Commit Graph

1966 Commits

Author SHA1 Message Date
Hans Baier 2f13decc49 stlv7325: make VCCIO configurable 2023-04-07 09:27:03 +07:00
Hans Baier 566a753dd3 stlv7325: S7PLL is enough 2023-04-07 08:45:06 +07:00
Hans Baier 7c99f0758d stlv7325: fix video args 2023-04-07 08:35:49 +07:00
Hans Baier 66cbd27bbf stlv7325: fix video PHY 2023-04-07 08:25:59 +07:00
Hans Baier abd639ba9e stlv7325: add 2.54mm headers 2023-04-07 08:21:17 +07:00
Hans Baier 3f85e4ae62 stlv7325: add BTB connectors 2023-04-07 08:09:27 +07:00
Hans Baier b3e44324d1 sitlinv_stlv7325: add FMC connector 2023-04-07 07:56:27 +07:00
Hans Baier 5067a2683f sitlinv_stlv7325: add video HDMI, enable compressed bitstream 2023-04-07 07:31:42 +07:00
Hans Baier 43ce24dcb3 add QMTech 5CEFA5 Cyclone V board support 2023-04-06 18:27:51 +07:00
Florent Kermarrec ae3d5d599b sqrl_fk33: Remove es1 workaround now that recent version of Vivado support it non-es devices. 2023-04-04 18:11:38 +02:00
enjoy-digital a4925d14f9
Merge pull request #488 from Icenowy/stlv7325-s7pll
sitlinv_stlv7325: use S7PLL instead of S7MMCM for system clock
2023-04-04 08:22:16 +02:00
enjoy-digital e4c1d5725e
Merge pull request #489 from gsomlo/gls-nexys-video-sata-cleanup
targets/nexys-video: simplify sata configuration
2023-04-04 08:20:37 +02:00
Gabriel Somlo 1b9a74bf08 targets/nexys-video: simplify sata configuration
Make nexys-video SATA configuration similar to the way it is supported
on the majority of other SATA-capable targets.

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
2023-04-03 12:28:12 -04:00
Icenowy Zheng b1107e94d4 sitlinv_stlv7325: use S7PLL instead of S7MMCM for system clock
As we do not need fine phase tweaking for the main system clock, use
S7PLL instead of S7MMCM to allow higher VCO frequency and more flexible
sys_clk_freq.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-04-03 16:45:13 +08:00
enjoy-digital e11d40a249
Merge pull request #487 from ICE-V-Wireless/master
Add PMOD registrations to ICE-V Wireless
2023-04-02 11:44:02 +02:00
enjoy-digital 3424a1e7e0
Merge pull request #486 from hansfbaier/master
fix HDMI I2S voltage on terasic DECA
2023-04-02 11:43:35 +02:00
Michael Welling 5de47baa44 Add PMOD registrations to ICE-V Wireless
Signed-off-by: Michael Welling <mwelling@ieee.org>
2023-04-02 03:31:55 -05:00
Hans Baier 66e8553c49
Merge branch 'litex-hub:master' into master 2023-04-01 12:02:21 +07:00
Hans Baier f564f80826 terasic_deca: hdmi i2s uses 1.8V, not 3.3V 2023-04-01 08:14:09 +07:00
enjoy-digital 33c4657cc4
Merge pull request #485 from hansfbaier/master
QMTech Artix7 boards: DDR3 RAM works on 1.5V, not 1.35V
2023-03-28 23:16:54 +02:00
Hans Baier 74c8569a5c DDR3 RAM works on 1.5V, not 1.35V 2023-03-27 15:17:42 +07:00
Florent Kermarrec 3308b6ddf3 README.md: Update boards. 2023-03-22 10:53:02 +01:00
enjoy-digital aa11138cd2
Merge pull request #484 from hansfbaier/master
Support QMTech XC7A75T, XC7A100T, XC7A200T core boards
2023-03-22 10:42:52 +01:00
Hans Baier 40c8e62b09 use bistream compression on those large devices 2023-03-21 09:25:56 +07:00
Hans Baier 0125ae4271 Add support for QMTech Artix7 200T FBG484 board 2023-03-20 08:21:36 +07:00
Hans Baier 98ddb97f5e Support QMTech XC7A75T, XC7A100T core boards 2023-03-20 07:57:58 +07:00
enjoy-digital d6b374b1ff
Merge pull request #482 from Icenowy/tangnano20k
sipeed_tang_nano_20k: new board
2023-03-13 21:21:06 +01:00
Icenowy Zheng 6b8a5d35c0 sipeed_tang_nano_20k: support copackaged SDRAM
The copackaged SDRAM of GW2AR-18 QN88 package is 8MB size, 32bit DQ
width.

Add support for it.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-03-13 17:11:06 +08:00
Icenowy Zheng 291c43b898 sipeed_tang_nano_20k: new board
This board uses Gowin GW2AR series chip (which is GW2A with integrated
RAM).

Support for the integrated SDRAM on Tang Nano 20K is still TODO.

Note: currently when the SD card is enabled, block 0 could be correctly
read but block 1 will fail.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-03-13 16:45:25 +08:00
enjoy-digital 493c38ced3
Merge pull request #480 from maggo1404/master
Update sipeed_tang_nano_9k.py
2023-03-10 12:50:04 +01:00
Marco 28a1aefc21
Update sipeed_tang_nano_9k.py
add pin info for _connectors
2023-03-09 17:57:39 +01:00
Florent Kermarrec bf4f688164 targets/pcie: Update Xilinx S7 constraints. 2023-03-06 12:20:34 +01:00
Florent Kermarrec 1df46d1571 platforms/sipeed_tang_nano_9k: Review SPI RGB LCD addition. 2023-03-06 09:03:12 +01:00
enjoy-digital 801020355f
Merge pull request #479 from maggo1404/master
Update sipeed_tang_nano_9k.py
2023-03-06 08:42:35 +01:00
Marco 8d35591f47
Update sipeed_tang_nano_9k.py
add SPI-Interface for the 1.14inch LCD
2023-03-04 15:25:59 +01:00
Florent Kermarrec 943cf2636f platforms/sipeed_tang_primer_20k: Add checkme on leds IOstandard. 2023-03-02 12:14:04 +01:00
Florent Kermarrec c9a0f5f50b targets/sipeed_tang_primer_20: Ethernet/Etherbone working.
Test:
./sipeed_tang_primer_20k.py --cpu-type=serv --with-etherbone --build --load

ping 192.168.1.50
2023-03-02 12:02:58 +01:00
Florent Kermarrec 4a724d9d2d targets/sipeed_tang_primer_20k/hdmi: Remove pn_swap on data lines that is no longer required. 2023-03-02 11:44:14 +01:00
Florent Kermarrec 9e73ba53ea platforms/sipeed_tang_primer_20k: Update hdmi pins to official dock version and fix compilation.
Test:
./sipeed_tang_primer_20k.py --cpu-type=serv --with-video-terminal --build --load

Working.
2023-03-02 11:39:41 +01:00
Florent Kermarrec 47659835b0 platforms: Switch US/USP platforms to XilinxUS/USPPlatform.
We were still using Xilinx7SeriesPlatform.
2023-03-01 09:37:55 +01:00
Florent Kermarrec 8a6f0bd94f opalkelly_xem8320: Review and update to recent LiteX changes. 2023-03-01 09:16:51 +01:00
enjoy-digital 496857e2c2
Merge pull request #478 from AEW2015/master
Basic SoC for Opal Kelly XEM8320
2023-03-01 08:56:32 +01:00
AEW2015 e20391d366 Basic SoC for Opal Kelly XEM8320 2023-02-28 13:19:12 -07:00
Florent Kermarrec f400179b5b targets: Import all from litex.gen on all targets. 2023-02-23 09:09:33 +01:00
Florent Kermarrec 2eb7419678 targets/machdyne: Switch to LiteXModule for consistency with other targets. 2023-02-23 09:07:06 +01:00
enjoy-digital bd7c4f8424
Merge pull request #477 from machdyne/master
add support for machdyne kopflos board
2023-02-23 08:55:46 +01:00
inc 33cfe59614 add pullups for kopflos ethernet 2023-02-22 08:00:58 +01:00
inc bd20b31a5c add support for machdyne kopflos board 2023-02-21 11:18:22 +01:00
enjoy-digital 9d8dee24c8
Merge pull request #476 from ICE-V-Wireless/master
Add initial support for the ICE-V wireless
2023-02-19 09:38:49 +01:00
Michael Welling b1df2c0f85 Add initial support for the ICE-V wireless
Signed-off-by: Michael Welling <mwelling@ieee.org>
2023-02-19 00:00:07 -06:00