808e1fe866
litesata: pep8 (replace tabs with spaces)
2015-04-13 14:59:00 +02:00
312f302d36
litescope/examples_designs: add build directory
2015-04-13 14:53:17 +02:00
1e1f7ce30e
liteusb: more pep8 (when convenient), should be almost OK
2015-04-13 14:47:44 +02:00
f10e873063
liteusb: pep8 (E265)
2015-04-13 14:37:39 +02:00
5343537fc2
liteusb: pep8 (E225)
2015-04-13 14:34:36 +02:00
39df1ff636
liteusb: pep8 (E222)
2015-04-13 14:32:51 +02:00
9e3d3e7930
liteusb: pep8 (E231)
2015-04-13 14:30:48 +02:00
ce0e818d66
liteusb: pep8 (E201)
2015-04-13 14:29:44 +02:00
4974fd6bc9
liteusb: pep8 (E302)
2015-04-13 14:27:31 +02:00
cb473ddb6e
liteusb: pep8 (replace tabs with spaces)
2015-04-13 14:09:58 +02:00
40abd66d69
litescope: more pep8 (when convenient), should be almost OK
2015-04-13 13:56:24 +02:00
4cdb0ddf3a
litescope: pep8 (E265)
2015-04-13 13:46:06 +02:00
8f9bd24f6f
litescope: pep8 (E261, E271)
2015-04-13 13:40:30 +02:00
eb58f45b31
litescope: pep8 (W292)
2015-04-13 13:38:35 +02:00
f16623d548
litescope: pep8 (E225)
2015-04-13 13:37:46 +02:00
7e37d7b6d0
litescope: pep8 (E222)
2015-04-13 13:29:41 +02:00
651e228e22
litescope: pep8 (E401)
2015-04-13 13:28:47 +02:00
49dcf8d831
litescope: pep8 (E203)
2015-04-13 13:25:27 +02:00
51ca259bdb
litescope: pep8 (E231)
2015-04-13 13:23:48 +02:00
67b4da8ecf
litescope: pep8 (E201)
2015-04-13 13:20:13 +02:00
13e4d7c525
litescope: pep8 (E302)
2015-04-13 13:18:21 +02:00
1328328540
litescope: pep8 (replace tabs with spaces)
2015-04-13 13:09:44 +02:00
2bd38f44a3
liteeth: more pep8 (when convenient), should be almost OK
2015-04-13 13:02:04 +02:00
154d3d3b04
liteeth: pep8 (E265)
2015-04-13 11:27:01 +02:00
45dc4920ec
liteeth: pep8 (E261, E271)
2015-04-13 11:07:50 +02:00
021a5ae8a0
liteeth: pep8 (W292)
2015-04-13 10:58:45 +02:00
a84f12618b
liteeth: pep8 (E225)
2015-04-13 10:56:18 +02:00
66ce40d880
liteeth: pep8 (E222)
2015-04-13 10:48:59 +02:00
ff2d7f9adc
liteeth: pep8 (E401)
2015-04-13 10:45:09 +02:00
726fd3ab42
liteeth: pep8 (E203)
2015-04-13 10:39:46 +02:00
8dc817dd70
liteeth: pep8 (E231)
2015-04-13 10:31:18 +02:00
9c527742cb
liteeth: pep8 (E201)
2015-04-13 10:23:33 +02:00
5720638d85
liteeth: pep8 (E302)
2015-04-13 10:20:02 +02:00
cd43eaffc2
liteeth: pep8 (replace tabs with spaces)
2015-04-13 09:53:43 +02:00
a2c17cdcef
Merge branch 'master' of https://github.com/m-labs/migen
2015-04-13 09:37:03 +02:00
afa9b889ae
liteeth/phy/gmii: fix clock generation for mii mode (clock_pads.tx is an input)
2015-04-12 22:15:45 +02:00
3710afe7fe
microudp.c: add #ifdef on ethmode (bios generation for gmii or mii was broken)
2015-04-12 20:59:50 +02:00
8e639160e3
liteeth/phy/gmii_mii: add pads registers in RX
2015-04-12 20:43:01 +02:00
0c27708b0a
liteeth/phy/gmii_mii: avoid doubling pads register on TX
2015-04-12 20:42:12 +02:00
bc81d9d639
liteeth/phy/__init__.py: add more comments
2015-04-12 18:56:46 +02:00
4abe8e1d9e
microudp: fix if (
2015-04-12 18:52:35 +02:00
515398634f
liteeth/phy/gmii_mii: add clock counter and use it in bios to select mode
2015-04-12 18:42:52 +02:00
857bee8a00
liteeth/phy: add GMII/MII phy
...
for now swicth is manual, we will need a clk counter to allow software or logic to automatically switch between GMII and MII
2015-04-12 17:25:55 +02:00
cfac3d9f5c
liteeth/phy/mii: simplify LiteEthPHYMIIRX using Converter
2015-04-12 16:03:21 +02:00
ddae41f2e4
liteeth/phy/mii: simplify LiteEthPHYMIITX using Converter
2015-04-12 15:34:56 +02:00
8c722db54e
liteeth/phy/mii: assign tx_er only if exists (as it's done on GMII)
2015-04-12 14:43:35 +02:00
4329e3e1b9
liteeth/phy/mii: allow use of MII phy on GMII/MII chips that do not have phy clock provided by the FPGA (tested on KC705)
2015-04-12 14:28:17 +02:00
c6904f9d63
sim: fix to support ConvOutput
2015-04-12 14:06:57 +08:00
93ed3212f7
timer: revert prescaler (we will in fact use a software prescaler for uIP)
2015-04-10 18:57:06 +02:00
ff23960657
fhdl/verilog: avoid reg initialization in printheader when reset is not an int.
...
We should be able to reset a signal with the value of another one. Without this change it's not possible to do so since synthesis tools do not support initializing a signal from another one.
2015-04-10 17:18:07 +02:00
Florent Kermarrec
Sebastien Bourdeauducq