Florent Kermarrec
9543b5efae
marble/marble_mini: Add berkeleylab prefix.
2021-11-04 18:42:16 +01:00
enjoy-digital
808befec3b
Merge pull request #283 from yetifrisstlama/master
...
add Marble-board platform and target file
2021-11-04 15:20:11 +01:00
enjoy-digital
a4f8f12067
Merge pull request #284 from hansfbaier/master
...
QMTech boards: fix swapped RX/TX lines, remove double uart replacer
2021-11-04 15:18:16 +01:00
lapd
d950b3feb5
Use built-int RS232 port
...
Signed-off-by: lapd <lapd@soc.one>
2021-11-03 22:50:40 +07:00
Hans Baier
7aa639ac0f
QMTech boards: fix swapped RX/TX lines, remove double uart replacer
2021-11-02 09:34:25 +07:00
Michael Betz
e645eb243b
add marble board platform and target file
2021-10-28 18:41:22 +02:00
Florent Kermarrec
207afb98fc
ego1: Switch to VideoTerminal (LiteVideo is no longer provided by default with LiteX).
2021-10-27 16:29:46 +02:00
Florent Kermarrec
0ac0f9e75d
efinix_xyloni_dev_kit: Switch to openFPGALoader to load bitstream.
2021-10-25 12:49:48 +02:00
Florent Kermarrec
16a629269d
efinix_xyloni_dev_kit: Describe IOs in similar order than the other platforms.
2021-10-22 14:52:38 +02:00
Florent Kermarrec
75fd276dbe
efinix_xyloni_dev_kit: Increase similarities with others boards and make target very similar to iceBreaker/Fomu/TangNano4k.
2021-10-21 11:34:55 +02:00
Florent Kermarrec
dc1328f1a5
efinix_xyloni_dev_kit: Fix copyrights.
2021-10-21 10:12:46 +02:00
Florent Kermarrec
012c1d9705
efinix_trion_t20: Minor changes (move serial to platform, fix platform copyright).
2021-10-21 10:10:35 +02:00
Andrew Dennison
c548b1c1e2
efinix: xyloni dev board basic support
...
* This works: efinix_xyloni_dev_kit.py --cpu-type None --build --load --flash
* issues with SPIflash - wrong generation for tristates miso mosi for
some reason
2021-10-19 11:23:29 +11:00
enjoy-digital
a53f17380f
Merge pull request #271 from antmicro/add-data-center-board
...
WIP: boards: added datacenter DDR4 RDIMM tester board
2021-10-18 13:36:37 +02:00
enjoy-digital
a2261a1e9a
Merge pull request #280 from developandplay/master
...
Fix tang nano loopback and button
2021-10-16 09:09:39 +02:00
Gwenhael Goavec-Merou
9645a9a310
efinix_trion_xx: append device with timing model
2021-10-16 07:36:06 +02:00
Martin Troiber
a3c7446a2b
Fix tang nano loopback and button
2021-10-16 04:35:23 +02:00
Florent Kermarrec
3730d96709
litex_acorn_baseboard: Add SPIFlash support.
2021-10-15 18:22:08 +02:00
Florent Kermarrec
bdf2848208
platforms/digilent_arty: Avoid commas in spiflash4x.
2021-10-15 18:22:06 +02:00
Miodrag Milanovic
d9638c40b8
Initial support for Efinix Trion T20 BGA256 Dev Kit
2021-10-15 12:26:15 +02:00
Florent Kermarrec
195bf176cf
efinix_trion_t120_bga576: Add SPIFlash support (X1 for now).
2021-10-14 19:16:01 +02:00
Florent Kermarrec
414b3fa636
efinix_trion_t120_bga576: Add Ethernet pins of the 2 RGMII PHYs.
2021-10-14 11:51:17 +02:00
Florent Kermarrec
430918756d
efinix_trion_t120_bga576: Add PMODs connectors and use USB-UART/PMOD_E as Serial.
2021-10-14 10:10:42 +02:00
Florent Kermarrec
9145ff97d2
efinix_trio_t120_bga576: Add Switches pins.
2021-10-14 09:29:12 +02:00
Florent Kermarrec
5b4558c9b9
platforms/efinix_trion_t120_bga576: Add Buttons and Serial (other PMOD USB-UART).
2021-10-13 16:32:58 +02:00
Florent Kermarrec
a4d178a740
Add Efinix Trio T120 BGA576 Dev-Kit initial support (LedChaser).
2021-10-13 12:29:53 +02:00
Florent Kermarrec
e29bcd30a6
litex_acorn_baseboard: Add some M2 signals and set devslp to 0.
2021-10-12 11:54:17 +02:00
Florent Kermarrec
a365362f5d
Rename litex_m2_baseboard to litex_acorn_baseboard and add link to repository.
2021-10-11 18:36:12 +02:00
Florent Kermarrec
fe08491e8d
litex_m2_baseboard: Add LCD.
2021-10-11 18:30:23 +02:00
enjoy-digital
393252ddc9
Merge pull request #277 from hansfbaier/master
...
Add support for QMTech 10CL006 board
2021-10-11 14:01:06 +02:00
enjoy-digital
79fe4a9199
Merge pull request #275 from alainlou/master
...
rz_easyfpga: cleanup and ease of use
2021-10-11 13:57:06 +02:00
Florent Kermarrec
2b2c7d3d68
trellisboard: Add PMOD GPIO support (for tests with MicroPython).
2021-10-11 11:33:13 +02:00
Hans Baier
d119b598c5
Add support for QMTech 10CL006 board
2021-10-05 12:06:41 +07:00
alainlou
1b676f929a
cleanup and ease of use
...
- update README
- delete some unnecessary toolchain commands (copied from trenz boards)
- use minimal cpu_variant by default when vexriscv is selected
2021-10-03 13:21:45 -04:00
Florent Kermarrec
e8611794b4
Add initial QuickLogic QuickFeather support (Led Chaser).
...
Untested.
2021-10-01 10:58:26 +02:00
Florent Kermarrec
1858273945
mnt_rkx7: Add SPI SDCard support.
2021-09-30 18:01:54 +02:00
Florent Kermarrec
9bcae49629
mnt_rkx7: Add I2C (For the SiI9022A).
2021-09-30 15:33:53 +02:00
Florent Kermarrec
4f7c18a503
mnt_rkx7: Add Ethernet/Etherbone support.
2021-09-30 15:14:03 +02:00
Florent Kermarrec
84f0d715ff
mnt_rkx7: Add SDCard support.
2021-09-30 11:34:23 +02:00
Florent Kermarrec
31b404c42f
mng_rkx7: Add SPI Flash support.
2021-09-30 11:29:56 +02:00
Florent Kermarrec
df7fe5687e
Add initial MNT Reform Kintex-7 module (RKX7) support with Clk, UART and DDR3.
...
Compiles but untested on hardware.
2021-09-30 11:06:39 +02:00
enjoy-digital
dfa572083a
Merge pull request #273 from ozbenh/wukong-v2
...
Wukong board improvements
2021-09-28 13:22:42 +02:00
Alessandro Comodi
228245075a
boards: added datacenter DDR4 RDIMM tester board
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2021-09-27 10:15:55 +02:00
Benjamin Herrenschmidt
4a52996106
Wukong board improvements
...
This adds support for v2 of the board via a --board-version argument
and a way to select the FPGA speed grade via a --speed-grade argument.
Note that the speed grade now defaults to -1. QMTech confirmed that
V1 of the board were made in two batches, one with -1 and one with -2,
while V2 of the board is all -1. So -1 is the safer default.
This also fixes the inversion of j10 and j11 and a typo in the pin
definition of jp3
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2021-09-24 12:13:56 +10:00
enjoy-digital
f18b10d1ed
Merge pull request #249 from Quiddle11/atlys
...
Initial Digilent Atlys support
2021-09-23 10:21:49 +02:00
Florent Kermarrec
921c300b50
digilent_atlys: Simplify/Remove entropy...
...
Build tested with ./digilent_atlys.py --with-ethernet --build.
2021-09-23 10:17:54 +02:00
alainlou
1333f89ed6
rz_easyfpga: adjust SDRAM clk phase
...
- also add 1:2 rate
2021-09-22 00:26:28 -04:00
Alain Lou
610e82d774
Add initial RZ-EasyFPGA support! ( #270 )
2021-09-21 09:55:22 +02:00
Florent Kermarrec
d5eea94289
sispeed_tang_nano_4k: Avoid IOStandard constraints on HyperRAM (Not present in example designs).
2021-09-20 11:46:10 +02:00
Florent Kermarrec
5190c9c869
sipeed_tang_nano_4k: Initial Video Out support.
...
With colorbars for now, need to free up BRAMS for Video Terminal (or finish HyperRAM support).
2021-09-20 09:32:20 +02:00