4e62d28af6
examples/.yml: set cmd_latency to 1 on Kintex7/Ultrascale (values valided in LiteX-Boards).
2020-08-06 11:52:34 +02:00
07bf34d0e7
frontend/wishbone: revert non-FSM version, the FSM one does not seem to cover all cases.
2020-08-05 15:48:23 +02:00
9c5ce52b88
common: add connect method to LiteDRAMNativePort and use it in adapter for identify converter.
2020-08-05 12:17:25 +02:00
06f7192fb6
frontend/adapter/LiteDRAMNativePortConverter: simplify using ratio.
2020-08-05 11:41:54 +02:00
a3dfc1db25
frontend/adapter: minor cleanups.
2020-08-05 11:34:49 +02:00
deac4c8134
frontend/adapter: simplify LiteDRAMNativePortDownConverter.
2020-08-05 11:28:44 +02:00
ce4e7f9ad0
frontend/adapter: simplify LiteDRAMNativePortCDC using stream.ClockDomainCrossing.
2020-08-05 11:24:48 +02:00
16fd46bf35
frontend: rename adaptation to adapter.
2020-08-05 11:10:42 +02:00
4970c8aa8c
frontend/wishbone: simplify/review and get FSM back (ease comprehension).
2020-08-05 11:05:00 +02:00
47a0d5fb9e
litedram_gen/LiteDRAMUSDDRPHYCRG: remove AsyncResetSynchronizer on sys/sys4x (reset handled by USIDELAYCTRL).
2020-07-29 08:12:49 +02:00
02e67ec7c5
Merge pull request #192 from antmicro/jboc/port-adaptation
...
Implement LiteDRAMNativePortUpConverter with mode="both"
2020-07-28 19:02:33 +02:00
71b991ec08
Merge pull request #210 from oskirby/ddr3-tdqs-mode
...
Add support for TDQS mode.
2020-07-27 10:52:48 +02:00
805a37447c
Add support for TDQS mode.
...
This adds an optional argument to add_electrical_settings() that can
enable the TDQS mode for x8 DDR3 modules. Normally this would be used
when mixing x4 and x8 modules (eg: heterogenous DIMMS), but it can
also workaround boards with missing or broken DM signals.
2020-07-26 15:51:07 -07:00
c01e86865f
phy/gensdrphy/HalfRateGENSDRPHY: review/simplify and reduce read_latency by 1.
2020-07-24 11:07:15 +02:00
f51052f8b7
core/controller: fix burst_length regression introduced by #206 .
2020-07-18 23:06:11 +02:00
c4ac887ec2
Merge pull request #206 from antmicro/jboc/gensdrphy
...
Add HalfRate GENSDRPHY
2020-07-15 08:19:37 +02:00
2c5fc6621a
phy/gensdrphy: fix problems with half-rate phy, tested on minispartan6
2020-07-14 10:58:58 +02:00
7f55e2e2c5
phy/gensdrphy: add half-rate PHY
2020-07-13 17:03:01 +02:00
edd5e0ec78
phy/gensdrphy: padd clk to SDROutput/SDRInput/SDRTristate.
2020-07-08 07:00:11 +02:00
a8fa38e286
phy/ecp5ddrphy: cosmetic cleanups.
2020-06-30 09:25:44 +02:00
8c339b9945
litedram_gen: update ECP5 clocking.
2020-06-29 19:30:13 +02:00
f6cc1cdb08
litedram_gen: increase integrated_rom_size to 0x8000.
2020-06-29 19:28:11 +02:00
9044c10408
phy/ecp5ddrphy: use sys_rst instead of sys2x_rst as reset on primitives and do sys2x reset externally.
2020-06-29 16:09:14 +02:00
fa7d91a053
phy/ecp5: simplify/fix dqs_oe/dq_oe and revert BitSlip on dq_i_data.
...
dq/dqs_oe was one cycle of and BitSlip on dq_i_data is required for correct initialization.
2020-06-29 16:06:56 +02:00
8c112c709c
Merge pull request #207 from ozbenh/sim-autoinit
...
dfii: Really default to HW control
2020-06-10 10:36:05 +02:00
4580882c69
dfii: Really default to HW control
...
Looks like there was a typo in commit
a595fe07f2
2020-06-10 16:06:46 +10:00
52d7dbe3a6
frontend/fifo: make sure FIFO is only used on LiteDRAMNativePort, expose writer/reader fifo depth, add separators and update copyrights.
2020-06-04 09:26:13 +02:00
c4c8803f4f
Merge pull request #204 from antmicro/jboc/spd-read
...
Add DDR4 SPD EEPROM data parser
2020-06-04 08:54:59 +02:00
067e8a5eb3
Merge pull request #205 from antmicro/jboc/fifo
...
frontend/fifo: increase FIFO level only after data has actually been written
2020-06-04 08:41:04 +02:00
e5179eb9ab
gen: fix LiteDRAMFIFO parameters
2020-06-03 17:39:45 +02:00
8fedc3fcd2
frontend/fifo: increase FIFO level after data has actually been written
2020-06-03 16:13:28 +02:00
992f80c68b
litedram_gen: add Ultrascale(+) support and KCU105 config file, remove cmd_delay on 7-series (not automatically calibrated).
2020-06-03 09:35:40 +02:00
361d250677
litedram_gen: avoid second S7PLL for iodelay clk, generate it from main S7PLL on CLKOUT0 (with fractional divide).
2020-06-03 09:04:00 +02:00
1b56dcf364
litedram_gen: add more memtype asserts, remove csr_alignment (now fixed to 32-bit).
2020-06-03 08:57:31 +02:00
a595fe07f2
dfii: simplify control using CSRFields.
2020-06-02 16:31:33 +02:00
899462c864
Merge pull request #202 from ozbenh/sim-autoinit
...
Default to HW control for sim
2020-06-02 15:48:41 +02:00
863c45a114
test/spd_data: add missing files to tracking
2020-06-02 15:19:53 +02:00
cbd90877b0
modules/spd: select tFAW_min_ck depending on page size
2020-06-02 12:19:38 +02:00
a8f2c044c9
modules: add DDR4SPDData parser
2020-06-02 12:16:41 +02:00
d62fd24c81
Merge pull request #201 from antmicro/jboc/spd-read
...
modules/spd: save SPD data in SDRAMModule
2020-06-01 21:16:58 +02:00
4233f86112
modules/spd: save SPD data in SDRAMModule to allow for runtime verification
2020-06-01 16:56:41 +02:00
f3f89ed8d1
Default to HW control for sim
...
(needs corresponding sdram.c fix in litex)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2020-06-01 23:44:59 +10:00
f23cb8056d
litedram_gen: revert builder.build(..., regular_comb=False).
2020-05-27 19:56:00 +02:00
d1db115d6c
litedram_gen: review/simplify #197 .
2020-05-27 19:42:40 +02:00
a8e281f7c5
Merge pull request #197 from ozbenh/standalone-sim
...
Allow generation of a standalone sim model
2020-05-27 19:16:00 +02:00
83b9a1d798
Merge pull request #199 from antmicro/jboc/spd-read
...
modules: add function for parsing SPD EEPROM dumps from BIOS firmware
2020-05-27 14:57:16 +02:00
d0f0c94652
phy/model: Don't generate empty mem_*.init files
...
When using the SDRAM PHY model without specified init data, the
generator still generates a bunch of $readmemh for each bank
reading mem.init, mem_1.init etc... all of which are 0-sized files.
This is cumbersome especially when using a standalone model in
an external project.
This is fixed by having the default bank_init be set to a list
of "None" rather than a list of empty lists.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2020-05-22 18:09:11 +10:00
b8d6da534f
gen: Allow generation of a standalone sim model
...
If the --sim argument is passed, this generates a model using
the simulation platform and simulated PHY.
Note: The data_width is set to 16 for now, which matches the
Arty. I haven't yet figured out how to extract that info from
the data we have in the .yml
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2020-05-22 18:09:06 +10:00
cbe91bcd41
modules: add function for parsing SPD EEPROM dumps from BIOS firmware
2020-05-21 16:18:34 +02:00
639a31fdd2
test/test_timing: update test_txxd_controller.
2020-05-20 23:40:01 +02:00
Florent Kermarrec
Owen Kirby
Jędrzej Boczar
Benjamin Herrenschmidt