8f92034ddd
CHANGES: update.
2020-07-22 23:10:26 +02:00
99e88dfc0b
Merge pull request #600 from antmicro/jboc/axi-lite
...
Implement AXI Lite interconnect
2020-07-22 23:03:07 +02:00
d38048baac
soc: add initial DMA bus support (optionally provided by CPU(s) for cache coherency).
...
When provided, the modules doing DMA shall connect the DMA to the dma_bus to allow the CPU(s) to manage cache coherency
and avoid the manual cache flushes.
This has been tested with VexRiscv SMP and LiteSDCard doing DMA while loading Linux binaries.
2020-07-22 18:44:37 +02:00
a9d8b81385
test/axi: move all AXI Lite tests to separate file
2020-07-22 17:16:33 +02:00
367eb12240
soc/integration: use AXILiteSRAM when using bus_standard="axi-lite"
2020-07-22 17:16:33 +02:00
8ae501c391
test/axi: add crossbar stress tests
2020-07-22 17:16:33 +02:00
706bc25dc1
soc/integration: add bus standard parser arguments
2020-07-22 17:16:33 +02:00
32d9e212c5
soc/interconnect/axi: improve Timeout module and test it with shared interconnect
2020-07-22 17:16:33 +02:00
2cab7fbf0f
test/axi: add shared AXI Lite interconnect tests
2020-07-22 17:16:33 +02:00
3a08b21d44
soc/interconnect/axi: implement AXI Lite decoder
2020-07-22 17:16:33 +02:00
214cfdcaeb
soc/interconnect/axi: lock AXILiteArbiter until all requests have been responded to
2020-07-22 17:16:33 +02:00
baf23c9c9b
test/test_axi: add AXI Lite interconnect arbiter tests
2020-07-22 17:16:29 +02:00
a8a583d6b4
socinterconnect/axi: interconnect shared sketch
2020-07-22 17:16:26 +02:00
f47ccdae99
soc/interconnect/axi: point-to-point interconnect and timeout module with tests
2020-07-22 17:16:12 +02:00
b4c1120e3d
soc/integration: choose interconnect based on bus standard
2020-07-22 17:16:07 +02:00
69d8dd788d
soc/integration: add axi-lite standard to SoCBusHandler
2020-07-22 17:13:28 +02:00
2361abb12d
Merge pull request #599 from antmicro/gen-mmcm-pr
...
litex-gen: add mmcm core
2020-07-22 14:52:26 +02:00
66c5f37133
litex-gen: add mmcm core
2020-07-22 12:34:32 +02:00
6b72f52c5d
boards: keep in sync with litex-boards.
2020-07-22 08:50:38 +02:00
1f27b7405e
soc/integration/add_sdcard: add direct connection to VexRiscv's dmabus for testing.
2020-07-21 19:54:42 +02:00
408d1a9f5d
cpu/vexriscv/system.h: update flush_cpu_dcache.
2020-07-21 19:43:00 +02:00
47ce15b431
interconnect/wishbone: add minimal UpConverter.
2020-07-21 19:35:14 +02:00
9fc488bdf6
Merge pull request #597 from antmicro/jboc/litex-buildenv-add-adapter-fix
...
Fix Vivado crash when using 1:1 wishbone.Converter
2020-07-20 23:11:01 +02:00
b92519502a
Merge pull request #595 from betrusted-io/master
...
wire up missing register bits.
2020-07-20 22:47:16 +02:00
87d7f6e72e
Merge pull request #598 from sergachev/master
...
interconnect/csr_bus: fix paged access warning
2020-07-20 19:24:21 +02:00
8656ea9b67
interconnect/csr_bus: fix paged access warning
2020-07-20 18:23:09 +02:00
07bc589c41
fix/Vivado: don't instantiate wishbone.Converter in add_adapter when not needed
...
Fixes an issue with Vivado which crashes with SIGSEGV when building litex-buildenv at:
cc003bef3a4a18b828bc
2020-07-20 15:26:21 +02:00
4a18b828bc
software/liblitesdcard/spisdcard: remove optimization on receive_block (not working on all configs) and increase max clk_freq to 20MHz.
2020-07-20 13:48:49 +02:00
100aa5a4ca
soc/cores/spi/SPIMaster: rewrite/simplify.
...
- Make sure MOSI is latched on start, MISO is stable during Xfer (last value).
- Allow clk_divider down to 2.
- improve test errors reporting with hex() on AssertEqual.
2020-07-20 10:44:18 +02:00
53a567daef
wire up missing register bits.
...
Not sure how they went missing...but just noticed them.
2020-07-19 03:00:25 +08:00
63c19ff45f
liblitesdcard/spisdcard: update comments.
2020-07-17 15:39:39 +02:00
1f34f6ef00
soc/cores/spi: make sure done and miso are synchronous.
2020-07-17 15:38:52 +02:00
754f140a9d
spisdcard: revert to 8-bit SPI, optimize spisdcardreceive_block and reduce clk to 12.5MHz for now.
2020-07-17 11:58:26 +02:00
8143f1a08b
soc/cores/spi: make sure miso is stable during xfer.
2020-07-17 11:56:27 +02:00
ac35e158c1
bios/boot: add bootargs support on netboot/sdcardboot to optionally specify r1/r2/r3/addr.
...
For example:
{
"Image": "0x40000000",
"bootargs": {
"r1": "0x12345678",
}
}
will copy Image to 0x40000000 and set r1 to 0x12345678.
By default, r1,r2,r3 are set to 0 and addr is the address if the last loaded image, so:
{
"Image": "0x40000000",
"rootfs.cpio": "0x40800000",
"rv32.dtb": "0x41000000",
"emulator.bin": "0x41100000",
}
is equivalent to:
{
"Image": "0x40000000",
"rootfs.cpio": "0x40800000",
"rv32.dtb": "0x41000000",
"emulator.bin": "0x41100000",
"bootargs": {
"r1": "0x00000000",
"r2": "0x00000000",
"r3": "0x00000000",
"addr": "0x00000000",
}
}
2020-07-16 18:12:11 +02:00
ee4b1d81a7
Merge pull request #594 from antmicro/jboc/axi-lite
...
Add AXILiteDownConverter
2020-07-16 17:56:33 +02:00
229da572ff
soc/interconnect/axi: propagate response errors in AXILiteDownConverter
2020-07-16 17:16:35 +02:00
93bcc94b53
soc/interconnect/axi: implement AXILite down-converter
2020-07-16 17:02:49 +02:00
21c48eed76
Merge pull request #593 from antmicro/jboc/axi-lite
...
Add AXILite components: AXILiteSRAM and AXILite2CSR
2020-07-16 11:56:57 +02:00
0be607dad9
soc/integration: revert `bus` argument for add_ram/add_rom
2020-07-16 10:26:12 +02:00
2700ec3ce5
soc/integration: use AXILiteConverter (dummy implementation) in add_adapter()
2020-07-15 15:59:16 +02:00
f3072d4984
soc/interconnect/axi: add connect methods for convenience
2020-07-15 15:48:40 +02:00
78a631f392
test/axi: add AXILite2CSR and AXILiteSRAM tests
2020-07-15 12:40:39 +02:00
e12bebb8e1
Merge pull request #592 from antmicro/fix-symbiflow-makefile
...
symbiflow: changed toolchain command names in Makefile
2020-07-15 12:08:21 +02:00
a5be2cd257
soc/interconnect/axi: improve SRAM/CSR access speed
2020-07-15 11:44:14 +02:00
3f7568de09
symbiflow: changed toolchain command names in Makefile
...
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2020-07-15 11:31:06 +02:00
d8a242d86f
soc/interconnect: add AXILite SRAM
2020-07-15 10:58:34 +02:00
b692b2a3f1
soc/interconnect: add AXILite2CSR bridge
2020-07-15 10:36:34 +02:00
35149c4e80
soc/integration: update add_adapter to convert between AXILite/Wishbone
2020-07-14 16:31:46 +02:00
6671eb6218
build/lattice/trellis: set default spimode to None (--spimode not passed to ecppack) as default instead of fast-read.
...
Using fast-read as default prevent loading the .bit via JTAG (see #589 ).
2020-07-13 11:55:03 +02:00
Florent Kermarrec
Jędrzej Boczar
Piotr Binkowski
Ilia Sergachev
bunnie
Alessandro Comodi