5977a6fca0
phy/kusddrphy: remove comment on idelaye3 initial delay since fully covered by software
2017-07-10 13:59:24 +02:00
86b0cc0a56
frontend/bist: restrict lfsr to 32 bit allow bist with large ddram
...
msbs data are then filled with zeros, but we should fix lfsr generation to avoid this
2017-07-10 12:02:13 +02:00
33ca8d604e
frontend/bist: use bytes for base and length parameters
2017-07-10 10:02:41 +02:00
7b31005bc4
phy/kusddrphy: fix input bit ordering, working :)
2017-07-08 18:46:53 +02:00
99fe71d622
phy/kusddrphy: revert delays control and add comments for initial delays values
2017-07-08 10:54:02 +02:00
aad2f92b33
phy/kusddrphy: IOBUF incorrect behaviour fixed by upgrading vivado to 2017.2...
2017-07-08 10:13:58 +02:00
a72ba87f3e
phy/kusddrphy: use fixed delays for initial board test, identify strange behaviour of IOBUF...
2017-07-08 09:41:08 +02:00
7ea734381e
phy/kusddrphy: phy has been simulated, remove from TODO
2017-07-07 09:03:54 +02:00
b21a9d8e18
phy/kusddrphy: add phy reset (just to be sure primitives are correctly reseted, will be removed if not needed)
2017-07-07 09:02:58 +02:00
fa3535f7c0
phy/kusddrphy: verify latencies with simulation
2017-07-06 19:21:38 +02:00
abf028e0be
global: reset_less optimizations
2017-07-01 11:18:05 +02:00
67df00bcac
frontend/bist: use new reset_less attribute where possible
2017-06-29 11:20:08 +02:00
c8713bfb48
litedram/frontend/bist: cleanup and add ticks counters to measure performance with hardware
2017-06-29 10:41:34 +02:00
6091c6de60
frontend: remove fifo, too complex to get working and too many corner cases (data stuck in pipeline, ...)
2017-06-28 12:30:59 +02:00
369e9308b9
frontend/fifo: simplify and only keep raw layout
2017-06-27 17:24:32 +02:00
883e97101a
common: add id to ports
2017-06-27 15:06:12 +02:00
9ce2f67bb1
frontend: add dram fifo (untested)
2017-06-23 22:00:49 +02:00
bab0150c87
README: consistency between projects
2017-06-22 16:57:14 +02:00
25d5674f33
test: remove test_bitslip (now in litex)
2017-04-24 18:49:20 +02:00
3fe29ddacc
phy: BitSlip now integrated in LiteX
2017-04-19 09:58:27 +02:00
767b0144eb
modules: add MT41J256M16
2017-03-14 20:59:02 +01:00
ddb05b92b6
phy/kusddrphy: test implementation and fixes
2017-03-14 09:20:06 +01:00
c04c288e66
phy/kusddrphy: fix OSERDESE3/ISERDESE3 data ports
2017-03-09 10:54:53 +01:00
98d9f1ffc0
test/test_bitslip: simplify BitSlipModel
2017-02-10 13:18:11 +01:00
cd83448f8e
README: update copyright
2017-02-10 13:08:09 +01:00
63434324e6
phy/kusddrphy: add TODO
2017-02-10 13:05:49 +01:00
ac43e0118e
phy/x7ddrphy: ease understanding of read latency loop range
2017-02-10 12:57:08 +01:00
478b8c1df3
phy/kusddrphy: integrate BitSlip module (in fabric) and instanciate ISERDESE3
2017-02-10 12:51:30 +01:00
c94b1e7d0a
phy: cleanup instances indentation
2017-02-10 10:06:31 +01:00
062177502b
phy: add bitslip module (we need to implement it in logic for Kintex Ultrascale since not provided by ISERDESE3)
2017-02-10 08:59:13 +01:00
1430cb3d49
phy: add initial Kintex Ultrascale PHY (incomplete)
...
Input deserializer still missing, need to implement bitslip in logic and use new fifo interface.
Others primitives should be fine.
2017-02-09 13:25:45 +01:00
99550968e7
test: move BISTDriver to common and use it in test_bist_async
2017-01-17 15:18:10 +01:00
1bcab6303d
setup.py: add test_suite
2017-01-17 15:17:21 +01:00
d213a628f8
test/test_bist: use generator to corrupt memory (allow testing base address on checker/generator)
2017-01-17 14:35:34 +01:00
40168db0b4
test/test_bist: create BISTDriver to simplify test code
2017-01-17 14:31:24 +01:00
4f51524921
frontend/bist: rename err_count to errors
2017-01-17 14:30:23 +01:00
c56f90e865
test/test_bist: simplify and test modules directly not through CSR
2017-01-17 14:14:50 +01:00
e7fe539c73
frontend/bist: remove LiteDRAMBISTCheckerScope.
...
Checker should not be used to investigate errors but only to verify that is already validated still works. (ie we don't want to be able to understand what is going on, just to know if it's working or not). To understand what is going on we will look at signals with LiteScope and eventually trigger on err_count from checker.
2017-01-17 13:48:03 +01:00
ad304c8997
test: convert to python unittests and some cleanup
2017-01-17 13:18:11 +01:00
53d11cf7e3
Merge pull request #5 from mithro/scope
...
Creating a utility module for easily scoping the LiteDRAMBISTChecker module.
2016-12-24 15:16:36 +01:00
c142db3966
Creating a utility module for easily scoping the LiteDRAMBISTChecker module.
2016-12-19 17:49:24 +01:00
aac61f346e
test: start fixing bist_tb
2016-12-17 19:24:12 +01:00
0f151c5499
frontend/bist: small cleanup
2016-12-17 19:22:56 +01:00
a613c49783
frontend/bist: cleanup the way we expose signals for debugging
2016-12-17 19:04:58 +01:00
c090593e52
Merge pull request #3 from mithro/bist
...
Improve the BIST testbench and documentation
2016-12-17 18:33:38 +01:00
e21b45b608
Merge remote-tracking branch 'upstream/master' into bist
2016-12-17 18:15:59 +01:00
bc75d4f3d5
bist: Reworking as suggested by Florent.
2016-12-17 17:49:47 +01:00
5909e5d76e
frontend/bist: refactor(simplify) LiteDRAMBISTChecker
2016-12-17 17:08:50 +01:00
381789c84d
frontend/bist: refactor(simplify) LiteDRAMBISTGenerator, use start instead of shoot
2016-12-17 16:38:59 +01:00
70a333628b
dma: Adding some documentation.
2016-12-17 14:09:50 +01:00
Florent Kermarrec
Tim 'mithro' Ansell