Florent Kermarrec
8fb80053f7
targets/versa_ecp5: Fix LiteEthPHYRMGII tx/rx delays (need to be updated due to a bug fix in the ECP5RGMII PHY).
2021-03-08 17:39:13 +01:00
Gary Wong
99e2f04ee5
Be friendlier about incompatible options.
...
Collect --with-ethernet/--with-etherbone, --with-spi-sdcard/--with-sdcard,
etc. into ArgumentParser.add_mutually_exclusive_group()s. That way, we
get pretty --help output, and appropriate error messages if somebody
tries to ask for something that doesn't make sense.
2021-01-29 18:08:38 -07:00
Hans Baier
0ee62dd681
add etherbone ip address option for relevant boards
2021-01-08 18:44:31 +01:00
Florent Kermarrec
d42af3ea19
targets: add --sys-clk-freq support to all targets.
2020-11-12 18:07:28 +01:00
Florent Kermarrec
bd4e92ad13
targets: cleanup, uniformize build arguments between targets.
2020-11-12 11:46:00 +01:00
Florent Kermarrec
2b17dc1b89
target: add rst signal to CRG to allow full reset of the SoC on reboot command.
2020-11-04 11:13:42 +01:00
Konrad Beckmann
5e67853a21
versa_ecp5: Add --eth-phy to select ethernet phy
...
This also simplifies the logic a bit.
2020-10-09 23:56:16 +02:00
Konrad Beckmann
477734ff06
versa_ecp5: Add etherbone support
...
Etherbone can be enabled with --with-etherbone
2020-10-09 00:53:08 +02:00
Florent Kermarrec
b9ac72cf78
targets: simplify clocking on iCE40/ECP5 targets (AsyncResetSynchronizer now integrated in PLL).
2020-09-01 13:38:32 +02:00
Florent Kermarrec
1781be166a
general: add SPDX License identifier to header and specify files are part of LiteX-Boards.
2020-08-23 15:00:17 +02:00
Florent Kermarrec
869ceadacb
targets: use platform.request_all on LedChaser.
2020-08-06 20:04:03 +02:00
Florent Kermarrec
7a48a61605
targets: add indentifier on all targets.
2020-06-30 18:11:04 +02:00
Florent Kermarrec
1356ebb416
targets/ecp5: update clocking on boards with DDR3 to use reset from ddrphy.init and use primary clock for Power on reset.
2020-06-29 16:42:53 +02:00
Florent Kermarrec
04f6d4463a
versa_ecp5: simplify device (LFE5UM5G or LFE5UM) and adapt integrated_rom_size only for Microwatt.
2020-06-13 11:17:05 +02:00
Raptor Engineering Development Team
90092164c8
Add device option for ECP5 Versa board
...
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
2020-06-12 18:39:43 -05:00
Raptor Engineering Development Team
b1be5dcc23
Fix FTBFS from undersized BIOS ROM region with Microwatt
...
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
2020-06-12 18:39:43 -05:00
Florent Kermarrec
06edf48897
targets: rename gateware-toolchain parameter to toolchain.
2020-06-02 13:45:05 +02:00
Florent Kermarrec
eeba64d7b2
targets: use soc.build_name in load/flash bitstream.
2020-05-21 09:12:29 +02:00
Florent Kermarrec
6f22f082ff
targets: add LedChaser on platforms with user_leds.
...
Default to Chaser mode and similar user interface than GPIOOut.
2020-05-08 22:16:13 +02:00
Florent Kermarrec
2d9543b65e
targets: add build/load parameters on all targets.
2020-05-05 15:11:47 +02:00
Florent Kermarrec
84468c2a63
targets/CRG: platforms are now automatically constraining the input clocks.
2020-05-05 11:51:57 +02:00
Florent Kermarrec
4185a019f5
targets: manual define of the SDRAM PHY is no longer needed.
2020-04-16 11:25:59 +02:00
Florent Kermarrec
3b91e96c42
targets/add_constant: avoid specifying value when value is None (=default)
2020-03-26 09:47:22 +01:00
Florent Kermarrec
3fb3ba18e8
targets: switch to add_ethernet method instead of EthernetSoC.
2020-03-21 18:29:52 +01:00
Florent Kermarrec
83e6fb29f8
targets: switch to SoCCore/add_sdram instead of SoCSDRAM.
2020-03-21 12:43:39 +01:00
Florent Kermarrec
6f517ad1d6
targets/ecp5: make sure all BaseSoC/EthernetSoc default to trellis.
2020-03-05 10:57:59 +01:00
Florent Kermarrec
be5ed35871
targets: default to trellis toolchain on all ECP5 targets (now able to build all supported targets).
2020-02-28 09:46:54 +01:00
Florent Kermarrec
4edf196911
targets/EthernetSoC: be sure memory region is added before adding Wishbone Slave (required by new SoC)
2020-02-11 17:45:35 +01:00
Florent Kermarrec
8211aca2e8
Avoid Official/Partner/Community differentiation: use same directory for all platforms/targets.
...
We initially wanted to provide different level of support for the platforms/targets, mainly
to avoid too much maintenance and let each contributor update its contributed platforms and
targets, but it's easier to update all platforms/targets all-together when LiteX evolves or
changes (and that's what has been done on litex-boards since the creation of the repository).
So let just simplify things and avoid this differentiation.
2020-02-03 09:36:30 +01:00