Commit Graph

642 Commits

Author SHA1 Message Date
Florent Kermarrec 016d75512f test/test_targets: update, remove RUNNING_ON_TRAVIS. 2021-01-04 14:35:45 +01:00
Florent Kermarrec fe67766fb7 targets/gensdrphy/halfsdrphy: pass new optional sys_clk_freq (used to compute cl). 2021-01-04 11:38:07 +01:00
Florent Kermarrec 0e3c03f2f6 mercury_xu5: remove unneeded cmd_latency=0 (now defaulting to 0). 2021-01-04 10:48:34 +01:00
Florent Kermarrec 5cc49bafbd orangecrab: Run reset_timer with por/48MHz clock domain (sys clock domain is now directly reseted on usr_btn press). 2021-01-04 09:42:05 +01:00
Florent Kermarrec 1fb24d4c71 orangecrab: Avoid usb clock domain reset on usr_btn press or SoC reset.
Allows the USB-ACM link to stay up during reset.
2021-01-04 09:05:19 +01:00
Florent Kermarrec 06cb49af37 targets/arty: add variant support through --variant args.
./arty.py --variant=a7-35 or a7-100
./arty_s7.py --variant=s7-50 or s7-25
2020-12-29 18:43:14 +01:00
Florent Kermarrec 02a81d54e2 targets/ecpix5/eth: set rx_delay to 0ns (tested with netboot on R01). 2020-12-29 16:01:12 +01:00
Florent Kermarrec 93779ecb95 platforms/colorlight_5a_75b: revert toolchain args.
Useful to do tests with Diamiond.
2020-12-29 14:22:42 +01:00
enjoy-digital f2985f1e71
Merge pull request #141 from la6m/Colorlight_v8.0
add colorlight v8.0 PCB
2020-12-29 14:20:29 +01:00
Florent Kermarrec 84098d2de5 targets/qmtech_wukong: submitted target was the platform file, update with target shared in #133.
Build tested with /qmtech_wukong.py --with-sdcard --with-ethernet --integrated-rom-size=0x10000 --build.
2020-12-29 14:13:11 +01:00
Florent Kermarrec b67b18caad qmtech_wukong: review/cleanup platform. 2020-12-29 14:10:49 +01:00
la6m 3e6b934961 add colorlight v8.0 PCB 2020-12-29 13:52:13 +01:00
Florent Kermarrec e380f24655 targets/qmtech_wukong: +x. 2020-12-29 13:24:41 +01:00
Shinken Sanada 4b721eded7 add QmTech Wukong board support. 2020-12-29 13:20:42 +01:00
Florent Kermarrec 9beaf25822 nexys4ddr: fix eth/int_n pin (B8) and use 4-bit on vga.blue. 2020-12-24 10:15:29 +01:00
enjoy-digital 4162fb9945
Merge pull request #136 from devobliquezer0/nexys4ddr_vga
nexys4ddr: add support for litexvideo VGA Terminal
2020-12-24 10:09:32 +01:00
Sahaj Sarup 2a04c5c74e nexys4ddr: add support for litexvideo VGA Terminal
This commit adds VGA support for the Nexys A7/ Nexys 4 DDR.

The VGA is however limited to RGB443 instead of the full 12bit RGB444.
This is because IO D8 which is MSB for Blue, is also used for ETH int_n.
This makes the final output have a yellow tint.
2020-12-23 02:24:18 +05:30
enjoy-digital 36b7fb1033
Merge pull request #134 from Disasm/fix-orangecrab
Fix FPGA reset logic for orangecrab target
2020-12-21 08:27:26 +01:00
Vadim Kaushan f6a106cdf4
Fix orangecrab target 2020-12-20 01:07:43 +03:00
Florent Kermarrec e1f9fd1a25 README: update and center banner. 2020-12-17 18:55:13 +01:00
Florent Kermarrec 00fc2c5166 targets/orangecrab: use new DM remapping capability of LiteDRAM to fix LDM/UDM.
Required by VexRiscv-SMP that uses DMs on LiteDRAM interface.
2020-12-16 11:52:58 +01:00
enjoy-digital 6ece97ec59
Merge pull request #132 from Disasm/fix-de10nano
Fix de10nano target
2020-12-14 19:39:20 +01:00
Vadim Kaushan bb58258fd4
Fix de10nano target 2020-12-14 15:27:33 +03:00
Florent Kermarrec ec4ccc9fa5 platforms/xcu1525: fix ddram 1/2/3 pinout.
DDR4 now validated successfully with LiteDRAM on the 4 channels.
2020-12-11 13:58:26 +01:00
Florent Kermarrec 519f9449fa targets/sds1104: litex_term now directly supports crossover uart. 2020-12-10 13:56:01 +01:00
enjoy-digital 3463e3be49
Merge pull request #131 from antmicro/sync_arty
Sync Arty Board files with main LiteX repository
2020-12-07 21:43:34 +01:00
Robert Winkler 18337cdf25 targets/arty: sync with litex repository
Signed-off-by: Robert Winkler <rwinkler@antmicro.com>
2020-12-07 17:32:40 +01:00
enjoy-digital 0b8a01f929
Merge pull request #130 from antmicro/fix-zybo-clock-pin
zybo_z7: fix clock pin constraint
2020-12-07 17:13:40 +01:00
Alessandro Comodi f66860c201 zybo_z7: fix clock pin constraint
Signed-off-by: Alessandro Comodi <acomodi@antmicro.com>
2020-12-07 16:46:20 +01:00
enjoy-digital 26d3b57243
Merge pull request #129 from geertu/master
targets/orangecrab: Fix --sdram-device help text
2020-12-04 14:53:48 +01:00
Geert Uytterhoeven 8e5f955e4e targets/orangecrab: Fix --sdram-device help text
Obviously --sdram-device takes the SDRAM device, not the ECP5 FPGA
device.

Fixes: bf3c9dc9bf ("orangecrab: Add sdram selection option")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-12-04 14:34:01 +01:00
Florent Kermarrec fe563baec7 targets/fomu: modification to ValentyUSB no longer required.
Following commits make it generic/portable while still using IOBuffers:
77b9d01058
371526e432
2020-11-27 19:40:45 +01:00
Florent Kermarrec 5a4e28d47d target/usb_acm: switch git clone to litex-hub/valentyusb repo (up to date with LiteX). 2020-11-27 18:53:45 +01:00
enjoy-digital 20903da54a
Merge pull request #128 from trabucayre/redpitaya_support
add support for redpitaya14/16
2020-11-26 08:30:23 +01:00
Gwenhael Goavec-Merou 8d1095224f add support for redpitaya14/16 2020-11-26 06:54:11 +01:00
enjoy-digital b3315bd309
Merge pull request #127 from daveshah1/nexus-toolchain
nexus: Allow selection of toolchain
2020-11-25 19:22:28 +01:00
David Shah 11fa5c34ac nexus: Allow selection of toolchain
Signed-off-by: David Shah <dave@ds0.me>
2020-11-25 09:45:25 +00:00
Florent Kermarrec b9d9af3183 ci: switch from Travis CI to Github Actions. 2020-11-24 14:01:23 +01:00
Florent Kermarrec 159a0c751c targets/colorlight_5a_75x: update instructions and LiteEthPHYRGMII's tx_delay (required with LiteEth fixes). 2020-11-23 12:30:36 +01:00
Florent Kermarrec 03bb929f27 colorlight_5a_75x: add LedChaser. 2020-11-23 10:14:20 +01:00
Florent Kermarrec d18deef10d colorlight_5a_75x: switch prog to FT232 based programmer (ex: JTAG HS2). 2020-11-23 10:13:57 +01:00
enjoy-digital ee50c3e8ae
Merge pull request #124 from antmicro/jboc/mercury-xu5
mercury_xu5: reduce cmd_latency to fix problems with DRAM leveling
2020-11-20 19:37:41 +01:00
Jędrzej Boczar ce38cff41d mercury_xu5: reduce cmd_latency to fix problems with DRAM leveling 2020-11-20 15:31:47 +01:00
enjoy-digital a2f3add24e
Merge pull request #123 from teknoman117/litefury
Support for the RHS Research LiteFury
2020-11-20 08:44:27 +01:00
Nathaniel R. Lewis 389b623fe2 targets/litefury: new target
LiteFury is an Artix-7 development board in the M.2 form factor
for PCIe accelerator development. It's similar to the Aller but
with an xc7a100t rather than an xc7a200t and no TPM module.

https://rhsresearch.com/collections/rhs-public/products/litefury
2020-11-19 21:52:14 -08:00
Florent Kermarrec 49e1c34dfd targets/acorn_cle_215: add SATA. 2020-11-18 19:14:18 +01:00
Florent Kermarrec 778ce53865 targets/xcu1525: add SATA. 2020-11-17 15:27:42 +01:00
Florent Kermarrec 27e19644f4 targets/kcu105: add SATA. 2020-11-16 18:44:18 +01:00
Florent Kermarrec 27f60b2e93 add initial Siglent SDS1104X-E support (Ethernet & DDR3 validated).
Pinout from https://github.com/360nosc0pe project.
2020-11-13 12:20:15 +01:00
Florent Kermarrec d42af3ea19 targets: add --sys-clk-freq support to all targets. 2020-11-12 18:07:28 +01:00