganization; remove json
2022-12-31 20:15:24 +00:00
6604e35b89
autoapproach draft #1
2022-12-28 19:32:35 +00:00
96e9a3d043
raster simulate
2022-12-23 20:22:48 +00:00
013774e28b
raster_sim: rewrite to fit new module definitions
2022-12-21 05:56:49 +00:00
a79ace9568
raster_cmds: add
2022-12-21 05:24:33 +00:00
a918d74f05
introduce control interface; pack adc_data bits into large vector instead of an array
2022-12-21 05:16:15 +00:00
ac0ed9e2a7
yosys does not support input arrays
2022-12-20 06:25:45 +00:00
a2acccbca6
misc
2022-12-20 06:07:54 +00:00
c52f649313
programmers manual
2022-12-20 05:51:30 +00:00
4ba004336c
ram_shim: simulate
2022-12-20 05:51:05 +00:00
15480f11da
ram_fifo: add empty and full ports
2022-12-18 06:06:44 +00:00
1be89f314c
simulate and verify ram_fifo and ram_fifo_dual_port
2022-12-17 18:39:58 +00:00
60404cd026
ram_fifo.v: add simulator debugging checks
2022-12-17 10:18:15 -05:00
f0f1750a9a
add ram_fifo_dual_port wrapper to single port FIFO
2022-12-17 10:03:06 -05:00
3612148ee1
raster/ram_fifo: correct misspelling
2022-12-17 09:56:57 -05:00
f536a41784
control_loop: remove reg keyword, yosys doesnt like it
2022-12-17 09:56:26 -05:00
644f4142a2
raster work
2022-12-17 00:46:04 +00:00
ffdf4fb2f2
import Xilinx FIFO36E1 simulation
2022-12-16 20:46:00 +00:00
59b6efce7e
raster_sim.v: add and lint
2022-11-26 12:00:10 -05:00
a12fbf8af2
ram_shim: add and lint
2022-11-26 11:53:57 -05:00
c8d7572db5
raster.v: lint
2022-11-26 11:47:06 -05:00
9282c33cce
add ram shim
2022-11-24 11:07:30 -05:00
1ed48fbc90
control_loop_sim: add comments
2022-11-24 10:08:00 -05:00
cef639784b
control_loop_sim: modify second P value
2022-11-24 10:00:05 -05:00
1d54b41735
fix bit width bug
2022-11-24 09:55:15 -05:00
33ec8351d8
correctly (and crudely) simulate control loop
...
Issue was that the ADC cycle half wait (SCK delay) was too fast
for the input buffering (since MISO and MOSI are physical inputs
and not FPGA wires).
2022-11-24 09:48:19 -05:00
6ad2de97cf
sketch out raster scan
2022-11-24 00:50:21 -05:00
adb81e201e
fix dac simulation
2022-11-21 22:56:40 -05:00
5ff6b279b0
reverify math
2022-11-21 22:24:37 -05:00
79cae3dd66
(somewhat) fix counter
2022-11-21 22:08:25 -05:00
cfb0f92528
fix adc_sim
2022-11-21 22:04:46 -05:00
5909f548d5
control loop simulator passes lint
2022-11-21 21:41:50 -05:00
0114c449c3
correct simulation of control loop
2022-11-19 12:55:55 -05:00
a0450fb0ff
control_loop_math: fix compile errors and verify simulation
2022-11-18 19:27:29 -05:00
0c10dc921c
more work on control_loop
...
* Make SPI masters internal to control loop module
* Rename commands to use I isntead of alpha
* add ADC value -> DAC value conversion to control loop math
2022-11-18 19:11:56 -05:00
3a23ac6e92
control_loop; add dirty bit to decrease the amount of comparisons
2022-11-17 19:14:24 -05:00
8d11442cbb
update .gitignore
2022-11-17 19:07:49 -05:00
29e0e8dfb3
integrate control_loop_math into control_loop
2022-11-17 19:07:21 -05:00
d9f4a40c6d
update GUIDELINES.md
2022-11-17 18:39:48 -05:00
82ff659a44
add DAC ramp
2022-11-17 17:32:32 -05:00
0907a76c22
import spi v0.2
2022-11-14 08:43:16 -05:00
50ea679e02
Rewrite control_loop_math and simulate
...
Replace specialized math nodes with single multiplier: each constant
must be resized to fit in the multiplier. Simplifies design at the
cost of speed.
2022-11-13 18:03:55 -05:00
88c42a9f4a
add printing of fixed point values in C++
2022-11-12 01:44:30 -05:00
c21e2bbb63
add calculate dt module with simulation
2022-11-11 22:42:06 -05:00
7637a1db9a
import updated boothmul
2022-11-11 22:14:50 -05:00
45f815c5d3
changes
2022-11-11 21:57:58 -05:00
