575d681891
targets: Use "" for strings.
2022-04-21 15:48:29 +02:00
353aba0359
targets: Move USB-ACM/ValentyUSB clone directly to LiteX to avoid duplication in targets.
2022-04-21 15:43:50 +02:00
4fbf2fc7de
targets: Replace self.add_wb_master with self.bus.add_master.
2022-04-21 15:32:19 +02:00
39a314cdae
Rename aliexpress_u420t to aliexpress_xc7k420t.
2022-04-21 14:28:26 +02:00
88f2625c3d
targets: Fix typos.
2022-04-21 12:29:54 +02:00
a611f035d6
targets: Move CRG before SoCCore init (More logical and simplify some specific reset schemes) and switch SoCCore to one line when possible.
...
Moving CRG simplify reset with NaxRiscv debug module and is in fact more logical.
Also do some minor updates/cosmetic changes while touching CRG/SoCCore.
2022-04-21 12:19:45 +02:00
06396a2cb6
Merge pull request #384 from hansfbaier/qmtech-ep4cgx150
...
add board support for QMTech EP4CGX150
2022-04-21 10:36:51 +02:00
b2a346edc8
aliexpress_u420t: Review/Simplify.
...
Specific integrated ROM/SRAM/MAIN_RAM size can be passed through command line parameters.
2022-04-21 10:32:18 +02:00
3e9e970076
Add aliexpress prefix to boards from aliexpress that seem to be from the same unknown vendor.
2022-04-21 10:06:11 +02:00
8c51cb12c8
Merge pull request #383 from sysmanalex/master
...
Added Kintex-7 xc7k420t xc7k420tiffg901-2L named as u420t board
2022-04-21 10:02:05 +02:00
f986855926
Merge pull request #372 from mkj/butterstick-ethdelay
...
butterstick: set ethernet rx_delay to 0ns
2022-04-21 09:00:13 +02:00
53e9e0914e
qmtech_ep4cgx150 80MHz default works well
2022-04-16 15:00:01 +07:00
b41d72e1d0
add board support for QMTech EP4CGX150
2022-04-16 06:36:24 +07:00
23b1b15486
Add initial/minimal Pluto SDR support.
2022-04-14 12:13:03 +02:00
1e00a43fdd
board u420t kintex update v0.2
2022-04-13 00:12:59 +03:00
89570b005c
Added Kintex-7 xc7k420t xc7k420tiffg901-2L named as u420t board
2022-04-12 22:38:14 +03:00
b99d788732
fairwaves/xtrx: Update with xtrx_julia improvements.
2022-04-12 17:42:52 +02:00
dd27a3473b
platforms: Add LambdaConcept's PCIe Screamer/M2.
2022-04-01 11:41:07 +02:00
00ff61baa9
targets: Simplify clock domains and remove useless reset_less.
...
rst was not directly assigned/used on reset_less clock domains, so reset_less
property was not really useful. With the changes on stream.CDC, having a rst
(Even fixed at 0) is now mandatory on clock domains involved in the CDC, so this
also fixes targets.
2022-04-01 11:30:38 +02:00
867489d855
xilinx_zcu106: Add PCIe Gen3 X4 support.
2022-04-01 10:01:06 +02:00
299d4d66d6
efinix: ti60f225 add MIPI RX
2022-03-29 15:29:59 +02:00
13e5062793
Merge pull request #379 from chmousset/add_t8_devkit
...
[enh] added efinix t8f81 dev kit
2022-03-28 14:58:21 +02:00
e6a9f44580
Merge pull request #378 from antmicro/add-missing-peripherals
...
DDR4 datacenter: add missing peripherals
2022-03-28 14:40:22 +02:00
83d7c3fb39
Merge pull request #377 from Johnsel/arduino_mkrvidor4000
...
Board support for Arduino MKR Vidor 4000
2022-03-28 14:34:59 +02:00
7a68dcc79b
[enh] added efinix t8f81 dev kit
2022-03-26 09:52:20 +01:00
33516a40f4
antmicro_datacenter: add missing peripherals
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2022-03-25 13:49:41 +01:00
77cb866233
antmicro_datacenter: add HDMI output
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2022-03-25 10:03:07 +01:00
501c50ff79
Fixed serial port comments hinting the correct pins.
2022-03-24 08:04:47 -07:00
901942bda6
Cleanup for pushing. This commit combined with my litedram fork produces a running basic SoC + bios --=============== SoC ==================--
...
CPU:BUS:E 32-bit @ 4GiB
CSR:16-bit @ 48MT/s (CL-2 CWL-2)
--========== Initialization ============--
Initializing SDRAM @0x40000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
Memtest at 0x40000000 (2.0MiB)...
Write: 0x40000000-0x40200000 2.0MiB
Read: 0x40000000-0x40200000 2.0MiB
Memtest OK
Memspeed at 0x40000000 (Sequential, 2.0MiB)...
Write speed: 13.6MiB/s
Read speed: 21.3MiB/s
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
2022-03-24 07:39:14 -07:00
e445c9ec71
qmtech_5cefa2: make serial pins consistent with other boards
2022-03-24 18:52:28 +07:00
c081177d77
pynq_z1/zybo_z7: Update .xci (With changes from #99 ).
2022-03-24 09:15:36 +01:00
bcedf573e0
adi_adrv2crr: Add IO definition for the AD9545 reset line
...
We use PULLUP on it so that the AD9545 is by default held out
of reset without the user having to do anything ...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
cdb78efd3c
adi_adrv2crr: Document I2C devices attached
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
6c31f16df2
adi_adrv2crr: Fix I2C signal assignement
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-23 20:42:30 +01:00
bb974ae1af
decklink_quad_hdmi_recorder: Add pcie_lanes parameter and 4x/8x support.
2022-03-23 15:24:49 +01:00
73458ae9d7
decklink_quad_hdmi_recorder: Add Serial/UART pins.
2022-03-23 11:08:51 +01:00
d399f33dda
Merge pull request #374 from smunaut/adrv2crr
...
adi_adrv2crr: Upgrade part to speedgrade 2
2022-03-23 09:09:57 +01:00
4ca527974b
Merge pull request #373 from goran-mahovlic/patch-1
...
faster sdcard boot on 2.0
2022-03-23 08:07:49 +01:00
dc92584681
adi_adrv2crr: Upgrade part to speedgrade 2
...
Even though the schematic and bom call for speedgrade 1, this was only for
the prototypes.
All productions units have been updated to speedgrade 2.
See this thread:
https://ez.analog.com/fpga/f/q-a/112356/adrv9009-zu11eg-speed-grade
And the official HDL project for the board:
https://github.com/analogdevicesinc/hdl/blob/master/projects/adrv9009zu11eg/adrv2crr_fmc/system_project.tcl#L16
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-22 23:36:41 +01:00
ce4b627e3c
targets: Remove l2_size workaround (no longer required).
2022-03-22 19:13:23 +01:00
68c23e9251
faster sdcard boot on 2.0
2022-03-22 17:54:12 +01:00
2a206def0f
targets/ecp5/ddr3: Uniformize cd_sys2x (reset_less).
2022-03-22 17:32:35 +01:00
53c221a1fa
butterstick: set ethernet rx_delay to 0ns
...
The Microchip KSZ9031RNX PHY on the Butterstick has a default 1.2ns
internal RX delay so we shouldn't add the default 2ns MAC delay.
In testing with Linux on vexriscv I haven't seen any difference either
way, but with liteeth in Microwatt I have seen 30%+ packet loss when
receiving from certain ethernet devices (RTL8153 and AX88179 usb-gige
adapters, a GS105 switch didn't show the problem). Setting RX delay=0
resolves the problem. A TX delay is still required by the PHY.
2022-03-22 13:51:03 +08:00
b8b0aead28
Added basic support for Arduino MKR Vidor 4000
2022-03-21 18:54:29 -07:00
9d452b0d74
targets: Create target_group for target arguments.
2022-03-21 18:37:40 +01:00
d90e260414
targets/digilent_atlys: Fix target.
2022-03-21 17:38:02 +01:00
cc8da9d341
targets: Simplify imports and switch to LiteXSocArgumentParser.
...
CPU parameters are now selectively exposed to the user:
./digilent_arty.py --cpu-type=vexriscv_smp --help will show VexRiscv-SMP parameters.
./digilent_arty.py --cpu-type=naxriscv --help will show NaxRiscv parameters.
2022-03-21 16:59:40 +01:00
eb8657f515
gsd_orangecrab: Revert dm_remapping (Useful when built with VexRiscv-SMP and native LiteDRAM interface).
2022-03-18 12:56:13 +01:00
3ebad7f7cc
gsd_orangecrab/butterstick: Add assert on devices.
2022-03-18 10:44:21 +01:00
9faa805ab9
alinx_ax7010: Review/Cleanup.
2022-03-17 11:31:02 +01:00
Florent Kermarrec
Hans Baier
Alex Petrov
Alex Petrov
Franck Jullien
Charles-Henri Mousset
Alessandro Comodi
John Simons
Sylvain Munaut
Goran Mahovlic
Matt Johnston