9531af62a7
Merge pull request #166 from VOGL-electronic/fix_etherbone
...
Fix etherbone reads
2024-08-19 09:26:25 +02:00
964df3ac2f
phy/a7_gtp: Add separators and remove __all__.
2024-08-19 09:24:34 +02:00
c04ac8f698
Merge pull request #164 from VOGL-electronic/optional_liteiclink
...
Only import liteiclink when required
2024-08-19 09:17:01 +02:00
d4fa6a2f4a
phy/a7_gtp: Add additionnal comment to #163 and express delay in us.
2024-08-19 09:16:20 +02:00
32df4523ba
Merge pull request #163 from cyntem/patch-1
...
Update a7_gtp.py transceiver resets have to stay low for 10us.
2024-08-19 09:14:05 +02:00
7b4429e814
Fix etherbone reads
...
Since https://github.com/enjoy-digital/litex/pull/1999 , etherbone reads
might result in garbage being output. This is caused by `be` not being
set during the read.
Fixes https://github.com/enjoy-digital/litex/issues/2031
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
2024-08-18 17:20:05 +02:00
da6e053f78
mac: implement mac filtering for logic interface in hybrid mode
2024-07-22 12:57:44 +02:00
85c3ab2c51
Only import liteiclink when required
...
As liteiclink is only used in the phy implementations of a few Xilinx/AMD
FPGAs, it does not make sense that it would be required to build liteeth
for any FPGA.
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
2024-07-14 22:36:26 +02:00
4653a09aec
Update a7_gtp.py
...
After testing several boards with XC7A200T chips, I found, that SFP works well only with setting more than 10us. The most of the XC7A200T chips works with 500ns, but some boards need 10us.
2024-07-14 20:05:00 +03:00
583137eaf3
phy/1000basex: Use pll.config["d"] to compute TX_PROGDIV_CFG/RX_PROGDIV_CFG to fix behavior with 200MHz ref_clk_freq.
2024-07-10 16:21:11 +02:00
e0f053e7a2
bench: Set margin to 0 on 1000/2500BaseX reference clock generation.
2024-07-10 15:39:04 +02:00
08c10774b5
phy/xgmii: Switch to LiteXModule and some cleanups.
2024-07-10 11:56:08 +02:00
ec7320f003
mac/wishbone: Fix ntxslots/nrxslots == 1 case.
...
Previously, a common decoder was used for TX and RX slots, so there were at least
two interfaces connected. With the TX/RX decoupling, we now only have on interface
per decoder when ntxslots/nrxslots == 1.
2024-07-02 13:50:06 +02:00
a00640bf67
liteeth/mac/sram: Switch to LiteXModule.
2024-06-26 15:44:30 +02:00
e4f5385ef1
Merge pull request #161 from enjoy-digital/wishbone_tx_rx_buses
...
mac/wishbone/LiteEthMACWishboneInterface: Expose separate TX/RX Wishb…
2024-06-25 19:04:38 +02:00
a118dd146f
liteeth/gen: Update MACCore with EthMAC changes.
2024-06-25 18:53:46 +02:00
80bded4ffc
liteeth/mac/wishbone: Fix write_only mode on RX.
2024-06-25 18:26:20 +02:00
ec05e9c35c
liteeth/mac/wishbone: Update copyrights.
2024-06-25 18:17:02 +02:00
0e3e645b44
test/test_mac_wishbone: Update with TX/RX slot changes.
2024-06-25 18:16:47 +02:00
591b77e991
mac/wishbone: Switch to LiteXModule.
2024-06-25 17:57:16 +02:00
20e892c214
mac/wishbone: Add _expose_wishbone_sram_interfaces to avoid duplicating code between TX and RX.
2024-06-25 17:56:12 +02:00
151b421a2c
mac/wishbone/LiteEthMACWishboneInterface: Expose separate TX/RX Wishbone buses to allow simultaneous TX/RX SRAM accesses.
...
Useful in some designs to optimize throughput.
2024-06-25 17:36:18 +02:00
7d24ac33ae
version: Bump to 2024.04.
2024-06-05 22:07:12 +02:00
e209a1c697
Merge pull request #160 from whiteb3ar/master
...
phy/ecp5rgmii.py: In-Band Status CSRField("clock_speed") size fixed
2024-04-14 08:26:23 +02:00
0e8079a9da
phy/ecp5rgmii.py: In-Band Status CSRField("clock_speed") size fixed
2024-04-14 00:37:31 +03:00
a0d59dd264
frontend/stream/LiteEthStream2UDPTX: Condition source.last_be to source.last.
2024-04-11 10:47:02 +02:00
79ccffcfa7
mac/crc: Revert 30e66a7 (introducing a regression).
2024-04-08 17:51:53 +02:00
421e008fc8
mac/crc: Cosmetic cleanup.
2024-04-05 09:20:28 +02:00
fb407ce98b
core/ip/LiteEthIPTX: Enable buffer to ease timings on checksum.
2024-04-04 17:58:30 +02:00
b5d7ba1220
core/udp: Revert TX/RX Buffer since not helping (at least for now).
2024-04-04 17:52:43 +02:00
211cdc26f3
core/ip: Add optional input buffer on LiteEthIPTX to improve timings.
2024-04-04 17:26:54 +02:00
30e66a7e21
mac/crc/LiteEthMACCRC32: Avoid multiple XORs/Checks on output.
2024-04-04 16:39:32 +02:00
3e8103996f
mac/crc/LiteEthMACCRC32Inserter: Switch crc_packet/last_be to reset_less for timings.
2024-04-04 16:17:36 +02:00
b7443f5fd3
gen/mac: Allow 16-bit data_width.
2024-04-04 13:36:16 +02:00
c18cfb8bc0
core/arp/LiteEthARPTX: Simplify last_be generation.
2024-04-04 13:35:57 +02:00
d5ba0d21ef
frontend/etherbone: Enable TX/RX buffer on UDP Port when requesting it (and others cosmetic cleanups).
2024-04-04 13:09:17 +02:00
d558122251
core/udp: Allow adding TX/RX Buffer on interface to improve/cut timings.
2024-04-04 13:08:25 +02:00
c250bb1485
mac/crc/LiteEthMACCRC32Inserter: Simplify crc.ce logic.
2024-04-04 13:06:59 +02:00
3c1f4dbf6c
phy/a7_gtp: Allow using GTGREFCLK0/1 input as reference clocks.
...
Useful when reference clock is generated from a PLL or MMCM.
2024-04-04 10:50:47 +02:00
c1dc02093d
Merge pull request #158 from enjoy-digital/crc_cleanup
...
CRC cleanups.
2024-03-26 12:41:30 +01:00
bbdd6835aa
mac/crc: Cleanup and try to move data-path connection outside of FSM for timings.
2024-03-26 11:55:13 +01:00
b22ac619ab
mac/crc: Avoid dummy CRC classes since we only have one CRC Engine implementation.
2024-03-26 11:36:43 +01:00
95ff76867f
mac/crc: Rename dw to data_width.
2024-03-26 11:30:07 +01:00
01abb2a60f
mac/crc/LiteEthMACCRC32: Rename last_be to be and add comments.
2024-03-26 11:28:09 +01:00
5fad30cbc9
mac/crc/LiteEthMACCRC32: Simplify last_be using reset value and merge for loops.
2024-03-26 11:07:06 +01:00
d9f7ae4882
mac/crc: Another cleanup pass.
2024-03-26 10:50:49 +01:00
aded91f8cb
mac/crc: Add optmize_xors method and better signal names.
2024-03-26 10:25:22 +01:00
1720050729
mac/crc: Switch to LiteXModule, LiteX's Reduce and avoid OrderedDict (no longer required).
2024-03-26 09:59:22 +01:00
4af0c77371
phy/a7_1000basex: Switch txoutclk buffer to BUFG.
2024-03-25 16:00:39 +01:00
292551a0f1
phy/a7_1000basex: Add parameters to allow selecting TX/RX Clock Managment Modules (PLL or MMCM) and buffer types.
...
This is useful when using multiple instance in the design to optimize/select resources and allow build.
2024-03-22 12:28:24 +01:00
enjoy-digital
Matthias Breithaupt
cyntem
Andrei Novysh