6edfb2ca7a
Merge pull request #448 from trabucayre/fix_alinx_axu2cga_platform
...
platforms/alinx_axu2cga: adding missing psu_config at platform level
2022-11-06 22:11:25 +01:00
9a2028a9ba
targets: Remove useless argparse imports.
2022-11-06 22:09:21 +01:00
30723b1bb0
targets: Update targets that were still using argparse.ArgumentParser.
2022-11-06 22:07:17 +01:00
24cd983b8c
platforms/alinx_axu2cga: adding missing psu_config at platform level
2022-11-06 21:52:00 +01:00
33b0400aed
targets: Update LiteXArgumentParser imports.
2022-11-06 21:39:52 +01:00
9960f38d95
targets: replace LiteXSoCArgumentParser by LiteXArgumentParser, remove tasks done LiteXArgumentParser
2022-11-06 11:27:47 +01:00
d7184fb043
stlv7325, a_e115fb: use the proper vendor name Sitlinv
...
The boards are in fact from a vendor called 成都赛特凌威科技有限公司,
and their English registered trademark (used on the banner of their
Taobao store) is Sitlinv, which sounds like 赛特凌威.
Use this vendor name instead of where it's bought.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-10-30 10:51:13 +08:00
4dc8f7223c
Merge pull request #443 from trabucayre/arty_z7_bios
...
targets/digilent_arty_z7: adding software support
2022-10-28 10:42:35 +02:00
3e809c3a1e
targets: Fix some LiteXModule imports.
2022-10-28 10:35:57 +02:00
ab3ed624cc
fpgawars_alhambra2: +x.
2022-10-28 10:31:49 +02:00
5f1b80fac4
targets/digilent_arty_z7: adding software support
2022-10-27 21:47:32 +02:00
548a028730
targets: Switch to LiteXModule to simplify/cleanup code.
2022-10-27 21:21:37 +02:00
6c05ddae1b
Merge pull request #438 from shawnanastasio/nexys4_part_name
...
platforms/nexys4*: Update part name
2022-10-27 12:11:07 +02:00
f9d3a39001
chore fix target, args processing
2022-10-26 20:45:53 +02:00
189ee3de39
fix target
2022-10-26 20:36:18 +02:00
54af30a4be
fix: arg cpu-variant
2022-10-26 20:23:14 +02:00
32be05cfb1
chore default CPU variant
2022-10-25 21:14:25 +02:00
125569b2cb
add FPGAWars Alhambra II
2022-10-25 21:12:02 +02:00
bd2f1c2553
targets/isx_im1283: Fix CI.
2022-10-22 16:23:50 +02:00
8e35f15c22
Merge pull request #437 from trabucayre/fix_redpitaya_mem_region
...
targets/redpitaya: fix csr & reset region
2022-10-22 16:00:22 +02:00
474dcb5fb3
Merge pull request #436 from Icenowy/isx-im1283
...
Add ISX iM1283 board
2022-10-22 15:56:43 +02:00
d4b2461b5a
platforms/nexys4*: Update part name
...
Symbiflow/f4pga don't recognize the part name xc7a100t-CSG324-1, so
change it to xc7a100tcsg324-1 which works with both f4pga and Vivado.
2022-10-21 14:15:27 -05:00
5a8d846a86
targets: Remove add_csr calls (no longer required).
2022-10-21 08:42:24 +02:00
377cda05a3
ti60_f225_dev_kit: Switch 1.2V banks to 1.8V to fix compilation issues with latest Efinity.
...
Will need to be investigated more.
2022-10-20 18:21:52 +02:00
4a5d5318d7
targets/redpitaya: fix csr & reset region
2022-10-20 16:35:57 +02:00
745ebbbfa1
Add ISX iM1283 board
...
ISX iM1283 is a "simple eDP signal generator" which utilizes a XC7A100T
FPGA, and come with a header populated with the FPGA's JTAG.
This commit adds initial reverse engineered IOs including the DDR3 DRAM
(which cannot work reliably @ DDR3-800, so the system clock is defaultly
set to 80MHz now), two LEDs and SD slot.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-10-14 22:50:43 +08:00
cb65099399
Merge pull request #435 from trabucayre/fix_artyz7_build
...
targets/digilent_arty_z7: add flash region
2022-10-14 15:49:52 +02:00
23c6acd013
platforms/ti60_f225_dev_kit: Fix IO voltage conflicts between peripherals/banks.
...
Was already reported as a warning on 2021.1.165.2.19 but now an error with 2022.1.226.
Note: To get the build working with 2022.1.226 the following change had to be done to
pt/bin/writer/pinout.py, line 2254:
- table.add_rows(table_rows)
+ for table_row in table_rows:
+ table.add_row(table_row)
This would need to be investigated more to know if related to our local setup/machine.
2022-10-14 10:22:54 +02:00
e44e63f65d
targets/digilent_arty_z7: add flash region
2022-10-13 19:48:41 +02:00
3b339ba9a3
platforms/xilinx_kc705: Fix flash proxy name.
2022-10-13 08:48:33 +02:00
99888c52ce
xilinx_kc705/i2c: Add pullups.
2022-10-11 17:26:06 +02:00
3ec18c3583
Add qmtech Cyclone IV Starter Kit
2022-10-09 16:34:44 +02:00
e6762e228c
targets/mnt_rkx7: Make USB-Host optional and disable by default (for CI).
2022-10-04 09:45:51 +02:00
d0dd009329
targets/mnt_rkx7: Integrate specific eDP video timings in target (Avoid LiteX patch).
2022-10-04 09:29:59 +02:00
c38b8b1d8c
MNT RKX7: update platform and target for D-2 release
2022-10-03 20:09:48 +02:00
cf416d0d66
stlv7325: Adjust DDR3 pins to match reference design
2022-10-01 11:15:47 +02:00
85ba931a3d
targets/litex_acorn_baseboard: fix pn_swap
2022-09-28 21:17:16 +02:00
57eb907210
aliexpress_stlv7325: Fix missing parameter for PULLUP attribute
2022-09-25 23:13:44 +02:00
8c3a5c0608
sipeed_tang_nano_9k: Fix HDMI IOs constraints.
2022-09-23 11:18:30 +02:00
9cd1c1cbd5
targets/digilent_arty: Switch with_buttons to False by default (To fix #426 ).
2022-09-23 10:07:17 +02:00
9dbee62eac
add option to use ecpprog for crosslink-nx eval board
2022-09-15 12:27:08 -07:00
3cef11e04d
platforms/newae_cw305: Add sma_clk_in/out, buttons, switches and expansion header connector.
2022-09-13 14:26:52 +02:00
f1899954e9
Add initial NewAE CW305 board support.
2022-09-13 12:38:30 +02:00
25c28d2c03
fixed issue with default programmer option
2022-09-10 18:16:04 +01:00
6768be7f66
changed use example comment
2022-09-10 17:56:02 +01:00
e8504191e3
cleanup
2022-09-10 17:54:43 +01:00
6d0a4c788e
Added DFU support to Butterstick
2022-09-10 17:45:57 +01:00
756e4f73fc
sipeed_tang_primer_20k: Cleanup CRG.
2022-09-08 17:27:41 +02:00
fadc5619f1
sipeed_tang_primer_20k/ddr3: Add litescope debug.
2022-09-07 17:46:46 +02:00
6c7157f799
sipeed_tang_primer_20k: Disable L2 cache to ease debug and add WIP status.
2022-09-07 17:07:07 +02:00
enjoy-digital
Gwenhael Goavec-Merou
Icenowy Zheng
Chema
Shawn Anastasio
Franck Jullien
Lukas F. Hartmann
Vadzim Dambrouski
slagernate
Adam Zeloof