be77f82720
platforms/xilinx_alveo_u250: Fix dram numbering.
2023-01-16 09:31:23 +01:00
e02f64a7db
platforms/gsd_butterstick: Fix copyright.
2023-01-16 08:41:10 +01:00
718317007e
Merge pull request #470 from gregdavill/gsd_butterstick_additions
...
gsd_butterstick: Add missing pin defs
2023-01-16 08:39:59 +01:00
59a897e2dd
gsd_butterstick: Add missing pin defs
2023-01-16 17:32:39 +10:30
36a4100c8b
ocp_timecard: Add DDR3 SDRAM support.
2023-01-13 12:41:34 +01:00
3ca298ba42
ocp_tap_timecard: Add TODO on SMAs.
2023-01-13 11:51:09 +01:00
c753bf7fc1
ocp_tap_timecard: Fix GTPE2 location.
2023-01-13 11:47:52 +01:00
8b0d4787c7
ocp_tap_timecard: Fix CI.
2023-01-13 10:55:07 +01:00
1e35d78512
ocp_tap_timecard: Add initial SMAIOs peripherals to allow using SMA over PCIe DMA or also with direct (and slow) control/visualization with CSR registers.
2023-01-13 10:08:44 +01:00
fc7154a632
ocp_tap_timecard: Add Leds/I2C/PMOD/GPS/SMAs IOs.
2023-01-13 09:14:05 +01:00
a0fd3e7536
Add initial OCP-TAP TimeCard support with PCIe/SPIFlash/Leds/Buttons/DNA/XADC (Compiles but untested).
2023-01-12 18:50:23 +01:00
3ca0c7a035
Merge pull request #467 from mlaga97/master
...
Allow building digilent_arty using f4pga
2023-01-07 09:49:31 +01:00
7a911b8ff6
Allow building digilent_arty using f4pga
...
Only use XADC() and DNA() functions if vivado is the current toolchain.
2023-01-06 16:09:56 -06:00
6658f20682
Merge pull request #465 from gatecat/vip-fix
...
nx_vip: Add missing 'origin' to SRAM SocRegions
2023-01-04 19:51:11 +01:00
764f64ff1e
nx_vip: Add missing 'origin' to SRAM SocRegions
...
Signed-off-by: gatecat <gatecat@ds0.me>
2023-01-04 12:02:11 +01:00
f5643e7c78
machdyne: Fix LiteDRAM PHYs imports (QuarterRateGENSDRPHY not already working?/integrated).
2023-01-01 21:35:51 +01:00
563ccbd8cf
Merge pull request #464 from machdyne/master
...
initial support for machdyne konfekt and noir
2023-01-01 16:12:51 +01:00
5de6865cbe
Merge pull request #463 from stone3311/master
...
terasic_deca: add SPI SD card support
2023-01-01 16:10:30 +01:00
798faa18df
Merge pull request #462 from jiv4ik/Tang_primer_20K_3690-Dock_3709
...
Correct pinout and IOStandard
2023-01-01 16:09:09 +01:00
fec82c59e2
remove konfekt ethernet option
2022-12-30 17:36:52 +01:00
f0dc9a6874
initial support for machdyne konfekt and noir
2022-12-30 17:00:35 +01:00
6cfb56bb07
terasic_deca: add SPI SD card support
2022-12-28 02:13:06 +01:00
57845d1ca4
Correct pinout and IOStandard
...
Correct connector pinout
Correct pinout for ETH
LED IOStandard set to LVCMOS33
BTN[0] IOStandard set to LVCMOS33
Changes are made based on Tang_primer_20K_3690 and Tang_Primer_20K-Dock_3709 schemes.
2022-12-22 18:30:36 +03:00
4e06e5ff9c
targets/xilinx_zybo_z7: adding missing variant parameter to the platform
2022-12-14 07:47:09 +01:00
a92fdffb35
platforms/digilent_zybo_z7: reorder _io_x & _connectors_x, init cleanup
2022-12-12 22:17:39 +01:00
d28894a4b3
Reintroduce original Zybo + HDMI addition ( #461 )
...
* Reintroduce original Zybo support
* Reintroduce original zybo, add HDMI + fixes for Z7
2022-12-12 22:05:47 +01:00
12db52471d
targets/jungle_electronics_fireant: Update SPIFlash (Make it similar to other boards with BIOS in SPIFlash).
2022-12-08 08:37:13 +01:00
c05ce32c8a
Merge pull request #458 from trabucayre/arty_s7_tcl_config
...
Arty z7 tcl config
2022-12-08 08:31:22 +01:00
71f1e1976b
Merge pull request #459 from tcal-x/icebitsy-ledchaser
...
Add LedChaser to iCEBreaker-bitsy.
2022-12-06 09:05:37 +01:00
8712606d6d
Merge pull request #455 from guissalustiano/master
...
fix: Basys3 V_sync is pin R19
2022-12-06 09:04:45 +01:00
25c40ddda7
add gpio to board
2022-12-05 21:38:56 -03:00
6e205be83b
Add LedChaser to iCEBreaker-bitsy.
...
Signed-off-by: Tim Callahan <tcal@google.com>
2022-12-04 17:58:20 -08:00
a889321535
targets/digilent_arty_z7: adding note to load gateware and bios
2022-12-03 16:54:52 +01:00
e71e3ab3ec
platforms,targets/digilent_arty_z7: use a dict for PS config instead of fetching file configuration
2022-12-03 16:54:39 +01:00
d0d90e9eef
Merge branch 'litex-hub:master' into master
2022-11-29 15:25:41 -03:00
b030630237
Merge pull request #453 from cklarhorst/zybo
...
Zybo: Fix for Zynq7000 and use ps7 as submodule for Soft-CPUs
2022-11-25 21:48:43 +01:00
53b6bf035a
fixed parser
2022-11-24 16:03:12 +01:00
926ed21f0b
fixed review remarks; added zynq7000 as a submodule for using the ps as a slave
2022-11-23 17:20:25 +01:00
570ea11744
fix(plataform.basys_3): V_sync is pin R19
...
Based in https://github.com/Digilent/digilent-xdc/blob/master/Basys-3-Master.xdc#LL129C34-L129C37
2022-11-23 09:16:50 -03:00
888b52d838
Merge pull request #452 from Icenowy/im1283-enh
...
Some small enhancements to iSX iM1283
2022-11-22 16:11:02 +01:00
c489347a51
fixed zynq7000 integration; introduced option to add the processing-system as slave to the SoC
2022-11-18 11:19:57 +01:00
6f7716adbb
added config for ps7; introduced different variants for the zybo-board; fixed pins
2022-11-18 11:15:54 +01:00
892bf3546d
isx_im1283: connect CRG reset to PLL
...
This fixes soft reset.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-11-16 15:12:18 +08:00
e27d8c958e
isx_im1283: add jtagbone support
...
Add necessary script snippets for enabling jtagbone in the command line.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-11-15 21:07:10 +08:00
ae47172d2a
targets/decklink_mini_4k: Update clock constraints.
2022-11-14 10:21:42 +01:00
6e10df234f
platforms/decklink_mini_4k: Fix data2_n pin (Thanks @rdolbeau).
2022-11-14 10:21:37 +01:00
169ce9e3d0
Merge pull request #450 from Icenowy/stlv7325-enh
...
Some enhancements to STLV7325 target code
2022-11-14 10:05:13 +01:00
e9d7013d70
sitlinv_stlv7325: add jtagbone support
...
Add necessary script snippets for enabling jtagbone in the command line.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-11-13 17:28:04 +08:00
c2c59f5e8c
sitlinv_stlv7325: allow to set local/remote ip
...
Port the script snippet from Colorlight i5 for setting the local/remote
IP address to STLV7325.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-11-13 17:27:58 +08:00
3d8106f84d
stlv7325: fix Ethernet IO voltages
...
The IO voltages of Ethernet pins is set to 2.5V instead of 1.5V.
Fix this in the platform definition.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-11-13 17:27:23 +08:00
Florent Kermarrec
Greg Davill
Luc Lagarde
gatecat
inc
stone3311
jiv4ik
Gwenhael Goavec-Merou
JoyBed
Guilherme Salustiano
Tim Callahan
Guilherme Salustiano
mkuhn99
Icenowy Zheng