bunnie
e8c39ec3d2
add generic command processing state machine
...
facilitates page writes and sector erases
first commit, debugging now commencing
2020-10-29 05:09:18 +08:00
bunnie
37f2ebe675
add responder for type 0 cti, so that wb debug access works
2020-10-25 17:50:56 +08:00
bunnie
d23b88f739
Merge pull request #675 from enjoy-digital/spi_opi_dq_oe_dq_copi
...
soc/cores/spi_opi: expose dq/dq_copi to allow constrainting them from…
2020-10-14 18:45:13 +08:00
Florent Kermarrec
c6f7f0210a
soc/cores/spi_opi: expose dq/dq_copi to allow constrainting them from design.
2020-10-14 10:31:29 +02:00
enjoy-digital
4d553a6fc0
Merge pull request #672 from enjoy-digital/litedram_write_latency
...
Add dynamic write latency calibration to LiteDRAM.
2020-10-12 19:42:31 +02:00
Florent Kermarrec
f0abc185e1
targets/sim: update sdram (manual cmd_latency no longer needed).
2020-10-12 18:47:09 +02:00
Florent Kermarrec
bc68351475
software/liblitedram: use SDRAM_PHY_WRITE_LATENCY_CALIBRATION_CAPABLE flag.
2020-10-12 16:05:44 +02:00
Florent Kermarrec
c596135274
bios/cmd/cmd_litedram: add sdram_test command.
2020-10-12 13:52:15 +02:00
Florent Kermarrec
d4d4ca53b0
software/liblitedram/sdram.c: move activate/precharge to sdram_write_read_check_test_pattern, change second seed.
2020-10-12 13:00:44 +02:00
Florent Kermarrec
d1f04e67c5
software/liblitedram: use 2 cycles increment on write bitslip (for tCK steps).
2020-10-12 10:58:43 +02:00
Florent Kermarrec
3d5bc29dd1
software/liblitedram: add initial write latency calibration.
2020-10-09 20:04:16 +02:00
Florent Kermarrec
3518223c84
software/liblitedram: add functions to simplify read_leveling and do the test with 2 seeds.
...
Doing the test with 2 seeds prevents the test to success if previous content in DRAM was
still the expected one (ex after a sdram_cal command that succeded).
2020-10-09 15:50:44 +02:00
Florent Kermarrec
69177c9251
software/liblitesdram: add initial support for write leveling bitslip (configurable via bios commands).
2020-10-08 19:38:57 +02:00
Florent Kermarrec
004924a319
soc/interconnect/csr: expose re on CSRStatus (to allow triggering actions on CSRStatus writes).
2020-10-08 11:34:57 +02:00
Florent Kermarrec
b904aa7d18
libbase/memtest: simplify logs and add test size to memtest/memspeed banner.
2020-10-08 09:11:28 +02:00
Florent Kermarrec
e4fe0d9ef4
soc/cores/spi_flash: fix with_bitbang=False compilation.
2020-10-07 19:32:10 +02:00
Florent Kermarrec
375b6f2dc7
soc/cores/spi_flash: fix Dual mode compilation.
2020-10-07 19:28:13 +02:00
Florent Kermarrec
a2b71fde4a
soc: change default CSR bus data-width to 32.
...
A CSR bus data-width of 32 has been validated on very various design and is
now recommended. It provides better performance without impacting resource
usage (even on iCE40).
2020-10-07 16:38:49 +02:00
Florent Kermarrec
4f30a5b8e5
libbase/memtest: add memtest_data_speed function that prints speed in B/KiB/MiB/GiB/s depending the value.
2020-10-07 13:01:14 +02:00
Florent Kermarrec
0a80e4c3d6
libbase/memtest: revert previous printf (the informations are provided below and this make it too verbose).
2020-10-07 12:42:58 +02:00
enjoy-digital
5e2a4efac6
Merge pull request #665 from fidergo-stephane-gourichon/more_precise_log
...
More precise memory performance test.
2020-10-07 12:38:44 +02:00
enjoy-digital
83b4447f0e
Merge pull request #662 from fidergo-stephane-gourichon/dfu-util_with_-R
...
Unconditionally ask dfu-util to "Issue USB Reset"
2020-10-07 12:37:53 +02:00
Florent Kermarrec
305092c7b8
test/test_icap: update.
2020-10-07 12:36:08 +02:00
Florent Kermarrec
ad7671f811
soc/cores/icap/ICAP: add with_csr parameter and add_reload method to allow reloading the FPGA from the logic.
2020-10-06 17:38:39 +02:00
enjoy-digital
42025dcbfa
Merge pull request #666 from gsomlo/gls-sdcard-cd
...
bios: add command returning card-detect pin status
2020-10-06 10:31:25 +02:00
Gabriel Somlo
026d40ffab
bios: add command returning card-detect pin status
2020-10-05 14:32:06 -04:00
enjoy-digital
6916674ff6
Merge pull request #664 from antmicro/symbiflow_a100T
...
build/xilinx/symbiflow: Add xc7a100tscg324-1 to supported devices
2020-10-05 19:25:18 +02:00
enjoy-digital
81257da9b4
Merge pull request #663 from fidergo-stephane-gourichon/fix_crash_on_minimal_cpu
...
Fix SoC CPU crash on minimal variants on call to flush_cpu_dcache().
2020-10-05 19:24:43 +02:00
enjoy-digital
1a603b3fee
Merge pull request #654 from pepijndevos/gowin
...
Build support for Gowin
2020-10-05 19:23:47 +02:00
Stephane Gourichon
f71275a3f1
Show speeds in bytes per second.
...
Forcing megabytes per second for everyone does not make sense.
Showing bytes per second allows to distinguish between low performance and a performance measurement bug.
Anyway previous code claims speeds were in MiB/s, they were not, actually MB/s.
2020-10-05 18:46:05 +02:00
Stephane Gourichon
cbbbb3f468
Only display write speed if write test actually performed.
2020-10-05 18:43:45 +02:00
Stephane Gourichon
5b0ced00b5
Confirm parameters in log.
2020-10-05 17:58:44 +02:00
Stephane Gourichon
48638f936b
Fix SoC CPU crash on minimal variants on call to flush_cpu_dcache().
...
Generated soc.h says for example
but code tester for CONFIG_CPU_VARIANT_MIN not MINIMAL.
Attempted to run instruction unknown to this CPU, most likely cause of hang.
2020-10-05 17:16:35 +02:00
Stephane Gourichon
e47f84ea79
Unconditionally ask dfu-util to "Issue USB Reset signalling once we're finished".
...
Some host machines need it.
If issuing -R always does not cause any trouble, then do it.
2020-10-05 17:16:10 +02:00
enjoy-digital
aebe08d841
Merge pull request #661 from yetifrisstlama/fix_stream2wishbone
...
Fix stream2wishbone
2020-10-05 17:16:04 +02:00
enjoy-digital
2d6f19a816
Merge pull request #659 from shawnanastasio/toolchain-fixes
...
Add riscv*-unknown-linux-gnu triples and fix existing riscv-linux-gnu triple
2020-10-05 17:09:59 +02:00
Robert Winkler
ff4afda305
build/xilinx/symbiflow: Add xc7a100tscg324-1 to supported devices
...
Signed-off-by: Robert Winkler <rwinkler@antmicro.com>
2020-10-05 17:02:51 +02:00
Michael Betz
acdfae202b
Stream2Wishbone: drive sink.ready line
2020-10-04 18:19:39 -07:00
Michael Betz
6e3e979a0b
serial2tcp.c json error handling, respect rx.ready
2020-10-04 18:17:28 -07:00
Shawn Anastasio
fa82d97aa5
cores/cpu: Add riscv*-unknown-linux-gnu triple, fix riscv-linux-gnu
...
Add riscv*-unknown-linux-gnu to known triples, and fix the existing
riscv-linux-gnu by removing the incorrect -gcc suffix from the
triple.
2020-10-02 18:31:48 -05:00
Shawn Anastasio
6fd48ca2ce
software: Use -fno-stack-protector
...
This allows riscv*-gnu-linux toolchains to be used to build LiteX
software. Without this, references to undefined stack guard symbols
get generated and linking fails.
2020-10-02 13:42:16 -05:00
Florent Kermarrec
b84a858b2c
CHANGES: initialize changes since last release.
2020-10-01 11:46:43 +02:00
Florent Kermarrec
ba2ff8cf71
tools/litex_sim: update get_sdram_phy_settings (rd/wrcmdphase no longer exposed as PhySettings).
2020-10-01 11:27:33 +02:00
Florent Kermarrec
2b62802961
tools/litex_sim: minor review cleanup.
2020-10-01 10:36:37 +02:00
Florent Kermarrec
23e319732c
tools/litex_server: minor review cleanup.
2020-10-01 10:35:11 +02:00
Vamsi Vytla
e8c0360fa5
tools/{litex_sim, litex_server}.py: Minor clean-up ( #657 )
...
Enable litex_server debug and create function to add for litex_sim args.
2020-10-01 10:32:44 +02:00
Pepijn de Vos
890ccaf4bd
support writing bitstream to flash
2020-10-01 08:39:32 +02:00
Florent Kermarrec
29bff18e69
software/liblitedram: add SDRAM CL/CWL printf to BIOS.
2020-09-30 19:00:12 +02:00
Florent Kermarrec
f476b32ada
software/liblitedram: rename SDRAM_TEST_SIZE to MEMTEST_DATA_SIZE (since used in benchs to force test size).
2020-09-30 18:34:48 +02:00
Florent Kermarrec
f7e49cc23a
software/liblitedram: add SDRAM_TEST_SIZE (2MiB as previously defined in memtest).
2020-09-30 18:02:07 +02:00