Hardware/litex
1
0
Fork 0
mirror of https://github.com/enjoy-digital/litex.git synced 2025-01-04 09:52:26 -05:00
Code Issues Projects Releases Packages Wiki Activity
7765 commits 42 branches 14 tags 31 MiB
Commit graph

7765 commits

This branch
This branch
All branches
Author SHA1 Message Date
Stephane Gourichon
e47f84ea79 Unconditionally ask dfu-util to "Issue USB Reset signalling once we're finished". 
Some host machines need it.
If issuing -R always does not cause any trouble, then do it.
 2020-10-05 17:16:10 +02:00
enjoy-digital
aebe08d841
Merge pull request #661 from yetifrisstlama/fix_stream2wishbone 
Fix stream2wishbone
 2020-10-05 17:16:04 +02:00
enjoy-digital
2d6f19a816
Merge pull request #659 from shawnanastasio/toolchain-fixes 
Add riscv*-unknown-linux-gnu triples and fix existing riscv-linux-gnu triple
 2020-10-05 17:09:59 +02:00
Robert Winkler
ff4afda305 build/xilinx/symbiflow: Add xc7a100tscg324-1 to supported devices 
Signed-off-by: Robert Winkler <rwinkler@antmicro.com>
 2020-10-05 17:02:51 +02:00
Michael Betz
acdfae202b Stream2Wishbone: drive sink.ready line 2020-10-04 18:19:39 -07:00
Michael Betz
6e3e979a0b serial2tcp.c json error handling, respect rx.ready 2020-10-04 18:17:28 -07:00
Shawn Anastasio
fa82d97aa5 cores/cpu: Add riscv*-unknown-linux-gnu triple, fix riscv-linux-gnu 
Add riscv*-unknown-linux-gnu to known triples, and fix the existing
riscv-linux-gnu by removing the incorrect -gcc suffix from the
triple.
 2020-10-02 18:31:48 -05:00
Shawn Anastasio
6fd48ca2ce software: Use -fno-stack-protector 
This allows riscv*-gnu-linux toolchains to be used to build LiteX
software. Without this, references to undefined stack guard symbols
get generated and linking fails.
 2020-10-02 13:42:16 -05:00
Gabriel Somlo
c77da3a8bc RFC: json2dts: set CPU clock-frequency and SoC bus-frequency 
FIXME: timebase-frequency isn't to be used as the raw CPU clock, so
on vexriscv we might want to re-evaluate also setting *that* to the
`CONFIG_CLOCK_FREQUENCY`. Decide whether to keep the SoC's
`bus-frequency` cell, or whether to go with the CPU's `clock-frequency`
only.
 2020-10-01 06:59:45 -04:00
Florent Kermarrec
b84a858b2c CHANGES: initialize changes since last release. 2020-10-01 11:46:43 +02:00
Florent Kermarrec
ba2ff8cf71 tools/litex_sim: update get_sdram_phy_settings (rd/wrcmdphase no longer exposed as PhySettings). 2020-10-01 11:27:33 +02:00
Florent Kermarrec
2b62802961 tools/litex_sim: minor review cleanup. 2020-10-01 10:36:37 +02:00
Florent Kermarrec
23e319732c tools/litex_server: minor review cleanup. 2020-10-01 10:35:11 +02:00
Vamsi Vytla
e8c0360fa5
tools/{litex_sim, litex_server}.py: Minor clean-up (#657) 
Enable litex_server debug and create function to add for litex_sim args.
 2020-10-01 10:32:44 +02:00
Pepijn de Vos
890ccaf4bd support writing bitstream to flash 2020-10-01 08:39:32 +02:00
Florent Kermarrec
29bff18e69 software/liblitedram: add SDRAM CL/CWL printf to BIOS. 2020-09-30 19:00:12 +02:00
Florent Kermarrec
f476b32ada software/liblitedram: rename SDRAM_TEST_SIZE to MEMTEST_DATA_SIZE (since used in benchs to force test size). 2020-09-30 18:34:48 +02:00
Florent Kermarrec
f7e49cc23a software/liblitedram: add SDRAM_TEST_SIZE (2MiB as previously defined in memtest). 2020-09-30 18:02:07 +02:00
Florent Kermarrec
fdf7981f40 software/libbase/memtest: remove size restriction and don't execute memspeed. 2020-09-30 17:49:51 +02:00
Florent Kermarrec
ed21c983cb Merge branch 'master' of http://github.com/enjoy-digital/litex 2020-09-30 17:29:04 +02:00
Florent Kermarrec
c154f1cbb2 software/liblitedram: add support for dynamic read/write phase and add command to BIOS to force them. 2020-09-30 17:09:19 +02:00
enjoy-digital
6f136f9faa
Merge pull request #655 from betrusted-io/svd_memregion 
add memory regions to soc.svd
 2020-09-30 11:43:14 +02:00
enjoy-digital
96976941b4
Merge pull request #656 from kbeckmann/fix_sdram_leveling 
Fix build issue where sdram_leveling is not found
 2020-09-30 09:57:54 +02:00
Konrad Beckmann
39d144626b Fix build issue where sdram_leveling is not found 
4f76656 rewrote how sdram_leveling() was called, leading
to linking problems for targets with sdram but with
write leveling disabled, e.g. ulx3s.
 2020-09-29 22:49:41 +02:00
Florent Kermarrec
a9234a8793 software/liblitedram: allow cmd_delay adjustment even when enforced by the phy. 2020-09-29 16:02:21 +02:00
Pepijn de Vos
eca5a25e27 add dummy attr_translate 2020-09-29 15:55:07 +02:00
Florent Kermarrec
4f76656018 software/liblitedram: simplify vtc/hardware/software controls. 
- move vtc control to sdram_software_control_on/off.
- remove sdram_calibration (duplicate of sdram_leveling).
- be sure to call sdram_software_control_on/off before all litedram bios commands.
 2020-09-29 15:40:26 +02:00
Pepijn de Vos
dd2b1f21f0 typo and dead code 2020-09-29 15:24:36 +02:00
Florent Kermarrec
e4555df095 tools/litex_server/pcie: enable pcie device if not already enabledd. 
Avoid having to do it manually or through a driver.
 2020-09-29 13:38:19 +02:00
Florent Kermarrec
bc5873f78c tools/litex_server/pcie: allow passing pcie bar as reported by lspci. 
ex:
$lspci
[...]
06:00.0 RF controller: Xilinx Corporation Device 7022 (rev 01)

sudo litex_server --pcie --pcie-bar=06:00.0
 2020-09-29 13:10:05 +02:00
Florent Kermarrec
6d07f01f5b tools/litex_client/RemoteClient: allow use without local csr.csv file. 
In some case, we just want to access MMAP manually without having the csr.csv file:
wb = RemoteClient()
wb.open()
wb.read(0x40000000)
wb.close()
 2020-09-29 13:01:44 +02:00
bunnie
7b42992383 add <memoryRegions> outer tag to series of <memoryRegion> for future proofing 2020-09-29 14:11:55 +08:00
bunnie
4a94bb78f6 add memory regions to soc.svd 
svd2rust does not recognize memory regions, but we'd like to
make an access crate for Rust that does.

This patch adds memory regions to soc.svd using the "vendorExtensions"
tag, as specified in https://www.keil.com/pack/doc/cmsis/SVD/html/svd_Format_pg.html

The vendorExtensions is added as a block after the Peripherals level, and has a format
like this:

```xml
        <memoryRegion>
            <name>SRAM</name>
            <baseAddress>0x10000000</baseAddress>
            <size>0x00020000</size>
        </memoryRegion>
        <memoryRegion>
            <name>VEXRISCV_DEBUG</name>
            <baseAddress>0xEFFF0000</baseAddress>
            <size>0x00000100</size>
        </memoryRegion>
        <memoryRegion>
            <name>CSR</name>
            <baseAddress>0xF0000000</baseAddress>
            <size>0x00040000</size>
        </memoryRegion>
```
 2020-09-29 01:30:09 +08:00
Pepijn de Vos
95564b7475 change name->devicename, working bios 2020-09-28 17:49:41 +02:00
Pepijn de Vos
c0fa4fd1f4 initial build support for Gowin 2020-09-28 13:12:07 +02:00
Florent Kermarrec
a1c023b900 software/bios/cmds/cmd_litedram: enable sdram_software_control before sdram_mode_register_write. 2020-09-24 14:58:42 +02:00
Florent Kermarrec
90a2b80b6a software/liblitedram/sdram_write_leveling_rst_cmd_delay: fix printf location (do it before taps is decremented). 2020-09-24 13:54:08 +02:00
Florent Kermarrec
7617a82fe6 targets/kcu105: create specific cd_eth for ethernet. 2020-09-24 10:27:48 +02:00
Florent Kermarrec
a3c616028e software/liblitedram/sdram: fix cmd_delays -> dat_delays. 2020-09-23 19:43:28 +02:00
enjoy-digital
01528e643e
Merge pull request #652 from gsomlo/gls-sdcard-clocking 
RFC: proper way to set sdcard clock?
 2020-09-22 21:52:13 +02:00
Gabriel Somlo
8e7596d330 liblitesdcard/sdcard.c: ensure effective sdcard clock is <= requested 
With the way the clock divider is currently calculated, it is
possible for the effective sdcard clock to end up *higher* than
the requested `clk_freq` value.

Calculate the divider starting with the `CONFIG_CLOCK_FREQUENCY/clk_freq`
ratio which is then rounded up to the nearest power-of-two, ensuring
that the resulting, effective clock frequency is <= to the requested
frequency.

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
 2020-09-22 15:15:50 -04:00
Florent Kermarrec
ac32b92e9f targets/kcu105: add etherbone. 2020-09-22 18:31:06 +02:00
Florent Kermarrec
a601415bf0 software/liblitedram: add functions/commands to reset and force cmd/dat write leveling delays. 
Useful to investigate/speed-up new board support.
 2020-09-21 19:53:34 +02:00
Florent Kermarrec
a39660fa99 software/liblitedram/sdram.c: fix typo. 2020-09-17 18:19:12 +02:00
Florent Kermarrec
a0d66dd60e software/liblitesdcard/sdcard: move busy_wait in sdcard_wait_cmd_done (fixes sdcardboot being stuck since code refactoring) and reduce busy_wait value. 2020-09-17 10:52:21 +02:00
Florent Kermarrec
de4fc14cf9 software/bios/cmds/cmd_litsdcard: make sure all commands generate a report. 2020-09-17 10:41:49 +02:00
Florent Kermarrec
6c4abe2185 software/bios/cmds/cmd_liteeth: make sure all commands generate a report and improve it. 2020-09-17 09:10:58 +02:00
Florent Kermarrec
7d6818ab07 software/bios/command: avoid too much groups, reorganize a bit. 2020-09-17 09:07:36 +02:00
Florent Kermarrec
88ef2a330b software/bios/cmds/cmd_litedram: rename spdread command to sdram_spd. 2020-09-16 22:48:32 +02:00
Florent Kermarrec
3380de4adf software/bios/cmds/cmd_i2c: rename commands to i2c_xy. 2020-09-16 22:45:19 +02:00