30723b1bb0
targets: Update targets that were still using argparse.ArgumentParser.
2022-11-06 22:07:17 +01:00
33b0400aed
targets: Update LiteXArgumentParser imports.
2022-11-06 21:39:52 +01:00
57f59409ac
Merge pull request #447 from trabucayre/rework_toolchain_args
...
targets: replace LiteXSoCArgumentParser by LiteXArgumentParser, remove tasks done LiteXArgumentParser
2022-11-06 21:34:06 +01:00
9960f38d95
targets: replace LiteXSoCArgumentParser by LiteXArgumentParser, remove tasks done LiteXArgumentParser
2022-11-06 11:27:47 +01:00
61eb39101a
Merge pull request #445 from Icenowy/stlv
...
stlv7325, a_e115fb: use the proper vendor name Sitlinv
2022-10-30 09:50:30 +01:00
d7184fb043
stlv7325, a_e115fb: use the proper vendor name Sitlinv
...
The boards are in fact from a vendor called 成都赛特凌威科技有限公司,
and their English registered trademark (used on the banner of their
Taobao store) is Sitlinv, which sounds like 赛特凌威.
Use this vendor name instead of where it's bought.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-10-30 10:51:13 +08:00
4dc8f7223c
Merge pull request #443 from trabucayre/arty_z7_bios
...
targets/digilent_arty_z7: adding software support
2022-10-28 10:42:35 +02:00
3e809c3a1e
targets: Fix some LiteXModule imports.
2022-10-28 10:35:57 +02:00
ab3ed624cc
fpgawars_alhambra2: +x.
2022-10-28 10:31:49 +02:00
20e65ce223
Merge pull request #442 from litex-hub/switch_to_litex_module
...
targets: Switch to LiteXModule to simplify/cleanup code.
2022-10-28 10:29:52 +02:00
5f1b80fac4
targets/digilent_arty_z7: adding software support
2022-10-27 21:47:32 +02:00
548a028730
targets: Switch to LiteXModule to simplify/cleanup code.
2022-10-27 21:21:37 +02:00
6c05ddae1b
Merge pull request #438 from shawnanastasio/nexys4_part_name
...
platforms/nexys4*: Update part name
2022-10-27 12:11:07 +02:00
d863066942
Merge pull request #440 from jmrobles/main
...
Add FPGAWars Alhambra II
2022-10-27 09:29:14 +02:00
f9d3a39001
chore fix target, args processing
2022-10-26 20:45:53 +02:00
189ee3de39
fix target
2022-10-26 20:36:18 +02:00
54af30a4be
fix: arg cpu-variant
2022-10-26 20:23:14 +02:00
32be05cfb1
chore default CPU variant
2022-10-25 21:14:25 +02:00
125569b2cb
add FPGAWars Alhambra II
2022-10-25 21:12:02 +02:00
bd2f1c2553
targets/isx_im1283: Fix CI.
2022-10-22 16:23:50 +02:00
8e35f15c22
Merge pull request #437 from trabucayre/fix_redpitaya_mem_region
...
targets/redpitaya: fix csr & reset region
2022-10-22 16:00:22 +02:00
474dcb5fb3
Merge pull request #436 from Icenowy/isx-im1283
...
Add ISX iM1283 board
2022-10-22 15:56:43 +02:00
d4b2461b5a
platforms/nexys4*: Update part name
...
Symbiflow/f4pga don't recognize the part name xc7a100t-CSG324-1, so
change it to xc7a100tcsg324-1 which works with both f4pga and Vivado.
2022-10-21 14:15:27 -05:00
5a8d846a86
targets: Remove add_csr calls (no longer required).
2022-10-21 08:42:24 +02:00
377cda05a3
ti60_f225_dev_kit: Switch 1.2V banks to 1.8V to fix compilation issues with latest Efinity.
...
Will need to be investigated more.
2022-10-20 18:21:52 +02:00
4a5d5318d7
targets/redpitaya: fix csr & reset region
2022-10-20 16:35:57 +02:00
fbfd457ea0
ci: Bump to ubuntu 20.04.
2022-10-14 18:16:28 +02:00
745ebbbfa1
Add ISX iM1283 board
...
ISX iM1283 is a "simple eDP signal generator" which utilizes a XC7A100T
FPGA, and come with a header populated with the FPGA's JTAG.
This commit adds initial reverse engineered IOs including the DDR3 DRAM
(which cannot work reliably @ DDR3-800, so the system clock is defaultly
set to 80MHz now), two LEDs and SD slot.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-10-14 22:50:43 +08:00
cb65099399
Merge pull request #435 from trabucayre/fix_artyz7_build
...
targets/digilent_arty_z7: add flash region
2022-10-14 15:49:52 +02:00
23c6acd013
platforms/ti60_f225_dev_kit: Fix IO voltage conflicts between peripherals/banks.
...
Was already reported as a warning on 2021.1.165.2.19 but now an error with 2022.1.226.
Note: To get the build working with 2022.1.226 the following change had to be done to
pt/bin/writer/pinout.py, line 2254:
- table.add_rows(table_rows)
+ for table_row in table_rows:
+ table.add_row(table_row)
This would need to be investigated more to know if related to our local setup/machine.
2022-10-14 10:22:54 +02:00
e44e63f65d
targets/digilent_arty_z7: add flash region
2022-10-13 19:48:41 +02:00
3b339ba9a3
platforms/xilinx_kc705: Fix flash proxy name.
2022-10-13 08:48:33 +02:00
99888c52ce
xilinx_kc705/i2c: Add pullups.
2022-10-11 17:26:06 +02:00
be8cd1f8a4
Merge pull request #432 from fjullien/add_qmtech_cyclone_4_starter_kit
...
Add qmtech Cyclone IV Starter Kit
2022-10-10 09:25:42 +02:00
3ec18c3583
Add qmtech Cyclone IV Starter Kit
2022-10-09 16:34:44 +02:00
e6762e228c
targets/mnt_rkx7: Make USB-Host optional and disable by default (for CI).
2022-10-04 09:45:51 +02:00
d0dd009329
targets/mnt_rkx7: Integrate specific eDP video timings in target (Avoid LiteX patch).
2022-10-04 09:29:59 +02:00
d6dadb6058
Merge pull request #431 from mntmn/master
...
MNT RKX7: update platform and target for D-2 release
2022-10-04 08:57:24 +02:00
c38b8b1d8c
MNT RKX7: update platform and target for D-2 release
2022-10-03 20:09:48 +02:00
bece3b67aa
Merge pull request #430 from pftbest/ddr_fix
...
stlv7325: Adjust DDR3 pins to match the reference design
2022-10-01 13:50:21 +02:00
cf416d0d66
stlv7325: Adjust DDR3 pins to match reference design
2022-10-01 11:15:47 +02:00
fb6efe1fa2
Merge pull request #429 from trabucayre/video_swap_blue_red
...
targets/litex_acorn_baseboard: fix pn_swap
2022-09-29 17:04:52 +02:00
85ba931a3d
targets/litex_acorn_baseboard: fix pn_swap
2022-09-28 21:17:16 +02:00
2bc3049690
Merge pull request #427 from pftbest/patch-1
...
aliexpress_stlv7325: Fix missing parameter for PULLUP attribute
2022-09-27 10:18:21 +02:00
57eb907210
aliexpress_stlv7325: Fix missing parameter for PULLUP attribute
2022-09-25 23:13:44 +02:00
8c3a5c0608
sipeed_tang_nano_9k: Fix HDMI IOs constraints.
2022-09-23 11:18:30 +02:00
9cd1c1cbd5
targets/digilent_arty: Switch with_buttons to False by default (To fix #426 ).
2022-09-23 10:07:17 +02:00
dcb9e2b763
Merge pull request #424 from slagernate/main
...
add option to use ecpprog for crosslink-nx eval board
2022-09-19 13:33:48 +02:00
9dbee62eac
add option to use ecpprog for crosslink-nx eval board
2022-09-15 12:27:08 -07:00
30180892fa
test/test_targets: Exclude newae_cw305 from platform tests.
2022-09-13 14:55:24 +02:00
Florent Kermarrec
Gwenhael Goavec-Merou
Icenowy Zheng
Chema
Shawn Anastasio
Franck Jullien
Lukas F. Hartmann
Vadzim Dambrouski
slagernate