37ebcd3be7
factor out busy_wait_us()
2020-08-17 18:45:24 -04:00
c4710b371a
build/lattice/trellis: make "-abc9" an optional argument
...
Fix up earlier commit (#6c298cb7) and make the '-abc9' optional
argument to yosys' synth_ecp5 actually optional (and off by default)
in LiteX's trellis build infrastructure.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-08-15 16:49:08 -04:00
35929c0f8a
soc/integration/csr_bridge: use registered version only when SDRAM is present.
...
Seems to be a good compromise for now.
2020-08-14 15:29:49 +02:00
e4f5dd987e
interconnect/wishbone/Wishbone2CSR: add registered version and use it as default.
2020-08-14 00:47:05 +02:00
b344196aba
build/lattice/diamond: use diamondc instead of pnmainc (avoid having to set environment variables).
...
http://www.latticesemi.com/en/Support/AnswerDatabase/5/5/2/5522
2020-08-14 00:10:56 +02:00
f730f1d7ba
cores/cpu/vexriscv_smp fix argument parsing
2020-08-13 12:52:05 +02:00
0e480dd662
bios/main/sdram: fix speed reporting (Mbps/pin not MHz).
2020-08-11 22:13:14 +02:00
bb7f33434e
Merge pull request #627 from gsomlo/gls-dma-addr-64
...
RFC: cores/dma, liblitesdcard/sdcard: use 64 bits for dma base address
2020-08-10 21:44:02 +02:00
ba34c85284
cores/dma, liblitesdcard/sdcard: use 64 bits for dma base address
...
Make the DMA base address register 64-bit wide, to cover situations
in which the physical memory being accessed is above the 4GB limit
(e.g., on 64-bit systems with more than 4GB of provisioned physical
memory).
Also update DMA reader/writer setup call sites in the bios (currently
only used by litesdcard).
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-08-10 14:09:25 -04:00
4cf28a0107
software/bios: display SDRAM databits and freq.
2020-08-07 19:49:02 +02:00
6f69679d21
cpu/vexriscv_smp: more coherent_dma to __init__ instead of add_memory_buses.
...
LiteX is creating the SoC.dma_bus just after the CPU is declared, so declaring it in add_memory_buses was preventing it.
It's also more coherent to move it to __init__ since not related to the memory_buses.
2020-08-07 14:47:21 +02:00
b3531cd2a8
cores/cpu: add external cpu_type.
...
Allows fully pluggable CPUs where cpu_type is set to "external" and cpu_cls provided externally.
2020-08-07 11:16:00 +02:00
b9d3aab59d
targets: use platform.request_all on LedChaser.
2020-08-06 20:02:17 +02:00
14c9166429
build/generic_platform: add request_all method.
2020-08-06 20:00:07 +02:00
57335b9971
cores/cpu/zynq7000: simplify using new loose parameter of Platform.request.
...
And avoid the try/except that can mask others errors.
2020-08-06 19:44:46 +02:00
4867f2b324
Merge pull request #624 from trabucayre/emio_zynq
...
soc/cores/cpu/zynq7000: add enet0, enet0_mdio, sdio, sdio_cd and sdio_wp only when configured in EMIO mode
2020-08-06 19:34:03 +02:00
48d63f2362
build/generic_plaform: add loose parameter to return None when not available/existing.
...
Similar to loose parameter already present on Platform.lookup_request.
2020-08-06 19:33:04 +02:00
81df7b7036
Merge pull request #625 from scanakci/blackparrot_litex
...
Blackparrot human name change (IMA), minor transducer fix
2020-08-06 18:50:39 +02:00
188e6f573a
integration/soc/add_etherbone: pass phy to ethcore not self.ethphy.
...
Similar in most of the cases but added restrictions.
2020-08-06 18:23:04 +02:00
2457859b2d
update BlackParrot transducer
2020-08-06 12:21:38 -04:00
d2dabcef9a
Blackparrot human name update
2020-08-06 12:21:38 -04:00
87c26a30fd
soc/cores/cpu/zynq7000: add enet0, enet0_mdio, sdio, sdio_cd and sdio_wp only when configured in EMIO mode
2020-08-06 16:45:39 +02:00
d5062d1f4f
Merge pull request #623 from Dolu1990/vexriscv_smp
...
cpu/vexriscv_smp Add --with-coherent-dma --without-coherent-dma
2020-08-06 14:31:20 +02:00
07a8e696ce
cpu/vexriscv_smp Add --with-coherent-dma
2020-08-06 13:33:11 +02:00
9a4c5aa1ef
integration/soc/add_sdram: update rules to connect main bus to dram.
...
Requires connection when CPU does not have memory buses of when CPU has memory buses
but no DMA bus.
2020-08-05 18:01:12 +02:00
a1644510bf
cpu/vexriscv_smp: fix args_read.
2020-08-05 17:59:30 +02:00
896b68cd6b
cpu/vexriscv_smp: cleanup, fix coherent_dma connection.
2020-08-05 17:25:13 +02:00
342f359e1c
Merge pull request #622 from antmicro/fix_connectors
...
arty: Change USB-uart and I2S Pmod configuration
2020-08-05 12:30:34 +02:00
3b293612a8
soc/interconnect/axi: minor cleanups.
2020-08-05 12:11:28 +02:00
303d6cca7e
interconnect/stream: set default AsyncFIFO depth to None and add depth parameter to ClockDomainCrossing.
2020-08-05 12:11:12 +02:00
de9ea19cc7
arty: Change USB-uart and I2S Pmod configuration
...
This makes it compatible with the Arty A7 expansion board by Antmicro
(https://github.com/antmicro/arty-expansion-board ).
2020-08-05 11:38:51 +02:00
00629c45b0
interconnect/csr: add CSR registers ordering support.
...
The original CSR registers ordering (big: MSB on lower addresses) is not convenient
when the SoC is interfaced with a real OS (for example as a PCIe add-on board or
with a CPU running Linux).
With this, the original ordering is kept as default (big), but it can now be switched
to little to avoid software workarounds in drivers and should probably be in the future
the default for PCIe/Linux SoCs.
2020-08-05 08:57:19 +02:00
ee7a7f4693
soc/interconnect/csr: improve ident.
2020-08-05 07:59:35 +02:00
b1008b0164
integration/soc: add expection on decoder when full address space is mapped.
2020-08-04 19:56:26 +02:00
b831dc8c55
wishbone: revert default adr_width to 30.
2020-08-04 19:55:46 +02:00
abc49964ea
tools/litex_json2dts: add missing copyrights.
2020-08-04 16:38:02 +02:00
aed0dcee4c
setup: add litex_json2dts to console_scripts.
2020-08-04 16:07:53 +02:00
b64209b38b
Merge pull request #620 from antmicro/add_litex_json2dts
...
Add Linux DT generation script
2020-08-04 16:04:57 +02:00
0ca99b798f
build/sim/config: add default_clk/default_clk_freq parameters for retro-compatibility with previous API.
2020-08-04 15:49:53 +02:00
696ea468b8
build/sim: use json_object_get_int64 instead of json_object_get_uint64.
...
json_object_get_uint64 does not seem supported with old json-c versions.
2020-08-04 15:49:26 +02:00
382c1a3a44
Merge pull request #619 from antmicro/jboc/sim-clocker
...
Allow to define multiple simulation clocks
2020-08-04 15:38:28 +02:00
fafa844aa7
json2dts: Add Linux DT generation script
2020-08-04 15:13:17 +02:00
f778ff09dc
build/sim: improve timebase calculation (strict checks) and update modules
2020-08-04 14:00:58 +02:00
e0f131a317
cores/uart: add txempty/rxfull CSRs.
...
Useful in some use cases, like flushing tx.
2020-08-04 13:50:46 +02:00
2a3e39b10e
tools/litex_server: enable read_merger with CommUDP.
...
Limited to 4 (current size of the buffer in liteeth.frontend.etherbone).
2020-08-04 10:55:51 +02:00
a5d0a340c3
test: specify wishbone adr_width on AXI(Lite)<-->Wishbone tests and remove debug traces.
2020-08-04 09:39:23 +02:00
eb3374d00a
Merge pull request #617 from gsomlo/gls_rocket_dma
...
RFC: enable DMA with Rocket
2020-08-04 09:38:58 +02:00
561331ed97
debug: make CI print offending values
2020-08-03 16:59:39 -04:00
df3428be07
liblitesdcard/sdcard: (temporarily) slow down SDCARD_CLK_FREQ to 25MHz
...
Rocket's DMA slave interface (and/or internal routing) currently
appears unable to route DMA writes from LiteSDCard at frequencies
above 25MHz (as tested on nexys4ddr, with Rocket, at 75MHz main
system clock frequency).
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-08-03 16:14:11 -04:00
2d9dc8f939
cores/cpu/rocket: expose slave port for DMA
...
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2020-08-03 16:14:11 -04:00
Gabriel Somlo
Florent Kermarrec
Dolu1990
sadullah
Gwenhael Goavec-Merou
Pawel Sagan
Mateusz Holenko
Jędrzej Boczar