51b8eb1f82
bench: add xcu1525 target.
2020-10-29 19:11:23 +01:00
a95c6883cc
bench/targets: uniformize.
2020-10-29 18:58:37 +01:00
256cc1b78b
bench/genesys2: add optional BIST.
2020-10-29 15:12:17 +01:00
8169b5412c
Merge pull request #223 from gregdavill/ecp5_delayf_fix
...
ecp5ddrphy: Fix DELAYF initial value
2020-10-20 18:11:46 +02:00
0c8c707f24
ecp5ddrphy: Fix DELAYF initial value
...
I've seen intermittent failures with recent builds. I suspect it is
related to the DELAYF primitive not being correctly loaded with an
initial value. Holding LOADN LOW ensures a value is correctly
loaded.
2020-10-20 16:44:32 +10:30
a39d873946
phy/ecp5ddrphy: remove rst CSR (does not seem to be necessary on ECP5).
2020-10-19 09:48:50 +02:00
2ea854225f
frontend/bist: expose core for observation.
2020-10-19 09:47:33 +02:00
7d8f4713d3
Merge pull request #222 from daveshah1/rcd_fine_speed_int
...
init: Cast DDR4 RCD fine_speed to int
2020-10-13 15:01:20 +02:00
eb6268a783
init: Cast DDR4 RCD fine_speed to int
...
Fixes `TypeError: unsupported operand type(s) for |: 'int' and 'float'`
for some clock frequencies.
Signed-off-by: David Shah <dave@ds0.me>
2020-10-13 13:10:31 +01:00
ce2c410965
phy/s7ddrphy/A7DDRPHY: fix cmd_latency parameter (allow user to specify it).
2020-10-13 10:36:22 +02:00
85fa02afc7
Merge pull request #221 from enjoy-digital/write_latency
...
Add dynamic write latency calibration.
2020-10-12 19:42:26 +02:00
80b5ed30e9
phy/ecp5ddrphy: reintegrate old BitSlip (issue with new one on ECP5).
2020-10-12 19:40:11 +02:00
1ee4fa25c4
phy/ecp5ddrphy: add rst CSR.
2020-10-12 19:25:34 +02:00
df73b982ee
test/reference: update
2020-10-12 18:50:31 +02:00
60c68bf949
init/get_sdram_phy_c_header: fix ECPDDRPHY case.
2020-10-12 18:47:44 +02:00
a18d04da42
phy/s7ddrphy: simplify cmd_latency (set it to 1 as default except for a7ddrphy).
2020-10-12 18:33:04 +02:00
97b4029be7
litedram/init: pass write latency calibration capability to software.
2020-10-12 16:05:59 +02:00
a1e8bcb53c
phy/s7/usddrphy: reset bitslip modules with rst CSR.
2020-10-12 10:41:33 +02:00
5d528cbad0
phy/usddrphy: add write leveling bitslip support on dq/dm/dqs (similar to s7ddrphy).
2020-10-08 19:50:18 +02:00
1d450bac57
common/BitSlip: reset value to value.reset.
2020-10-08 19:40:40 +02:00
9787b868e8
phy/s7ddrphy: add dynamic control of dq/dm/dqs bitslips.
2020-10-08 18:52:45 +02:00
83d70a3eb9
phy/s7ddrphy: also add bitslip on dqs.
2020-10-08 18:17:47 +02:00
0ac23fde52
phy/s7ddrphy: increase write_latency by 1 (now possible with previous BitSlip chantges).
2020-10-08 18:08:36 +02:00
3fddff3a11
common/BitSlip: shift output by one bit (allow 1 cycle latency on writes), set reset value to cycles*dw-1.
2020-10-08 17:37:24 +02:00
732df04413
common/Bitslip: add assert on cycles.
2020-10-08 17:16:21 +02:00
6e8d37c873
phy/s7ddrphy: replace dm/dq delays with BitSlip.
2020-10-08 17:15:22 +02:00
c16628531a
common/BitSlip: allow passing i/o signals as parameters.
2020-10-08 16:56:22 +02:00
fcd1b2ca2b
phy/s7ddrphy: reduce write_latency on controller by 1 sys_clk (to allow BitSlip).
2020-10-08 16:23:06 +02:00
b24943e691
bench/genesys2: add litescope on ddrphy.dfi.
2020-10-08 16:21:02 +02:00
e5f4f828ad
phy/s7ddrphy: fix dynamic rd/wrphase and dq/dqs_oe_delay for nphases=2.
2020-10-07 18:54:43 +02:00
b16e9bfd5c
phy/s7/usddrphy: cleanup/uniformize DQ path.
2020-10-02 12:43:02 +02:00
39178ce460
test: add minimal OSERDESE2/OSERDESE3 simulations to check Data/Tristate latencies.
2020-10-02 12:30:19 +02:00
329c9904f7
common/DQSPattern: add transmission order, minor simplification on USDDRPHY.
2020-10-02 12:26:57 +02:00
16480d9aed
phy/s7ddrphy: adjust dqs/dq tristate latency.
...
OSERDESE2 has a latency of 2 sys_clk.
2020-10-02 12:15:32 +02:00
6a23bd623b
phy/ecp5/s7/usddrphy: simplify dq/dqs tristate using TappedDelayLine.
2020-10-02 09:37:32 +02:00
e3461704b5
phy/ecp5/s7/usddrphy: simplify control path using TappedDelayLine.
2020-10-01 18:30:17 +02:00
d12caf1e0c
common: add TappedDelayLine to simplify delays on control signals.
2020-10-01 18:29:35 +02:00
a5a4a422dd
phy/core: move rd/wrcmdphase and computation to Multiplexer.
...
rd/wrcmdphases are always computated as (rd/wrphase-1)%nphases so it's not useful
to expose them as PhySettings. rd/wrcmdphases are now directly computated in
Multiplexer and static/dynamic rd/wrphases are supported.
2020-10-01 11:26:04 +02:00
f8ee596464
test/reference: update.
2020-09-30 19:49:38 +02:00
c8f1e80215
phy/s7ddrphy: handle cmd_latency properly (add it to rd/wrphase).
2020-09-30 19:45:23 +02:00
b1c26d996f
phy/s7ddrphy: handle cmd_latency properly (add it to rd/wrphase).
2020-09-30 19:40:55 +02:00
05ed5bf59d
phy/ecp5ddrphy: simplify using new get_sys_phase.
2020-09-30 19:39:10 +02:00
207b8f48bb
common: simplify/rename get_sys_phase (cmd_phase is always -1 can be calculated on phys).
2020-09-30 19:38:43 +02:00
a611778e3d
litedram/init/get_sdram_phy_c_header: add CL/CWL defines.
2020-09-30 19:19:31 +02:00
6d063b196c
test/reference: update.
2020-09-30 18:06:48 +02:00
18e8f5c565
phy/usddrphy: add dynamic read/write phase support.
2020-09-30 17:13:55 +02:00
afe29d4231
phy/s7ddrphy: add dynamic read/write phase support.
2020-09-30 17:13:41 +02:00
a67aed2a02
init/get_sdram_phy_c_header: add support for dynamic write/read phases.
2020-09-30 17:07:34 +02:00
c4d7083677
test/reference: update.
2020-09-30 13:29:39 +02:00
d06e2dda23
phy/usddrphy: simplify dq_bitslip.o mapping.
2020-09-30 11:41:43 +02:00
Florent Kermarrec
Greg Davill
David Shah